Download or read book Semi Solid Processing of Alloys and Composites written by Shahrooz Nafisi and published by MDPI. This book was released on 2020-06-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-solid metal (SSM) processing, as a viable alternative manufacturing route to those of conventional casting and forging, has not yet been fully exploited despite nearly half a century since its introduction to the metal industry. The slow pace of adopting SSM routes may be due to various reasons, including capital costs, profit margins, and, most importantly, the lack of detailed analysis of various SSM processes in open literature to confidently establish their advantages over more conventional routes. Therefore, the SSM community must disseminate their findings more effectively to generate increased confidence in SSM processes in the eyes of our industrial leaders. As such, we have embarked on the task to invite the leaders in SSM research to share their findings in a Special Issue dedicated to semi-solid processing of metals and composites. SSM processing takes advantage of both forming and shaping characteristics usually employed for liquid and solid materials. In the absence of shear forces, the semi-solid metal has similar characteristics to solids, i.e., easily transferred and shaped; by applying a defined force, the viscosity is reduced and the material flows like a liquid. These unique dual characteristics have made SSM routes attractive alternatives to conventional casting on an industrial scale. With the intention of taking full advantage of SSM characteristics, it is crucial to understand SSM processing, including topics such as solidification and structural evolution, flow behavior through modelling and rheology, new processes and process control, alloy development, and properties in general. This Special Issue focuses on the recent research and findings in the field with the aim of filling the gap between industry and academia, and to shed light on some of the fundamentals of science and technology of semi-solid processing.
Download or read book Semi Solid Processing of Alloys and Composites written by C. G. Kang and published by . This book was released on 2006 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is dedicated to the science and technology of the semi-solid processing of metals.
Download or read book Semi Solid of Alloys and Composites XV written by Qiang Zhu and published by Trans Tech Publications Ltd. This book was released on 2019-01-03 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: 15th International Conference on Semi-Solid Processing of Alloys and Composites (S2P) Selected, peer reviewed papers from the 15th International Conference on Semi-Solid of Alloys and Composites XV (S2P 2018), October 22-24, 2018, Shenzhen, China
Download or read book Thixoforming written by Gerhard Hirt and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a sound technological overview, while also including the fundamental aspects, this book provides the knowledge needed to master the highly challenging process characteristics for successful application in industrial production. It summarizes the first-hand experience gained from twelve years of collaborative research covering materials science, rheology, casting and forming, control and surface technology as well as the modeling of flow behavior, tool engineering and systems engineering, and thus treats all the vital aspects of this field. For materials scientists, physicists, engineers, and those working in the metal processing industry.
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Solidification Phenomena in Metal Matrix Nanocomposites written by Michael Peter De Cicco and published by . This book was released on 2009 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 10th ESAFORM Conference on Material Forming written by Elías Cueto and published by American Inst. of Physics. This book was released on 2007-05-10 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the 10th Annual ESAFORM Conference, which covers the multitude of disciplines related to material forming. This year's conference features for the first time an ECCOMAS Thematic conference devoted to new advanced numerical strategies in forming simulation, which has been traditionally one of the mini-symposia of the conference.
Download or read book Corrosion Resistance of Aluminum and Magnesium Alloys written by Edward Ghali and published by John Wiley & Sons. This book was released on 2010-04-26 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable information on corrosion fundamentals and applications of aluminum and magnesium Aluminum and magnesium alloys are receiving increased attention due to their light weight, abundance, and resistance to corrosion. In particular, when used in automobile manufacturing, these alloys promise reduced car weights, lower fuel consumption, and resulting environmental benefits. Meeting the need for a single source on this subject, Corrosion Resistance of Aluminum and Magnesium Alloys gives scientists, engineers, and students a one-stop reference for understanding both the corrosion fundamentals and applications relevant to these important light metals. Written by a world leader in the field, the text considers corrosion phenomena for the two metals in a systematic and parallel fashion. The coverage includes: The essentials of corrosion for aqueous, high temperature corrosion, and active-passive behavior of aluminum and magnesium alloys The performance and corrosion forms of aluminum alloys The performance and corrosion forms of magnesium alloys Corrosion prevention methods such as coatings for aluminum and magnesium Electrochemical methods of corrosion investigation and their application to aluminum and magnesium alloys Offering case studies and detailed references, Corrosion Resistance of Aluminum and Magnesium Alloys provides an essential, up-to-date resource for graduate-level study, as well as a working reference for professionals using aluminum, magnesium, and their alloys.
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2006 with total page 1884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semi Solid Processing of Alloys and Composites S2P written by Annalisa Pola and published by Trans Tech Publications Ltd. This book was released on 2023-09-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed extended articles based on abstracts presented at the 17th International Conference on Semi-Solid Processing of Alloys and Composites (S2P) Aggregated Book
Download or read book Materials World written by and published by . This book was released on 2003 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semi solid Processing of Alloys written by David H. Kirkwood and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semisolid metallurgy (SSM) is now some 37-years-old in terms of time from its conception and ?rst reduction to practice in the laboratory. In the intervening years, there has been a steadily growing body of research on the subject and the beginning of signi?cant industrial applications. The overall ?eld of SSM comprises today a large number of speci?c process routes, almost all of which fall in the category of either “Rheocasting” or Thi- casting.” The former begins with liquid metal and involves agitation during partial solidi?cation followed by forming. The latter begins with solid metal of suitable structure and involves heating to the desired fraction solid and forming. Research over the past 37 years, and particularly over the last decade, has provided a detailed picture of process fundamentals and led to a wide range of speci?c SSM processes and process innovations. Industrial studies and actual p- duction experience are providing a growing picture of the process advantages and limitations. At this time, the conditions for eventual wide adoption of SSM appear favorable, both for nonferrous and ferrous alloys. It must, however, be recognized that major innovations, such as SSM become adopted only slowly by industries where capital costsarehigh,pro?tmarginsaremodest,andfailuretomeetcustomercommitments carries a high penalty.
Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.
Download or read book Surgical Robotics written by Jacob Rosen and published by Springer Science & Business Media. This book was released on 2011-01-15 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surgical robotics is a rapidly evolving field. With roots in academic research, surgical robotic systems are now clinically used across a wide spectrum of surgical procedures. Surgical Robotics: Systems Applications and Visions provides a comprehensive view of the field both from the research and clinical perspectives. This volume takes a look at surgical robotics from four different perspectives, addressing vision, systems, engineering development and clinical applications of these technologies. The book also: -Discusses specific surgical applications of robotics that have already been deployed in operating rooms -Covers specific engineering breakthroughs that have occurred in surgical robotics -Details surgical robotic applications in specific disciplines of surgery including orthopedics, urology, cardiac surgery, neurosurgery, ophthalmology, pediatric surgery and general surgery Surgical Robotics: Systems Applications and Visions is an ideal volume for researchers and engineers working in biomedical engineering.
Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.
Download or read book Semi Solid Processing of Alloys and Composites XIV written by Ahmed Rassili and published by Trans Tech Publications Ltd. This book was released on 2016-09-30 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 14th International Conference on Semi Solid Processing of Alloys and Composites, October 23-27, 2016 Salt Lake City, Utah, USA
