Download or read book Robust Control of Linear Systems and Nonlinear Control written by M. A. Kaashoek and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Symposium MTNS 89 Robust control of linear systems and nonlinear control written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robust Control of Linear Systems and Nonlinear Control written by M. A. Kaashoek and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the second of the three volume publication containing the proceedings of the 1989 International Symposium on the Mathemat ical Theory of Networks and Systems (MTNS-89), which was held in Amsterdam, The Netherlands, June 19-23, 1989 The International Symposia MTNS focus attention on problems from system and control theory, circuit theory and signal processing, which, in general, require application of sophisticated mathematical tools, such as from function and operator theory, linear algebra and matrix theory, differential and algebraic geometry. The interaction between advanced mathematical methods and practical engineering problems of circuits, systems and control, which is typical for MTNS, turns out to be most effective and is, as these proceedings show, a continuing source of exciting advances. The second volume contains invited papers and a large selection of other symposium presentations in the vast area of robust and nonlinear control. Modern developments in robust control and H-infinity theory, for finite as well as for infinite dimensional systems, are presented. A large part of the volume is devoted to nonlinear control. Special atten tion is paid to problems in robotics. Also the general theory of nonlinear and infinite dimensional systems is discussed. A couple of papers deal with problems of stochastic control and filterina. vi Preface The titles of the two other volumes are: Realization and Modelling in System Theory (volume 1) and Signal Processing, Scattering and Operator Theory, and Numerical Methods (volume 3).
Download or read book Robust Control of Linear Systems and Nonlinear Control written by M. A. Kaashoek and published by Springer Science & Business Media. This book was released on 1990 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the second of the three volume publication containing the proceedings of the 1989 International Symposium on the Mathemat ical Theory of Networks and Systems (MTNS-89), which was held in Amsterdam, The Netherlands, June 19-23, 1989 The International Symposia MTNS focus attention on problems from system and control theory, circuit theory and signal processing, which, in general, require application of sophisticated mathematical tools, such as from function and operator theory, linear algebra and matrix theory, differential and algebraic geometry. The interaction between advanced mathematical methods and practical engineering problems of circuits, systems and control, which is typical for MTNS, turns out to be most effective and is, as these proceedings show, a continuing source of exciting advances. The second volume contains invited papers and a large selection of other symposium presentations in the vast area of robust and nonlinear control. Modern developments in robust control and H-infinity theory, for finite as well as for infinite dimensional systems, are presented. A large part of the volume is devoted to nonlinear control. Special atten tion is paid to problems in robotics. Also the general theory of nonlinear and infinite dimensional systems is discussed. A couple of papers deal with problems of stochastic control and filterina. vi Preface The titles of the two other volumes are: Realization and Modelling in System Theory (volume 1) and Signal Processing, Scattering and Operator Theory, and Numerical Methods (volume 3).
Download or read book Robust Control of Linear Systems and Nonlinear Control written by M. A. Kaashoek and published by Birkhäuser. This book was released on 2012-01-26 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the second of the three volume publication containing the proceedings of the 1989 International Symposium on the Mathemat ical Theory of Networks and Systems (MTNS-89), which was held in Amsterdam, The Netherlands, June 19-23, 1989 The International Symposia MTNS focus attention on problems from system and control theory, circuit theory and signal processing, which, in general, require application of sophisticated mathematical tools, such as from function and operator theory, linear algebra and matrix theory, differential and algebraic geometry. The interaction between advanced mathematical methods and practical engineering problems of circuits, systems and control, which is typical for MTNS, turns out to be most effective and is, as these proceedings show, a continuing source of exciting advances. The second volume contains invited papers and a large selection of other symposium presentations in the vast area of robust and nonlinear control. Modern developments in robust control and H-infinity theory, for finite as well as for infinite dimensional systems, are presented. A large part of the volume is devoted to nonlinear control. Special atten tion is paid to problems in robotics. Also the general theory of nonlinear and infinite dimensional systems is discussed. A couple of papers deal with problems of stochastic control and filterina. vi Preface The titles of the two other volumes are: Realization and Modelling in System Theory (volume 1) and Signal Processing, Scattering and Operator Theory, and Numerical Methods (volume 3).
