Download or read book Proceedings of the World Conference on Earthquake Engineering written by and published by . This book was released on 1992 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each of the volumes for the 1984 conference deals with one or more topics related to earthquake engineering.
Download or read book Proceedings of the 8th European Conference on Earthquake Engineering written by and published by . This book was released on 1986 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behavior and analysis of reinforced concrete structures under alternate actions inducing inelastic response written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1994-05-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Response of Structures Under Extreme Loading written by Venkatesh K.R. Kodur and published by DEStech Publications, Inc. This book was released on 2015-07-01 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: Original research on performance of materials under a wide variety of blasts, impacts, severe loading and fireCritical information for protecting buildings and civil infrastructure against human attack, deterioration and natural disastersTest and design data for new types of concrete, steel and FRP materials This technical book is devoted to the empirical and theoretical analysis of how structures and the materials constituting them perform under the extreme conditions of explosions, fire, and impact. Each of the 119 fully refereed presentations is published here for the first time and was selected because of its original contribution to the science and engineering of how materials, bridges, buildings, tunnels and their components, such as beams and pre-stressed parts, respond to potentially destructive forces. Emphasis is placed on translating empirical data to design recommendations for strengthening structures, including strategies for fire and earthquake protection as well as blast mitigation. Technical details are provided on the development and behavior of new resistant materials, including reinforcements, especially for concrete, steel and their composites.
Download or read book Proceedings of the Tenth World Conference on Earthquake Engineering written by and published by CRC Press. This book was released on 1992 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Buildings in Seismic Regions written by George G. Penelis and published by CRC Press. This book was released on 2014-03-24 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bearing in mind that reinforced concrete is a key component in a majority of built environment structures, Concrete Buildings in Seismic Regions combines the scientific knowledge of earthquake engineering with a focus on the design of reinforced concrete buildings in seismic regions. This book addresses practical design issues, providing an integrated, comprehensible, and clear presentation that is suitable for design practice. It combines current approaches to seismic analysis and design, with a particular focus on reinforced concrete structures, and includes: an overview of structural dynamics analysis and design of new R/C buildings in seismic regions post-earthquake damage evaluation, pre earthquake assessment of buildings and retrofitting procedures seismic risk management of R/C buildings within urban nuclei extended numerical example applications Concrete Buildings in Seismic Regions determines guidelines for the proper structural system for many types of buildings, explores recent developments, and covers the last two decades of analysis, design, and earthquake engineering. Divided into three parts, the book specifically addresses seismic demand issues and the basic issues of structural dynamics, considers the "capacity" of structural systems to withstand seismic effects in terms of strength and deformation, and highlights existing R/C buildings under seismic action. All of the book material has been adjusted to fit a modern seismic code and offers in-depth knowledge of the background upon which the code rules are based. It complies with the last edition of European Codes of Practice for R/C buildings in seismic regions, and includes references to the American Standards in effect for seismic design.
Download or read book Ocean Structures written by Srinivasan Chandrasekaran and published by CRC Press. This book was released on 2017-01-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the concepts of material selection and analysis, choice of structural form, construction methods, environmental loads, health monitoring, non-destructive testing, and repair methodologies and rehabilitation of ocean structures. It examines various types of ocean and offshore structures, including drilling platforms, processing platforms and vessels, towers, sea walls and surge barriers, and more. It also explores the use of MEMS in offshore structures, with regard to military and oil exploration applications. Full-color figures as well as numerous solved problems and examples are included to help readers understand the applied concepts.
Download or read book Current Perspectives and New Directions in Mechanics Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-02 with total page 4438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in the e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in the printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.
Download or read book Seismic Design of Steel Structures written by Victor Gioncu and published by CRC Press. This book was released on 2013-11-20 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing real world applications for different structural types and seismic characteristics, Seismic Design of Steel Structures combines knowledge of seismic behavior of steel structures with the principles of earthquake engineering. This book focuses on seismic design, and concentrates specifically on seismic-resistant steel structures. Drawing o
Download or read book Non Destructive Testing of Structures written by Magdalena Rucka and published by MDPI. This book was released on 2021-02-16 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue “Non-Destructive Testing of Structures” has been proposed to present the recent developments in the field of the diagnostics of structural materials and components in civil and mechanical engineering. The papers highlighted in this editorial concern various aspects of non-invasive diagnostics, including such topics as the condition assessments of civil and mechanical structures and the connections of structural elements, the inspection of cultural heritage monuments, the testing of structural materials, structural health monitoring systems, the integration of non-destructive testing methods, advanced signal processing for the non-destructive testing of structures (NDT), damage detection and damage imaging, as well as modeling and numerical analyses for supporting structural health monitoring (SHM) systems.
