Download or read book Desulfurization of Hot Coal Gas written by Aysel T. Atimtay and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic and environmental requirements for advanced power generating systems demand the removal of corrosive and other sulfurous compounds from hot coal gas. After a brief account of the world energy resources and an overview of clean coal technologies, a review of regenerable metal oxide sorbents for cleaning the hot gas is provided. Zinc oxide, copper oxide, calcium oxide, manganese oxide based as well as supported and mixed metal oxide sorbents are treated. Performance analysis of these sorbents, effects of various parameters on the desulfurization efficiency, kinetics of sulfidation and regeneration reactions, sulfiding and regeneration mechanisms are discussed. Two chapters present recent results in the direct production of elemental sulfur from regeneration or SO2-rich gases.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-12 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy 2000 written by Naomi Balaban and published by CRC Press. This book was released on 2000-07-20 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy 2000, proceedings from the 8th in an international series of global energy forums, is now available in book format. These papers provide a broad-based perspective on not only technical energy developments, but a detailed examination into other aspects such as economic and policy assessments, global energy issues, energy efficiency and conservation, as well as architecture and international law. Also presented are individual and collected views on renewables, oil and gas, coal and nuclear. ENERGEX '2000, the 8th in an international series of global energy forums, was held in Las Vegas, July 23-28, 2000. The first in the series was held in Regina, Saskatchewan, Canada in cooperation, coordination and communication with technical societies, federal and provincial governments and industry. The majority of papers presented at the 8th global energy forum are contained in these proceedings and represent over 200 papers from 45 countries out of a total of over 400 accepted abstracts. These papers will provide the reader with a broad based perspective on not only technical energy developments but, as consistent with the International Energy Foundation's objectives, a detailed examination into other aspects such as economic and policy assessments, global energy issues such as global climatic change, energy efficiency and conservation, architecture and international law. ENERGEX '2000 also provided the opportunity for researchers internationally to present their individual and collected views related to the diverse sources of energy available to mankind. These sources include renewables, oil and gas, coal, and nuclear. From ENERGEX 2000 has resulted this new book! Since the inception of the ENERGEX series in 1982, an open door policy has been established so that any researcher from either the developed or the emerging nations will have an equal opportunity to present their individual or collected technical, economic or human dimensional assessments and analyses on an equal footing. Through this participation, researchers worldwide are provided with a wider range of opportunity to expand our horizons with respect to the continued use of fossil energies and nuclear energy combined with energy conservation and efficiency. This opens the door of opportunity in the 21st century with respect to the rapid developments and utilization of renewable energies and fuel cells. Integrated within this global energy forum were inputs from academia, industry and government on specific issues related to carbon sequestration, fuel cells, fossil fuels, hydrogen and the role of the present day energy standards of oil and gas, coal and nuclear energies In expanding the global energy picture, the Foundation developed the conference with the theme "Energy-International Cooperation, Coordination and Communication: The Beginning of a New Millennium." Consistent with this theme we are pleased that ENERGEX '2000 developed the program in concert with the Nevada Test Site Development Corporation (NTS).

Download or read book Directory of Published Proceedings written by and published by . This book was released on 1997 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Current Abstracts written by and published by . This book was released on 1994-11 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 1995-06-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) was given a mandate in the 1992 Energy Policy Act (EPACT) to pursue strategies in coal technology that promote a more competitive economy, a cleaner environment, and increased energy security. Coal evaluates DOE's performance and recommends priorities in updating its coal program and responding to EPACT. This volume provides a picture of likely future coal use and associated technology requirements through the year 2040. Based on near-, mid-, and long-term scenarios, the committee presents a framework for DOE to use in identifying R&D strategies and in making detailed assessments of specific programs. Coal offers an overview of coal-related programs and recent budget trends and explores principal issues in future U.S. and foreign coal use. The volume evaluates DOE Fossil Energy R&D programs in such key areas as electric power generation and conversion of coal to clean fuels. Coal will be important to energy policymakers, executives in the power industry and related trade associations, environmental organizations, and researchers.