Download or read book Robustness of Dynamic Systems with Parameter Uncertainties written by Mohamed Mansour and published by Birkhäuser. This book was released on 2012-12-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control is one of the fastest growing and promising areas of research today. In many practical systems there exist uncertainties which have to be considered in the analysis and design of control systems. In the last decade methods were developed for dealing with dynamic systems with unstructured uncertainties such as HOO_ and £I-optimal control. For systems with parameter uncertainties, the seminal paper of V. L. Kharitonov has triggered a large amount of very promising research. An international workshop dealing with all aspects of robust control was successfully organized by S. P. Bhattacharyya and L. H. Keel in San Antonio, Texas, USA in March 1991. We organized the second international workshop in this area in Ascona, Switzer land in April 1992. However, this second workshop was restricted to robust control of dynamic systems with parameter uncertainties with the objective to concentrate on some aspects of robust control. This book contains a collection of papers presented at the International Workshop on Robust Control held at the Centro Stefano Franscini, Monte Verita, Ascona, Switzer land on April 12-17, 1992 as well as a list of open problems presented during a dis cussion session at the workshop. Thirtyfive leading researchers from all over the world working in the area of robust control of dynamic systems with parameter uncertainties were invited to present their recent results and to discuss with their colleagues the recent advances in this field.
Download or read book Advances in Nonlinear Dynamics and Control A Report from Russia written by Alexander B. Kurzhanski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this volume is to present a coherent collection of overviews of recent Russian research in Control Theory and Nonlinear Dynamics written by active investigators in these fields. It is needless to say that the contribution of the scientists of the former Soviet Union to the development of nonlinear dynamics and control was significant and that their scientific schools and research community have highly evolved points of view, accents and depth which complemented, enhanced and sometimes inspired research directions in the West. With scientific exchange strongly increasing, there is still a consider able number of Eastern publications unknown to the Western community. We have therefore encouraged the authors to produce extended bibliogra phies in their papers. The particular emphasis of this volume is on the treatment of uncer tain systems in a deterministic setting-a field highly developed in the former Soviet Union and actively investigated in the West. The topics are concentrated around the three main branches of un certain dynamics which are the theory of Differential Games, the set membership approach to Evolution, Estimation and Control and the the ory of Robust Stabilization. The application of these techniques to non linear systems as well as the global optimization of the latter are also among the issues treated in this volume.
Download or read book 25th International Symposium on Measurements and Control in Robotics written by Ioan Doroftei and published by Springer Nature. This book was released on with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Optimal Control written by Roland Bulirsch and published by Birkhäuser. This book was released on 2012-12-06 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resources should be used sparingly both from a point of view of economy and eco logy. Thus in controlling industrial, economical and social processes, optimization is the tool of choice. In this area of applied numerical analysis, the INTERNATIONAL FEDERATION OF AUTOMATIC CONTROL (IFAC) acts as a link between research groups in universities, national research laboratories and industry. For this pur pose, the technical committee Mathematics of Control of IFAC organizes biennial conferences with the objective of bringing together experts to exchange ideas, ex periences and future developments in control applications of optimization. There should be a genuine feedback loop between mathematicians, computer scientists, engineers and software developers. This loop should include the design, application and implementation of algorithms. The contributions of industrial practitioners are especially important. These proceedings contain selected papers from a workshop on CONTROL Ap PLICATIONS OF OPTIMIZATION, which took place at the Fachhochschule Miinchen in September 1992. The workshop was the ninth in a series of very successful bien nial meetings, starting with the Joint Automatic Control Conference in Denver in 1978 and followed by conferences in London, Oberpfaffenhofen, San Francisco, Ca pri, Tbilisi and Paris. The workshop was attended by ninety researchers from four continents. This volume represents the state of the art in the field, with emphasis on progress made since the publication of the proceedings of the Capri meeting, edited by G. di Pillo under the title 'Control Applications of Optimization and Nonlinear Programming'.
Download or read book Nonlinear Synthesis written by C.I. Byrnes and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its broadest sense, nonlinear synthesis involves in fact the synthesis of sometimes so phisticated or complex control strategies with the aim of prescribing, or at least influencing, the evolution of complex nonlinear systems. Nonlinear synthesis requires the development of methodologies for modeling complex systems, for the analysis of nonlinear models, and for the systematic design of control schemes or feedback laws which can achieve a wide variety of prescribed objectives. The modeling, analysis and control of complex systems in the face of uncertainty form on of the major components of the current research program in the Department of Systems and Decision Sciences (SDS) at the International Institute for Applied Systems Analysis (IIASA). In June 1989, a IIASA workshop on Nonlinear Synthesis, sponsored by SDS, was held in Sopron, Hungary. We are proud to present this volume as the proceedings of this workshop, a workshop attened by prominent researchers in nonlinear systems from both the East and the West. Since the promotion and encouragement of scientific cooperation between researchers in the East and in the West is one of the goals at IIASA, we feel the Sopron Conference on Nonlinear Synthesis was very successful. Moreover, we were especially pleased by the impressive new advances presented at the workshop which, in this volume, are now part of the conference record.
