Download or read book Process Control and Interface Optimisation of Carbon Fibre PEEK Matrix Composites written by Shanglin Gao and published by . This book was released on 1999 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICCM VI written by F. L. Matthews and published by . This book was released on 1987 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Interfaces in Fiber Reinforced Composites written by Jang-Kyo Kim and published by Elsevier. This book was released on 1998-10-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume.The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces.The book contains eight chapters of discussions on microstructure-property relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intralaminar strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stability during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.
Download or read book Material Characterisation and Interface Optimisation of Recycled Carbon Fibre Composites written by Jack Howarth and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites manufactured from a novel non-woven veil of recycled carbon fibre were tested in longitudinal tension, 3-point bend and short beam shear to assess their mechanical properties with respect to other commonly available materials. It was found that their mechanical properties were intermediate between 'high-end' unidirectional pre-preg and 'low-end' chopped strand mat, and similar to that of other short-fibre reinforced plastics. A range of oxygen plasma treatments were carried out on the fibres to improve interfacial performance of the composites. It was found that treatment at an intermediate plasma power of 20 W resulted in the greatest improvement in tensile strength of a 10° off-axis composite. Samples were manufactured from either 2 individual veils (IV) or from 2, 10-layer 'pre-forms' (PF). Both exhibited similar improvements in 10° off-axis strength. Thus shadowing of the fibre within the plasma did not appear to be significant. Overtreatment at higher plasma powers (35 and 50 W for IV and 50 W for PF) resulted in a significant reduction in tensile strength and failure strain. X-ray Photoelectron Spectroscopy (XPS) showed that plasma treatment at 20 W resulted in the highest level of oxygen functionality on the fibre surface, correlating with the best interfacial performance. Plasma treatment at 10 and 35 W resulted in slightly elevated surface oxygen content, however the off-axis tensile properties of 10 W treated samples were not significantly improved compared to the untreated control. The poor mechanical performance of the over-treated samples can be attributed to either an overly strong interface resulting from increased adhesion or damage to the fibres as a result of the treatment process. There were large variations in fibre wettability across treatments, such that no discernible pattern was present between wettability and interfacial performance. XPS and ToF-SIMS analysis showed that there was almost complete coverage of the veil by the binder in the veil-making process, and that silicon contamination on the fibre itself is likely silica based, and that silicon present in the binder is PDMS.
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Optimization of the Processing of PEEK carbon Composites written by J. Denault and published by . This book was released on 1990 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2000 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Erian A. Armanios and published by ASTM International. This book was released on 1997 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Composite Interfaces written by Hatsuo Ishida and published by North Holland. This book was released on 1986 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoplastic Aromatic Polymer Composites written by Frederic Neil Cogswell and published by Elsevier. This book was released on 2013-10-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic Aromatic Polymer Composites: A Study of the Structure, Processing and Properties of Carbon Fibre Reinforced Polyetheretherketone and Related Materials deals with the field of thermoplastic composite materials through a study of carbon fiber reinforced polyetheretherketone. The book is composed of twelve chapters. The first four chapters are an introduction and basic learning of thermoplastic composite materials. These chapters include discussions on the components of thermoplastics, product forms, and the microstructure of aromatic polymer composites. The processing and manufacturing technology, including the fundamental operations, control, and the wide implications of manufacturing the composite material, are analyzed. The service performance structure of three interactions, namely, material, design, and processing, are illustrated. The strength of thermoplastic composites is then considered through an analysis of both shear and extensions with elastic modulus, but in the case of material strength, the differences between tension and compression properties should be taken into account. The book also notes that the durability, temperature sensitivity, and environmental resistance should likewise be regarded for a structural composite to have practical value and satisfactory performance. Lastly, the text explains that the numerous applications of thermoplastic structural composites, such as in medicine, aviation, marine and space technology, automotive, and industrial machinery, are all important and a rigorous evaluation is therefore necessary. The book finally suggests that the research into the future developments in the thermoplastic structural composites and the trend toward new design strategies and processing technology are important in optimizing the composite's great potential. Industrial researchers in the field of chemistry and polymer composites, students, and academicians interested in the design and application of polymer composites will find this book relevant.
Download or read book The Structural Integrity of Carbon Fiber Composites written by Peter W. R Beaumont and published by Springer. This book was released on 2016-11-26 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a diverse compilation of inter-disciplinary chapters on fundamental aspects of carbon fiber composite materials and multi-functional composite structures: including synthesis, characterization, and evaluation from the nano-structure to structure meters in length. The content and focus of contributions under the umbrella of structural integrity of composite materials embraces topics at the forefront of composite materials science and technology, the disciplines of mechanics, and development of a new predictive design methodology of the safe operation of engineering structures from cradle to grave. Multi-authored papers on multi-scale modelling of problems in material design and predicting the safe performance of engineering structure illustrate the inter-disciplinary nature of the subject. The book examines topics such as Stochastic micro-mechanics theory and application for advanced composite systems Construction of the evaluation process for structural integrity of material and structure Nano- and meso-mechanics modelling of structure evolution during the accumulation of damage Statistical meso-mechanics of composite materials Hierarchical analysis including "age-aware," high-fidelity simulation and virtual mechanical testing of composite structures right up to the point of failure. The volume is ideal for scientists, engineers, and students interested in carbon fiber composite materials, and other composite material systems.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interface Characterization of Carbon fiber reinforced Glass Matrix Composites written by Paul Martin Benson and published by . This book was released on 1988 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Composites Industry Abstracts written by and published by . This book was released on 1996 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
