Download or read book Proceedings of the Third Workshop on Parallel and Distributed Real Time Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1995 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 17th Annual International Symposium on High Performance Computing Systems and Applications and the OSCAR Symposium written by National Research Council Canada and published by NRC Research Press. This book was released on 2003 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th annual International Symposium on High Performance Systems and Applications (HPCS 2003) and the first OSCAR Symposium were held in Sherbrooke, Quebec Canada, May 11-14, 2003. The proceedings cover various areas of High Performance Computing, from specific scientific applications to computer architecture. OSCAR is an Open Source clustering software suite for building, maintaining, and using high performance clusters.
Download or read book Parallel and Distributed Real time Systems written by Jan van Katwijk and published by Nova Biomedical Books. This book was released on 2001 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel & Distributed Real-Time Systems
Download or read book EUC 2004 written by Laurence T. Yang and published by Springer Science & Business Media. This book was released on 2004-08-18 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Conference on Embedded and Ubiquitous Computing, EUC 2004, held in Aizu-Wakamatsu City, Japan, in August 2004. The 104 revised full papers presented were carefully reviewed and selected from more than 260 submissions. The papers are organized in topical sections on embedded hardware and software; real-time systems; power-aware computing; hardware/software codesign and systems-on-chip; mobile computing; wireless communication; multimedia and pervasive computing; agent technology and distributed computing, network protocols, security, and fault-tolerance; and middleware and peer-to-peer computing.
Download or read book Handbook of Real Time and Embedded Systems written by Insup Lee and published by CRC Press. This book was released on 2007-07-23 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time and embedded systems are essential to our lives, from controlling car engines and regulating traffic lights to monitoring plane takeoffs and landings to providing up-to-the-minute stock quotes. Bringing together researchers from both academia and industry, the Handbook of Real-Time and Embedded Systems provides comprehensive covera
Download or read book Handbook of Real Time Computing written by Yu-Chu Tian and published by Springer Nature. This book was released on 2022-08-08 with total page 1511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this handbook is to summarize the recent rapidly developed real-time computing technologies, from theories to applications. This handbook benefits the readers as a full and quick technical reference with a high-level historic review of technology, detailed technical descriptions and the latest practical applications. In general, the handbook is divided into three main parts (subjected to be modified): theory, design, and application covering different but not limited to the following topics: - Real-time operating systems - Real-time scheduling - Timing analysis - Programming languages and run-time systems - Middleware systems - Design and analysis tools - Real-time aspects of wireless sensor networks - Energy aware real-time methods
Download or read book Parallel and Distributed Processing written by Jose Rolim and published by Springer Science & Business Media. This book was released on 2000-04-19 with total page 1332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings from the workshops held in conjunction with the IEEE International Parallel and Distributed Processing Symposium, IPDPS 2000, on 1-5 May 2000 in Cancun, Mexico. The workshopsprovidea forum for bringing together researchers,practiti- ers, and designers from various backgrounds to discuss the state of the art in parallelism.Theyfocusondi erentaspectsofparallelism,fromruntimesystems to formal methods, from optics to irregular problems, from biology to networks of personal computers, from embedded systems to programming environments; the following workshops are represented in this volume: { Workshop on Personal Computer Based Networks of Workstations { Workshop on Advances in Parallel and Distributed Computational Models { Workshop on Par. and Dist. Comp. in Image, Video, and Multimedia { Workshop on High-Level Parallel Prog. Models and Supportive Env. { Workshop on High Performance Data Mining { Workshop on Solving Irregularly Structured Problems in Parallel { Workshop on Java for Parallel and Distributed Computing { WorkshoponBiologicallyInspiredSolutionsto ParallelProcessingProblems { Workshop on Parallel and Distributed Real-Time Systems { Workshop on Embedded HPC Systems and Applications { Recon gurable Architectures Workshop { Workshop on Formal Methods for Parallel Programming { Workshop on Optics and Computer Science { Workshop on Run-Time Systems for Parallel Programming { Workshop on Fault-Tolerant Parallel and Distributed Systems All papers published in the workshops proceedings were selected by the p- gram committee on the basis of referee reports. Each paper was reviewed by independent referees who judged the papers for originality, quality, and cons- tency with the themes of the workshops.
Download or read book Real Time Systems written by Albert M. K. Cheng and published by John Wiley & Sons. This book was released on 2003-03-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a comprehensive overview of the subject rather than a collection of papers. The author is a recognized authority in the field as well as an outstanding teacher lauded for his ability to convey these concepts clearly to many different audiences. A handy reference for practitioners in the field.
Download or read book Advances in Real Time Systems written by Samarjit Chakraborty and published by Springer Science & Business Media. This book was released on 2012-02-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures given in honor to Georg Färber as tribute to his contributions in the area of real-time and embedded systems. The chapters of many leading scientists cover a wide range of aspects, like robot or automotive vision systems or medical aspects.
Download or read book Operating Systems and Services written by Ragunathan Rajkumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating Systems and Services brings together in one place important contributions and up-to-date research results in this fast moving area. Operating Systems and Services serves as an excellent reference, providing insight into some of the most challenging research issues in the field.