Download or read book Proceedings of the 10th International Conference on Behaviour of Steel Structures in Seismic Areas written by Federico M. Mazzolani and published by Springer Nature. This book was released on 2022-05-07 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of seismic design and performance of steel structures, as presented by leading international researchers and engineers at the 10th International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA), held in Timisoara, Romania, on 25-27 May 2022. It covers a diverse range of topics such as behaviour of structural members and connections, performance of structural systems, mixed and composite structures, energy dissipation systems, self-centring and low-damage systems, assessment and retrofitting, codes and standards, light-gauge systems. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Proceedings of the 2024 8th International Conference on Civil Architecture and Structural Engineering ICCASE 2024 written by Bingxiang Yuan and published by Springer Nature. This book was released on 2024 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zusammenfassung: This is an open access book. 2024 8th International Conference on Civil Architecture and Structural Engineering (ICCASE 2024) will be held in Guangzhou during April 19-21, 2024. The conference mainly discussed research areas such as "Engineering Structures", "Smart Buildings", "Building Materials", "Structural Seismic Resistance", "Monitoring and Testing", "Geotechnical Engineering", and "Underground Space Engineering". Intended to provide an exchange platform for experts, scholars, engineering technicians, and technical research and development personnel in related fields. By discussing scientific research achievements and cutting-edge technologies, understanding academic development trends, broadening research ideas, strengthening academic research and exploration, and promoting the industrialization of academic achievements
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 1106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.
Download or read book Recent Advances in Materials Mechanics and Structures written by Suman Saha and published by Springer Nature. This book was released on 2022-10-04 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select proceedings of the second International Conference on Materials, Mechanics and Structures (ICMMS 2022). The book highlights the latest developments, innovations and applications in the diverse range of areas of civil engineering. It covers the findings of recent research works across the globe on various topics such as civil engineering materials; concrete and masonry structures; composite structures; structural mechanics; fluid-structure interaction; repair, rehabilitation and retrofitting of the structures; new technologies in structural design and construction; bridge engineering, structural dynamics, earthquake engineering, etc. This book will be useful for beginners, researchers and professionals working in the different areas of civil engineering.
Download or read book Advances in Indian Earthquake Engineering and Seismology written by M. L. Sharma and published by Springer. This book was released on 2018-06-22 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is an up-to-date guide for students, policy makers and engineers on earthquake engineering, including methods and technologies for seismic hazard detection and mitigation. The book was written in honour of the late Professor Jai Krishna, who was a pioneer in teaching and research in the field of earthquake engineering in India during his decades-long work at the University of Roorkee (now the Indian Institute of Technology Roorkee). The book comprehensively covers the historical development of earthquake engineering in India, and uses this background knowledge to address the need for current advances in earthquake engineering, especially in developing countries. After discussing the history and growth of earthquake engineering in India from the past 50 years, the book addresses the present status of earthquake engineering in regards to the seismic resistant designs of bridges, buildings, railways, and other infrastructures. Specific topics include response spectrum superposition methods, design philosophy, system identification approaches, retaining walls, and shallow foundations. Readers will learn about developments in earthquake engineering over the past 50 years, and how new methods and technologies can be applied towards seismic risk and hazard identification and mitigation.
Download or read book Earthquake Risk Reduction written by David J. Dowrick and published by John Wiley & Sons. This book was released on 2003-09-12 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing theory and field experience, this book covers all the main subject areas in earthquake risk reduction, ranging from geology, seismology, structural and soil dynamics to hazard and risk assessment, risk management and planning, engineering and the architectural design of new structures and equipment. Earthquake Risk Reduction outlines individual national weaknesses that contribute to earthquake risk to people and property; calculates the seismic response of soils and structures, using the structural continuum 'Subsoil - Substructure - Superstructure - Non-structure'; evaluates the effectiveness of given designs and construction procedures for reducing casualties and financial losses; provides guidance on the key issue of choice of structural form; presents earthquake resistant designs methods for the four main structural materials - steel, concrete, reinforced masonry and timber - as well as for services equipment, plant and non-structural architectural components; contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment. Compiled from the author's extensive professional experience in earthquake engineering, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake risk reduction. This book will prove an invaluable reference and guiding tool to practicing civil and structural engineers and architects, researchers and postgraduate students in seismology, local governments and risk management officials.
Download or read book Structures and Infrastructure Systems written by Dan M. Frangopol and published by Routledge. This book was released on 2019-12-18 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our knowledge to model, design, analyse, maintain, manage and predict the life-cycle performance of infrastructure systems is continually growing. However, the complexity of these systems continues to increase and an integrated approach is necessary to understand the effect of technological, environmental, economic, social, and political interactions on the life-cycle performance of engineering infrastructure. In order to accomplish this, methods have to be developed to systematically analyse structure and infrastructure systems, and models have to be formulated for evaluating and comparing the risks and benefits associated with various alternatives. Civil engineers must maximize the life-cycle benefits of these systems to serve the needs of our society by selecting the best balance of the safety, economy, resilience and sustainability requirements despite imperfect information and knowledge. Within the context of this book, the necessary concepts are introduced and illustrated with applications to civil and marine structures. This book is intended for an audience of researchers and practitioners world‐wide with a background in civil and marine engineering, as well as people working in infrastructure maintenance, management, cost and optimization analysis. The chapters originally published as articles in Structure and Infrastructure Engineering.