Download or read book Control of Uncertain Systems written by Hinrichsen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Invoking the machinery of Control Theory to control a real-world plant means, on the basis of available a priori knowledge of the plant, design ing/selecting a feasible controller accomplishing the control objective. A priori knowledge about the plant is normally represented as a mathemat ical model, given by physical laws or measurement data. Such a model is inevitably uncertain, due to measurement errors, simplified models of natural laws, neglected dynamics, and the desire to get a model tractable for further computations. Control of Uncertain Systems is therefore an im portant issue, both practically and philosophically. Basically, two different approaches exist: Adaptive Control and Robust Control. On four beautiful summer days in June 1989, researchers from 12 coun tries gathered together in Bremen, West Germany, for a workshop devoted to these issues. 49 talks, invited and contributed, were presented. The present work collects 18 of these talks. (Program and original abstracts from the workshop are available as Report 209, Institute for Dynamical System.) The papers represent a broad scope of current trends in robust and adaptive control. Topics covered include: New directions in adaptive control, stability analysis of uncertain systems, robust and adaptive stabi lization, numerical methods, and topological aspects of robust control. The papers were carefully refereed and we would like to thank the referees for their efforts, which have resulted in substantial improvements.
Download or read book Modeling Estimation and Control of Systems with Uncertainty written by G.B. DiMasi and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers that have been presented at the Conference on Modeling and Control of Uncertain Systems held in Sopron, Hungary on September 3-7, 1990, organised within the framework of the activities of the System and Decision Sciences Program of IIASA - the International Institute for Applied Systems Analysis. The importance of the subject has drawn the attention of researchers all over the world since several years. In fact, in most actual applications the knowledge about the system under investigation presents aspects of uncertainty due to measurement errors or poor understanding of the rele vant underlying mechanisms. For this reason models that take into account these intrinsic uncertainties have been used and techniques for the analysis of their behavior as well as for their estimation and control have been devel oped. The main ways to deal with uncertainty consist in its description by stochastic processes or in terms of set-valued dynamics and this volume col lects relevant contributions in both directions. However, in order to avoid undesirable distinctions between these approaches, but on the contrary to stress the unity of ideas, we decided to organize the papers according to the alphabetical order of their authors. We should like to take this opportunity to thank IIASA for supporting the Conference and the Hungarian National Member Organization for the kind hospitality in Sopron. Finally we would like to express our gratitude to Ms. Donna Huchthausen for her valuable secretarial assistance. Vienna, February 20, 1991 GIOVANNI B.
Download or read book Discrete Event Systems Modeling and Control written by S. Balemi and published by Springer Science & Business Media. This book was released on 1993-01-01 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research of discrete event systems is strongly motivated by applications in flex ible manufacturing, in traffic control and in concurrent and real-time software verification and design, just to mention a few important areas. Discrete event system theory is a promising and dynamically developing area of both control theory and computer science. Discrete event systems are systems with non-numerically-valued states, inputs, and outputs. The approaches to the modelling and control of these systems can be roughly divided into two groups. The first group is concerned with the automatic design of controllers from formal specifications of logical requirements. This re search owes much to the pioneering work of P.J. Ramadge and W.M. Wonham at the beginning of the eighties. The second group deals with the analysis and op timization of system throughput, waiting time, and other performance measures for discrete event systems. The present book contains selected papers presented at the Joint Workshop on Discrete Event Systems (WODES'92) held in Prague, Czechoslovakia, on Au gust 26-28, 1992 and organized by the Institute of Information Theory and Au tomation of the Czechoslovak Academy of Sciences, Prague, Czechoslovakia, by the Automatic Control Laboratory of the Swiss Federal Institute of Technology (ETH) , Zurich, Switzerland, and by the Department of Computing Science of the University of Groningen, Groningen, the Netherlands.