Download or read book Impact of Mineral Impurities in Solid Fuel Combustion written by R. Gupta and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the Engineering Foundation Conference on mineral matter in fuels held on November 2-7, 1997 in Kona, Hawaii. The conference is one of a continuing series that was initiated by the CEGB Mar- wood Engineering Laboratories in 1963. The conference was to be eventually organised by the Engineering Foundation as the need for multi-disciplinary work related to c- trolling ash effects in combustors became apparent. The conference covers both the science and the applications. The papers also present case histories, particularly for current fuel technologies, developments in advanced technologies for power generation and mathematical modelling of these processes. Developments since 1963 have been slow, but steady, due to the complexity of the chemical and physical processes involved. However, the research presented here displays great improvement in our understanding of the mechanisms by which mineral matter will influence fuel use. Steve Benson from EERC presented a review and current status of issues related to ash deposition in coal combustion and gasification. The application of new analytical tools, which have been detailed in the previous conferences, is presented. These include CCSEM, as well as new techniques for char- terising sintering of ash, such as TMA, image analysis, X-ray diffraction crystallography and thermal analysis. The new analytical techniques were extended to encompass widely differing fuels such as biomass. Ole H Larsen from ELSAM Denmark presented a review of these advanced techniques.

Download or read book Optimum Choice of Energy System Configuration and Storages for a Proper Match between Energy Conversion and Demands written by Andrea Lazzaretto and published by MDPI. This book was released on 2020-01-31 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue addresses the general problem of a proper match between the demands of energy users and the units for energy conversion and storage, by means of proper design and operation of the overall energy system configuration. The focus is either on systems including single plants or groups of plants, connected or not to one or more energy distribution networks. In both cases, the optimum design and operation involve decisions about thermodynamic processes, about the type, number, design parameters of components/plants, and storage capacities, and about mutual interconnections and the interconnections with the distribution grids. The problem is absolutely general, encompassing design and operation of energy systems for single houses, groups of houses, industries, industrial districts, municipal areas, regions and countries. The presented papers show that similar approaches can be used in different applications, although a general standard has not been achieved yet.

Download or read book Modular Systems for Energy and Fuel Recovery and Conversion written by Yatish T. Shah and published by CRC Press. This book was released on 2019-06-28 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modular Systems for Energy and Fuel Recovery and Conversion surveys the benefits of the modular approach in the front end of the energy industry. The book also outlines strategies for managing modular approaches for fossil, renewable, and nuclear energy resource recovery and conversion with the help of successful industrial examples. The book points out that while the modular approach is most applicable for distributed and small-scale energy systems, it is also often used for parts of large-scale centralized systems. With the help of successful industrial examples of modular approaches for energy and fuel recovery and conversion, the book points out the need for more balance between large-scale centralized systems and small-scale distributed systems to serve the energy needs of rural and isolated communities. Coal, oil, natural gas, hydrogen, biomass, waste, nuclear, geothermal solar, wind, and hydro energy are examined, showing that modular operations are very successfully used in all these components of the energy industry. Aimed at academic researchers and industry professionals, this book provides successful examples and analysis of the modular operation for energy and fuel recovery and conversion. It is also a reference for those who are engaged in the development of modular systems for energy and fuel recovery and conversion.

Download or read book Advanced Energy Systems written by Nik Khartchenko and published by CRC Press. This book was released on 1997-11-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text deals with advanced energy systems that are sensitive to the environment, such as combined-cycle power plants. The text analyzes major advanced power generation technologies, and it gives an outlook to the future of power engineering. Among the features of this book are over 50 solved problems, examples included at the end of each chapter, a state-of-the-art analysis of advanced energy and emerging technologies, and full figures, appendices, and references.

