Download or read book Proceedings of the Solar 2003 Conference written by Rebecca Campbell-Howe and published by . This book was released on 2003 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonimaging Optics in Solar Energy written by Joseph O'Gallagher and published by Springer Nature. This book was released on 2022-05-31 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonimaging optics is a subdiscipline of optics whose development over the last 35–40 years was led by scientists from the University of Chicago and other cooperating individuals and institutions. The approach provides a formalism that allows the design of optical devices that approach the maximum physically attainable geometric concentration for a given set of optical tolerances. This means that it has the potential to revolutionize the design of solar concentrators. In this monograph, the basic practical applications of the techniques of nonimaging optics to solar energy collection and concentration are developed and explained. The formalism for designing a wide variety of concentrator types, such as the compound parabolic concentrator and its many embodiments and variations, is presented. Both advantages and limitations of the approach are reviewed. Practical and economic aspects of concentrator design for both thermal and photovoltaic applications are discussed as well. The whole range of concentrator applications from simple low-concentration nontracking designs to ultrahigh-concentration multistage configurations is covered. Table of Contents: Introduction / CPCs / Practical Design of CPC Thermal Collectors / Practical Design of CPC PV Concentrators / Two-Stage Nonimaging Concentrators for Solar Thermal Applications / Two-Stage Nonimaging Concentrators for Solar PV Applications / Selected Demonstrations of Nonimaging Concentrator Performance / The Importance of Economic Factors in Effective Solar Concentrator Design / Ultrahigh Concentration / Bibliography
Download or read book Solar Energy Engineering written by Soteris A Kalogirou and published by Academic Press. This book was released on 2009-07-22 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: As perhaps the most promising of all the renewable energy sources available today, solar energy is becoming increasingly important in the drive to achieve energy independence and climate balance. This new book is the masterwork from world-renowned expert Dr. Soteris Kalogirou, who has championed solar energy for decades. The book includes all areas of solar energy engineering, from the fundamentals to the highest level of current research. The author includes pivotal subjects such as solar collectors, solar water heating, solar space heating and cooling, industrial process heat, solar desalination, photovoltaics, solar thermal power systems, and modeling of solar systems, including the use of artificial intelligence systems in solar energy systems, modeling and performance prediction. *Written by one of the world's most renowned experts in solar energy*Covers the hottest new developments in solar technology, such as solar cooling and desalination*Packed with quick look up tables and schematic diagrams for the most commonly used systems today'
Download or read book Energy Conversion written by D. Yogi Goswami and published by CRC Press. This book was released on 2007-07-06 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing methods for maximizing available energy, Energy Conversion surveys the latest advances in energy conversion from a wide variety of currently available energy sources. The book describes energy sources such as fossil fuels, biomass including refuse-derived biomass fuels, nuclear, solar radiation, wind, geothermal, and ocean, then provides the terminology and units used for each energy resource and their equivalence. It includes an overview of the steam power cycle, gas turbines, internal combustion engines, hydraulic turbines, Stirling engines, advanced fossil fuel power systems, and combined-cycle power plants. It outlines the development, current use, and future of nuclear fission. The book also gives a comprehensive description of the direct energy conversion methods, including, Photovoltaics, Fuel Cells, Thermoelectric conversion, Thermionics and MHD It briefly reviews the physics of PV electrical generation, discusses the PV system design process, presents several PV system examples, summarizes the latest developments in crystalline silicon PV, and explores some of the present challenges facing the large scale deployment of PV energy sources. The book discusses five energy storage categories: electrical, electromechanical, mechanical, direct thermal, and thermochemical and the storage media that can store and deliver energy. With contributions from researchers at the top of their fields and on the cutting edge of technologies, the book provides comprehensive coverage of end use efficiency of green technology. It includes in-depth discussions not only of better efficient energy management in buildings and industry, but also of how to plan and design for efficient use and management from the ground up.
Download or read book ECOS 2012 The 25th International Conference on Efficiency Cost Optimization and Simulation of Energy Conversion Systems and Processes Perugia June 26th June 29th 2012 written by Umberto Desideri and published by Firenze University Press. This book was released on 2012 with total page 3218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8-volume set contains the Proceedings of the 25th ECOS 2012 International Conference, Perugia, Italy, June 26th to June 29th, 2012. ECOS is an acronym for Efficiency, Cost, Optimization and Simulation (of energy conversion systems and processes), summarizing the topics covered in ECOS: Thermodynamics, Heat and Mass Transfer, Exergy and Second Law Analysis, Process Integration and Heat Exchanger Networks, Fluid Dynamics and Power Plant Components, Fuel Cells, Simulation of Energy Conversion Systems, Renewable Energies, Thermo-Economic Analysis and Optimisation, Combustion, Chemical Reactors, Carbon Capture and Sequestration, Building/Urban/Complex Energy Systems, Water Desalination and Use of Water Resources, Energy Systems- Environmental and Sustainability Issues, System Operation/ Control/Diagnosis and Prognosis, Industrial Ecology.