Download or read book Realization and Modelling in System Theory written by A.C. Ran and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the first of the three volume publication containing the proceedings of the 1989 International Symposium on the Mathematical Theory of Networks and Systems (MTNS-89), which was held in Amsterdam, The Netherlands, June 19-23, 1989. The International Symposia MTNS focus attention on problems from system and control theory, circuit theory and signal processing, which, in general, require application of sophisticated mathematical tools, such as from function and operator theory, linear algebra and matrix theory, differential and algebraic geometry. The interaction between advanced mathematical methods and practical engineering problems of circuits, systems and control, which is typical for MTNS, turns out to be most effective and is, as these proceedings show, a continuing source of exciting advances. The first volume contains invited papers and a large selection of other symposium presentations on the general theory of deterministic and stochastic systems with an emphasis on realization and modelling. A wide variety of recent results on approximate realization and system identification, stochastic dynamical systems, discrete event systems,- o systems, singular systems and nonstandard models IS presented. Preface vi Also a few papers on applications in hydrology and hydraulics are included. The titles of the two other volumes are: Robust Control of Linear Sys tems and Nonlinear Control (volume 2) and Signal Processing. Scatter ing and Operator Theory. and Numerical Methods (volume 3). The Editors are most grateful to the about 300 reviewers for their help in the refereeing process. The Editors thank Ms. G. Bijleveld and Ms.
Download or read book Computation and Control II written by Kenneth L. Bowers and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers delivered by the partici pants at the second Conference on Computation and Control held at Mon tana State University in Bozeman, Montana from August 1-7, 1990. The conference, as well as this proceedings, attests to the vitality and cohesion between the control theorist and the numerical analyst that was adver tised by the first Conference on Computation and Control in 1988. The proceedings of that initial conference was published by Birkhiiuser Boston as the first volume of this same series entitled Computation and Control, Proceedings of the Bozeman Conference, Bozeman, Montana, 1988. Control theory and numerical analysis are both, by their very nature, interdisciplinary subjects as evidenced by their interaction with other fields of mathematics and engineering. While it is clear that new control or es timation algorithms and new feedback design methodologies will need to be implemented computationally, it is likewise clear that new problems in computational mathematics arise when implementing a new generation of control algorithms. For these reasons, computational mathematics is mov ing to the forefront in recent developments in modern control theory and conversely control theory and its applications continue to be a fertile area for computationalists. This volume contains a representative cross section of the interdisciplinary blend of analytic and numerical techniques that of ten occur between advanced control design and practical numerical solution of lumped and distributed parameter systems.
Download or read book Computation and Control III written by Kenneth L. Bowers and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third Conference on Computation and Control was held at Mon tana State University in Bozeman, Montana from August 5-11, 1992 and this proceedings represents the evolution that the conference has taken since its 1988 and 1990 predecessors. The first conference and proceedings (Volume 1 in PSCT) nurtured a dialogue between researchers in control theory and the area of numerical computation. This cross-fertilization was continued with the 1990 conference and proceedings (Volume 11 in PSCT) while forecasting the theme for this conference. The present volume contains a collection of papers addressing issues ranging from noise abatement via smart material technology, robotic vi sion, and parameter identification to feedback design challenges in fluid control and other areas of topical interest. The area of feedback design in fluid control spawns computational challenges in the form of Burgers' equation which is addressed both with standard numerical methods as well as new computational procedures. Applications which involve inverse prob lems include material parameter estimation and sampling in observability. Whether motivated by the plant or arising as the distributed system in the design of a feedback compensator for problems in nonlinear control, the theme of this conference placed an emphasis on the use of partial dif ferential equations in control theory. Through challenges initiated via the control problem or the subsequent computational problem, the joint efforts of experts from the respective disciplines enhance the development of both.
Download or read book Essays on Control written by H.L. Trentelman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the text of the plenary lectures and the mini-courses of the European Control Conference (ECC'93) held in Groningen, the Netherlands, June 2S-July 1, 1993. However, the book is not your usu al conference proceedings. Instead, the authors took this occasion to take a broad overview of the field of control and discuss its development both from a theoretical as well as from an engineering perpective. The first essay is by the key-note speaker ofthe conference, A.G.J. Mac Farlane. It consists of a non-technical discussion of information processing and knowledge acquisition as the key features of control engineering tech nology. The next six articles are accounts of the plenary addresses. The contribution by R.W. Brockett concerns a mathematical framework for modelling motion control, a central question in robotics and vision. In the paper by M. Morari the engineering and the economic relevance of chemical process control are considered, in particular statistical quality control and the control of systems with constraints. The article by A.C.P.M. Backx is written from an industrial perspec tive. The author is director of an engineering consulting firm involved in the design of industrial control equipment. Specifically, the possibility of obtaining high performance and reliable controllers by modelling, identifi cation, and optimizing industrial processes is discussed.
