Download or read book Semi Solid Processing of Alloys and Composites written by Shahrooz Nafisi and published by MDPI. This book was released on 2020-06-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-solid metal (SSM) processing, as a viable alternative manufacturing route to those of conventional casting and forging, has not yet been fully exploited despite nearly half a century since its introduction to the metal industry. The slow pace of adopting SSM routes may be due to various reasons, including capital costs, profit margins, and, most importantly, the lack of detailed analysis of various SSM processes in open literature to confidently establish their advantages over more conventional routes. Therefore, the SSM community must disseminate their findings more effectively to generate increased confidence in SSM processes in the eyes of our industrial leaders. As such, we have embarked on the task to invite the leaders in SSM research to share their findings in a Special Issue dedicated to semi-solid processing of metals and composites. SSM processing takes advantage of both forming and shaping characteristics usually employed for liquid and solid materials. In the absence of shear forces, the semi-solid metal has similar characteristics to solids, i.e., easily transferred and shaped; by applying a defined force, the viscosity is reduced and the material flows like a liquid. These unique dual characteristics have made SSM routes attractive alternatives to conventional casting on an industrial scale. With the intention of taking full advantage of SSM characteristics, it is crucial to understand SSM processing, including topics such as solidification and structural evolution, flow behavior through modelling and rheology, new processes and process control, alloy development, and properties in general. This Special Issue focuses on the recent research and findings in the field with the aim of filling the gap between industry and academia, and to shed light on some of the fundamentals of science and technology of semi-solid processing.

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Semi Solid Processing of Alloys and Composites written by C. G. Kang and published by . This book was released on 2006 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is dedicated to the science and technology of the semi-solid processing of metals.

Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Thixoforming written by Gerhard Hirt and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a sound technological overview, while also including the fundamental aspects, this book provides the knowledge needed to master the highly challenging process characteristics for successful application in industrial production. It summarizes the first-hand experience gained from twelve years of collaborative research covering materials science, rheology, casting and forming, control and surface technology as well as the modeling of flow behavior, tool engineering and systems engineering, and thus treats all the vital aspects of this field. For materials scientists, physicists, engineers, and those working in the metal processing industry.

Download or read book Metal Matrix Composites written by Antonio Contreras Cuevas and published by Springer. This book was released on 2018-10-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.

Download or read book Solidification Phenomena in Metal Matrix Nanocomposites written by Michael Peter De Cicco and published by . This book was released on 2009 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Materials and Advanced Materials written by Zheng Yi Jiang and published by Trans Tech Publications Ltd. This book was released on 2010-10-27 with total page 1967 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China

Download or read book Simulation of Aluminum Shape Casting Processing written by Qigui Wang and published by Wiley-TMS. This book was released on 2006-11 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the latest developments and applications of modeling and simulation techniques in aluminum shape castings, and the need for improvement of these computational techniques. Specifically, topics include design of both the cast aluminum alloy as well as aluminum casting and gating system; modeling, simulation and optimization of both the casting process and heat treatment; modeling and simulation of both casting defect and microstructure; prediction of mechanical performance and influence of subsequent processing on final performance. Developers and users of computational techniques applied to aluminum shape castings as well as end users of castings will find this book extremely helpful.

Download or read book Materials World written by and published by . This book was released on 2003 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Semi solid Processing of Alloys written by David H. Kirkwood and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semisolid metallurgy (SSM) is now some 37-years-old in terms of time from its conception and ?rst reduction to practice in the laboratory. In the intervening years, there has been a steadily growing body of research on the subject and the beginning of signi?cant industrial applications. The overall ?eld of SSM comprises today a large number of speci?c process routes, almost all of which fall in the category of either “Rheocasting” or Thi- casting.” The former begins with liquid metal and involves agitation during partial solidi?cation followed by forming. The latter begins with solid metal of suitable structure and involves heating to the desired fraction solid and forming. Research over the past 37 years, and particularly over the last decade, has provided a detailed picture of process fundamentals and led to a wide range of speci?c SSM processes and process innovations. Industrial studies and actual p- duction experience are providing a growing picture of the process advantages and limitations. At this time, the conditions for eventual wide adoption of SSM appear favorable, both for nonferrous and ferrous alloys. It must, however, be recognized that major innovations, such as SSM become adopted only slowly by industries where capital costsarehigh,pro?tmarginsaremodest,andfailuretomeetcustomercommitments carries a high penalty.