Download or read book Proceedings of the Solar 2002 Conference written by Solar Conference and published by . This book was released on 2002 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Neutral Architectural Design written by Pablo M. La Roche and published by CRC Press. This book was released on 2016-04-19 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy used to operate buildings is one of the most significant sources of greenhouse gas emissions. To lessen the human impact on climate, it is necessary to reduce these building-related emissions. New legislation, as well as market and financial pressures, are driving architects and developers to create low-carbon buildings. While it is possible to achieve many of these reductions through appropriate climate-responsive design, many architects are not trained to do this. Filling an urgent need for a design reference in this emerging field, Carbon-Neutral Architectural Design describes how to reduce building-related greenhouse gas emissions through appropriate design techniques. This full-color book presents strategies and methods to achieve CO2 reductions, with an emphasis on control of energy flows through the building envelope and passive heating and cooling strategies. Strategies for Designing Buildings with a Smaller Carbon Footprint Examining climate change and its relationship with buildings, the book begins with a look at the sources of emissions and how these are produced as a result of interactions between buildings and the surrounding environment. It then introduces a carbon-neutral architectural design process (CNDP) and a roadmap that can be adjusted for different types of projects. Discussing climate analysis and solar geometry, the book explores how understanding the climate where a building is located helps to identify the design strategies that are best suited to that location—whether warm and humid, warm and dry, temperate, or cold. It looks at psychrometrics and how to achieve thermal comfort with minimum emissions. The book also explains how building fabric can be used to control energy flows by conduction, radiation, and convection—helping to reduce overheating and overcooling—and how to incorporate passive cooling and heating systems through appropriate design. The book includes useful references, equations, and illustrations, as well as a comparison of free carbon counting tools that can be used for residential building design. Drawing on the author’s extensive experience in teaching and practice, this is a valuable resource for anyone who wants to reduce the carbon footprint of buildings. Find more study resources at the American Institute of Architects’ Carbon Neutral Design Project web site. What’s next for green building? See what Dr. La Roche has to say in this video on the HMC Architects blog.
Download or read book Comprehensive Semiconductor Science and Technology written by and published by Newnes. This book was released on 2011-01-28 with total page 3572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors are at the heart of modern living. Almost everything we do, be it work, travel, communication, or entertainment, all depend on some feature of semiconductor technology. Comprehensive Semiconductor Science and Technology, Six Volume Set captures the breadth of this important field, and presents it in a single source to the large audience who study, make, and exploit semiconductors. Previous attempts at this achievement have been abbreviated, and have omitted important topics. Written and Edited by a truly international team of experts, this work delivers an objective yet cohesive global review of the semiconductor world. The work is divided into three sections. The first section is concerned with the fundamental physics of semiconductors, showing how the electronic features and the lattice dynamics change drastically when systems vary from bulk to a low-dimensional structure and further to a nanometer size. Throughout this section there is an emphasis on the full understanding of the underlying physics. The second section deals largely with the transformation of the conceptual framework of solid state physics into devices and systems which require the growth of extremely high purity, nearly defect-free bulk and epitaxial materials. The last section is devoted to exploitation of the knowledge described in the previous sections to highlight the spectrum of devices we see all around us. Provides a comprehensive global picture of the semiconductor world Each of the work's three sections presents a complete description of one aspect of the whole Written and Edited by a truly international team of experts
Download or read book Systems Controls Embedded Systems Energy and Machines written by Richard C. Dorf and published by CRC Press. This book was released on 2017-12-19 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has expanded into a set of six books carefully focused on a specialized area or field of study. Each book represents a concise yet definitive collection of key concepts, models, and equations in its respective domain, thoughtfully gathered for convenient access. Systems, Controls, Embedded Systems, Energy, and Machines explores in detail the fields of energy devices, machines, and systems as well as control systems. It provides all of the fundamental concepts needed for thorough, in-depth understanding of each area and devotes special attention to the emerging area of embedded systems. Each article includes defining terms, references, and sources of further information. Encompassing the work of the world's foremost experts in their respective specialties, Systems, Controls, Embedded Systems, Energy, and Machines features the latest developments, the broadest scope of coverage, and new material on human-computer interaction.