Download or read book Uncertainty Modeling and Analysis in Civil Engineering written by Bilal M. Ayyub and published by CRC Press. This book was released on 1997-12-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the expansion of new technologies, materials, and the design of complex systems, the expectations of society upon engineers are becoming larger than ever. Engineers make critical decisions with potentially high adverse consequences. The current political, societal, and financial climate requires engineers to formally consider the factors of uncertainty (e.g., floods, earthquakes, winds, environmental risks) in their decisions at all levels. Uncertainty Modeling and Analysis in Civil Engineering provides a thorough report on the immediate state of uncertainty modeling and analytical methods for civil engineering systems, presenting a toolbox for solving problems in real-world situations. Topics include Neural networks Genetic algorithms Numerical modeling Fuzzy sets and operations Reliability and risk analysis Systems control Uncertainty in probability estimates This compendium is a considerable reference for civil engineers as well as for engineers in other disciplines, computer scientists, general scientists, and students.

Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Download or read book Electrical Power Systems Technology written by Dale R. Patrick and published by CRC Press. This book was released on 2022-06-01 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Power Systems Technology, Fourth Edition covers a wide range of technologies and systems used in the generation, distribution, control, conversion, and measurement of electrical power. This reference book provides a foundational overview presented in a basic, easy-to-understand manner. The content is organized in a logical pedagogical style using five basic power system components – Measurement, Generation, Distribution, Control, and Conversion. Each of these basic systems is broken down into sub-systems, equipment, and components that are explored in greater detail in each of the 18 chapters. Simplified mathematical concepts are described with practical applications to assist in fundamental understanding. Abundant illustrations (almost one per page) are used to add visual information to supplement technical knowledge development. The fourth edition has been edited to provide improved information and clarity, including many new illustrations. An additional chapter – Chapter 18 – Evolving Power System Technologies and Considerations – has been added to describe issues related to power system operation.

Download or read book The CRC Handbook of Mechanical Engineering Second Edition written by and published by CRC Press. This book was released on 1998-03-24 with total page 2642 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 20 years, the field of mechanical engineering has undergone enormous changes. These changes have been driven by many factors, including: the development of computer technology worldwide competition in industry improvements in the flow of information satellite communication real time monitoring increased energy efficiency robotics automatic control increased sensitivity to environmental impacts of human activities advances in design and manufacturing methods These developments have put more stress on mechanical engineering education, making it increasingly difficult to cover all the topics that a professional engineer will need in his or her career. As a result of these developments, there has been a growing need for a handbook that can serve the professional community by providing relevant background and current information in the field of mechanical engineering. The CRC Handbook of Mechanical Engineering serves the needs of the professional engineer as a resource of information into the next century.

Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Process Steam Systems A Practical Guide for Operators Maintainers Designers and Educators written by Carey Merritt and published by John Wiley & Sons. This book was released on 2022-11-01 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and accessible handbook for process steam systems The revised second edition of Process Steam Systems: A Practical Guide for Operators, Maintainers, Designers, and Educators delivers a practical guide to ensuring steam systems are properly and efficiently designed, operated, and maintained. The book provides comprehensive information designed to improve process steam system knowledge, reliability, and integration into current manufacturing processes. The most up-to-date version of this volume includes brand-new coverage of current codes, sustainability measures, and updated applications. Heat transfer theory and thermodynamics are tied into practical applications with new practice problems ideal for both professionals seeking to improve their skills and engineers-in training. Readers will also find: Thorough design criteria for process steam systems, complete with detailed illustrations for piping and controls An entirely new chapter on the history of steam systems, including the evolution of the ASME code and boiler accidents Revised coverage of current NFPA, ASME, CSD-1, FM, and building codes, as well as new insurance requirements relevant to practitioners in the industry Expansive design guidance for steam system efficiency upgrades Perfect for operations and maintenance staff at manufacturing, healthcare, and commercial laundries, Process Steam Systems: A Practical Guide for Operators, Maintainers, Designers, and Educators will also earn a place in the libraries of consulting engineers and engineering students with an interest in process manufacturing.