Download or read book Metals and Related Substances in Drinking Water written by Prosun Bhattacharya and published by IWA Publishing. This book was released on 2011-11-25 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! Metals and Related Substances in Drinking Water comprises the proceedings of COST Action 637 - METEAU, held in Kristianstad, Sweden, October 13-15, 2010. This book collates the understanding of the various factors which control metals and related substances in drinking water with an aim to minimize environmental impacts. Metals and Related Substances in Drinking Water: Provides an overview of knowledge on metals and related substances in drinking water. Promotes good practice in controlling metals and related substances in drinking water. Helps to determining the environmental and socio-economic impacts of control measures through public participation Introduces the importance of mineral balance in drinking water especially when choosing treatment methods Shares practitioner experience. The proceedings of this international conference contain many state-of-the-art presentations by leading researchers from across the world. They are of interest to water sector practitioners, regulators, researchers and engineers.

Download or read book Model Based Engineering of Collaborative Embedded Systems written by Wolfgang Böhm and published by Springer Nature. This book was released on 2020-12-14 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years.

Download or read book Semi Solid Processing of Aluminum Alloys written by Shahrooz Nafisi and published by Springer. This book was released on 2016-09-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in great detail the semi-solid processing of aluminum alloys. The authors examine the fundamentals of semi-solid metal processing, provide guidelines for research, illustrate the tools that are employed, and explain the measured parameters for semi-solid processing characterization.

Download or read book Evolution of Sanitation and Wastewater Technologies through the Centuries written by Andreas N. Angelakis and published by IWA Publishing. This book was released on 2014-09-14 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the technological developments relevant to water supply and wastewater date back to more than to five thousand years ago. These developments were driven by the necessity to make efficient use of natural resources, to make civilizations more resistant to destructive natural elements, and to improve the standards of life, both at public and private level. Rapid technological progress in the 20th century created a disregard for past sanitation and wastewater and stormwater technologies that were considered to be far behind the present ones. A great deal of unresolved problems in the developing world related to the wastewater management principles, such as the decentralization of the processes, the durability of the water projects, the cost effectiveness, and sustainability issues, such as protection from floods and droughts were intensified to an unprecedented degree. New problems have arisen such as the contamination of surface and groundwater. Naturally, intensification of unresolved problems has led to the reconsideration of successful past achievements. This retrospective view, based on archaeological, historical, and technical evidence, has shown two things: the similarity of physicochemical and biological principles with the present ones and the advanced level of wastewater engineering and management practices. Evolution of Sanitation and Wastewater Technologies through the Centuries presents and discusses the major achievements in the scientific fields of sanitation and hygienic water use systems throughout the millennia, and compares the water technological developments in several civilizations. It provides valuable insights into ancient wastewater and stormwater management technologies with their apparent characteristics of durability, adaptability to the environment, and sustainability. These technologies are the underpinning of modern achievements in sanitary engineering and wastewater management practices. It is the best proof that “the past is the key for the future”. Evolution of Sanitation and Wastewater Technologies through the Centuries is a textbook for undergraduate and graduate courses of Water Resources, Civil Engineering, Hydraulics, Ancient History, Archaeology, Environmental Management and is also a valuable resource for all researchers in the these fields. Authors: Andreas N. Angelakis, Institute of Iraklion, Iraklion, Greece and Joan B. Rose, Michigan State University, East Lansing, MI, USA

Download or read book Human Systems Engineering and Design III written by Waldemar Karwowski and published by Springer Nature. This book was released on 2020-08-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on novel design and systems engineering approaches, including theories and best practices, for promoting a better integration of people and engineering systems. It covers a range of innovative topics related to: development of human-centered systems; interface design and human-computer interaction; usability and user experience; innovative materials in design and manufacturing; biomechanics and physical rehabilitation, as well as safety engineering and systems complexity. The book, which gathers selected papers presented at the 3rd International Conference on Human Systems Engineering and Design: Future Trends and Applications (IHSED 2020), held on September 22-24, 2020, at Juraj Dobrila University of Pula, in Pula, Croatia, provides researchers and practitioners with a snapshot of the state-of-the-art and current challenges in the field of human systems engineering and design.

Download or read book Cardiovascular Computing Methodologies and Clinical Applications written by Spyretta Golemati and published by Springer. This book was released on 2019-02-12 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the state-of-the-art in cardiovascular computing and highlights novel directions and challenges in this constantly evolving multidisciplinary field. The topics covered span a wide range of methods and clinical applications of cardiovascular computing, including advanced technologies for the acquisition and analysis of signals and images, cardiovascular informatics, and mathematical and computational modeling.