Download or read book Organic Nanostructured Thin Film Devices and Coatings for Clean Energy written by Sam Zhang and published by CRC Press. This book was released on 2010-06-18 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by leading experts from around the world, the three-volume Handbook of Nanostructured Thin Films and Coatings gives scientific researchers and product engineers a resource as dynamic and flexible as the field itself. The first two volumes cover the latest research and application of the mechanical and functional properties of thin films an
Download or read book Modern Trends in Physics Research written by and published by World Scientific. This book was released on 2011 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Design for Space Operations written by Tommaso Sgobba and published by Elsevier Inc. Chapters. This book was released on 2013-03-24 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter deals with some key topics of orbital safety. It starts with an overview of the issue of space traffic control and space situational awareness, and then proceeds to address conjunction analyses and collision avoidance maneuvers (CAM), including for the International Space Station. Another kind of collision risk discussed is the jettison of discarded hardware. The chapter then covers rendezvous and docking/berthing operations. Collision safety risks, their causes and consequences, and the measures for protection are discussed in detail. The chapter also covers the issues of space vehicles charging and contamination hazards, including the shock hazard for astronauts involved in extravehicular activities. Finally, the chapter presents end-of life mitigation measures and techniques for space debris removal, such as space tugs, drag devices and electrodynamic propulsion.
Download or read book Renewable Energy written by Bent Sorensen and published by Routledge. This book was released on 2018-12-14 with total page 2216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume set, edited by a leading expert in the field, brings together in one collection a series of papers that have been fundamental to the development of renewable energy as a defined discipline. Some of the papers were first published many years ago, but they remain classics in their fields and retain their relevance to the understanding of current issues. The papers have been selected with the assistance of an eminent international editorial board. The set includes a general introduction and each volume is introduced by a new overview essay, placing the selected papers in context. The range of subject matter is considerable, including coverage of all the main renewable technologies, the fundamental principles by which they function, and the issues around their deployment such as planning, integration and socio-economic assessment. Overall, the set provides students, teachers and researchers, confronted with thousands of journal articles, book chapters and grey literature stretching back decades, with a ready-made selection of and commentary on the most important key writings in renewable energy. It will be an essential reference for libraries concerned with energy, technology and the environment.
Download or read book Solar Neutrons and Related Phenomena written by Lev Dorman and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Short Historical Overview In the 1940s, two phenomena in the ?eld of cosmic rays (CR) forced scientists to think that the Sun is a powerful source of high-energy particles. One of these was discovered because of the daily solar variation of CR, which the maximum number of CR observed near noon (referring to the existence of continuous ?ux of CR from the direction of the Sun); this became the experimental basis of the theory that CR’s ́ originate from the Sun (or, for that matter, from within the solar system) (Alfven 1954). The second phenomenon was discovered when large ?uxes of high energy particles were detected from several solar ?ares, or solar CR. These are the - called ground level events (GLE), and were ?rst observed by ionization chambers shielded by 10 cm Pb (and detected mainly from the secondary muon-component CR that they caused) during the events of the 28th of February 1942, the 7th of March 1942, the 25th of July 1946, and the 19th of November 1949. The biggest such event was detected on the 23rd of February 1956 (see the detailed description in Chapters X and XI of Dorman, M1957). The ?rst phenomenon was investigated in detail in Dorman (M1957), by ?rst correcting experimental data on muon temperature effects and then by using coupling functions to determine the change in particle energy caused by the solar-diurnal CR variation.
Download or read book Solar 90 written by American Solar Energy Society. Meeting and published by . This book was released on 1990 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Energy written by Yatish T. Shah and published by CRC Press. This book was released on 2018-01-12 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book details sources of thermal energy, methods of capture, and applications. It describes the basics of thermal energy, including measuring thermal energy, laws of thermodynamics that govern its use and transformation, modes of thermal energy, conventional processes, devices and materials, and the methods by which it is transferred. It covers 8 sources of thermal energy: combustion, fusion (solar) fission (nuclear), geothermal, microwave, plasma, waste heat, and thermal energy storage. In each case, the methods of production and capture and its uses are described in detail. It also discusses novel processes and devices used to improve transfer and transformation processes.