Download or read book Applied System Simulation written by Mohammad S. Obaidat and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation and molding are efficient techniques that can aid the city and regional planners and engineers in optimizing the operation of urban systems such as traffic light control, highway toll automation, consensus building, public safety, and environmental protection. When modeling transportation systems such as freeway systems, arterial or downtown grid systems, the city planner and engineer is concerned with capturing the varied interactions between drivers, automobiles, and the infrastructure. Modeling and simulation are used to effectively optimize the design and operation of all of these urban systems. It is possible that in an urban simulation community workshop, citizens can work interactively in front of computers and be able using the click of the mouse to walk up to their own front porch, looking at the proposed shopping mall alternatives across the street from virtually any angle and proposed bridge or tunnel and see how it can reduce traffic congestion. Buildings can be scaled down or taken out, their orientation can be changed in order to check the view and orientation in order to have better site with efficient energy-conservation. The stone or brick material on a building can be replaced by colored concrete, or more trees and lampposts can be placed on the site. Such flexibility in simulation and animation allows creative ideas in the design and orientation of urban sites to be demonstrated to citizens and decision makers before final realization.
Download or read book Architecting Dependable Systems IV written by Rogério de Lemos and published by Springer Science & Business Media. This book was released on 2007-08-15 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: As software systems become ubiquitous, the issues of dependability become more and more crucial. This state-of-the-art survey contains 18 expanded and peer-reviewed papers based on the carefully selected contributions to the Workshop on Architecting Dependable Systems (WADS 2006) organized at the 2006 International Conference on Dependable Systems and Networks (DSN 2006), held in Philadelphia, PA, USA, in June 2006.
Download or read book Development of Distributed Systems from Design to Application and Maintenance written by Bessis, Nik and published by IGI Global. This book was released on 2012-12-31 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is a collection of research on the strategies used in the design and development of distributed systems applications"--Provided by publisher.
Download or read book Embedded and Networking Systems written by Gul N. Khan and published by CRC Press. This book was released on 2017-07-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded and Networking Systems: Design, Software, and Implementation explores issues related to the design and synthesis of high-performance embedded computer systems and networks. The emphasis is on the fundamental concepts and analytical techniques that are applicable to a range of embedded and networking applications, rather than on specific embedded architectures, software development, or system-level integration. This system point of view guides designers in dealing with the trade-offs to optimize performance, power, cost, and other system-level non-functional requirements. The book brings together contributions by researchers and experts from around the world, offering a global view of the latest research and development in embedded and networking systems. Chapters highlight the evolution and trends in the field and supply a fundamental and analytical understanding of some underlying technologies. Topics include the co-design of embedded systems, code optimization for a variety of applications, power and performance trade-offs, benchmarks for evaluating embedded systems and their components, and mobile sensor network systems. The book also looks at novel applications such as mobile sensor systems and video networks. A comprehensive review of groundbreaking technology and applications, this book is a timely resource for system designers, researchers, and students interested in the possibilities of embedded and networking systems. It gives readers a better understanding of an emerging technology evolution that is helping drive telecommunications into the next decade.
Download or read book Encyclopedia of Software Engineering Three Volume Set Print written by Phillip A. Laplante and published by CRC Press. This book was released on 2010-11-22 with total page 1441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software engineering requires specialized knowledge of a broad spectrum of topics, including the construction of software and the platforms, applications, and environments in which the software operates as well as an understanding of the people who build and use the software. Offering an authoritative perspective, the two volumes of the Encyclopedia of Software Engineering cover the entire multidisciplinary scope of this important field. More than 200 expert contributors and reviewers from industry and academia across 21 countries provide easy-to-read entries that cover software requirements, design, construction, testing, maintenance, configuration management, quality control, and software engineering management tools and methods. Editor Phillip A. Laplante uses the most universally recognized definition of the areas of relevance to software engineering, the Software Engineering Body of Knowledge (SWEBOK®), as a template for organizing the material. Also available in an electronic format, this encyclopedia supplies software engineering students, IT professionals, researchers, managers, and scholars with unrivaled coverage of the topics that encompass this ever-changing field. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Intelligent Components and Instruments for Control Applications 2003 SICICA 2003 written by L. Almeida and published by Elsevier. This book was released on 2003 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Proceedings volume from the IFAC Symposium on Intelligent Components and Instruments for Control Applications, Portugal, 2003. Provides an overview of the theory and applications and presents an exchange of experiences on recent advances in this field.
Download or read book High Performance Computing HiPC 2008 written by P. Sadayappan and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International Conference on High-Performance Computing, HiPC 2008, held in Bangalore, India, in December 2008. The 46 revised full papers presented together with the abstracts of 5 keynote talks were carefully reviewed and selected from 317 submissions. The papers are organized in topical sections on applications performance optimizazion, parallel algorithms and applications, scheduling and resource management, sensor networks, energy-aware computing, distributed algorithms, communication networks as well as architecture.
