Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.
Download or read book Treatise on Process Metallurgy Volume 2 Process Phenomena written by and published by Newnes. This book was released on 2013-11-22 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process metallurgy provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. Coverage is divided into three volumes, entitled Process Fundamentals, encompassing process fundamentals, extractive and refining processes, and metallurgical process phenomena; Processing Phenomena, encompassing ferrous processing; non-ferrous processing; and refractory, reactive and aqueous processing of metals; and Industrial Processes, encompassing process modeling and computational tools, energy optimization, environmental aspects and industrial design. The work distils 400+ years combined academic experience from the principal editor and multidisciplinary 14-member editorial advisory board, providing the 2,608-page work with a seal of quality. The volumes will function as the process counterpart to Robert Cahn and Peter Haasen's famous reference family, Physical Metallurgy (1996)--which excluded process metallurgy from consideration and which is currently undergoing a major revision under the editorship of David Laughlin and Kazuhiro Hono (publishing 2014). Nevertheless, process and extractive metallurgy are fields within their own right, and this work will be of interest to libraries supporting courses in the process area. - Synthesizes the most pertinent contemporary developments within process metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single complete solution, saving time for busy scientists - Helps metallurgists to predict changes and consequences and create or modify whatever process is deployed
Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-03-12 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume Three, Industrial Processes provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics
Download or read book Treatise on Process Metallurgy Volume 3 Industrial Processes written by and published by Newnes. This book was released on 2013-12-09 with total page 1810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process metallurgy provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. Coverage is divided into three volumes, entitled Process Fundamentals, encompassing process fundamentals, extractive and refining processes, and metallurgical process phenomena; Processing Phenomena, encompassing ferrous processing; non-ferrous processing; and refractory, reactive and aqueous processing of metals; and Industrial Processes, encompassing process modeling and computational tools, energy optimization, environmental aspects and industrial design. The work distils 400+ years combined academic experience from the principal editor and multidisciplinary 14-member editorial advisory board, providing the 2,608-page work with a seal of quality. The volumes will function as the process counterpart to Robert Cahn and Peter Haasen's famous reference family, Physical Metallurgy (1996)--which excluded process metallurgy from consideration and which is currently undergoing a major revision under the editorship of David Laughlin and Kazuhiro Hono (publishing 2014). Nevertheless, process and extractive metallurgy are fields within their own right, and this work will be of interest to libraries supporting courses in the process area. - Synthesizes the most pertinent contemporary developments within process metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single complete solution, saving time for busy scientists - Helps metallurgists to predict changes and consequences and create or modify whatever process is deployed
Download or read book Treatise on Process Metallurgy Volume 1 Process Fundamentals written by and published by Newnes. This book was released on 2013-11-20 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process metallurgy provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. Coverage is divided into three volumes, entitled Process Fundamentals, encompassing process fundamentals, extractive and refining processes, and metallurgical process phenomena; Processing Phenomena, encompassing ferrous processing; non-ferrous processing; and refractory, reactive and aqueous processing of metals; and Industrial Processes, encompassing process modeling and computational tools, energy optimization, environmental aspects and industrial design. The work distils 400+ years combined academic experience from the principal editor and multidisciplinary 14-member editorial advisory board, providing the 2,608-page work with a seal of quality. The volumes will function as the process counterpart to Robert Cahn and Peter Haasen's famous reference family, Physical Metallurgy (1996)--which excluded process metallurgy from consideration and which is currently undergoing a major revision under the editorship of David Laughlin and Kazuhiro Hono (publishing 2014). Nevertheless, process and extractive metallurgy are fields within their own right, and this work will be of interest to libraries supporting courses in the process area. - Synthesizes the most pertinent contemporary developments within process metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single complete solution, saving time for busy scientists - Helps metallurgists to predict changes and consequences and create or modify whatever process is deployed
Download or read book Proceedings of the Nickel Cobalt 97 International Symposium written by and published by . This book was released on 1997 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fourth International Symposium on Recycling of Metals and Engineered Materials written by Donald L. Stewart, Jr. and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings collection continues the tradition established by earlier TMS Recycling Meetings in this series by presenting fundamental and practical aspects of recycling metals and engineered materials. This collection concentrates on fundamental and applied research and industrial practices in the recycling of a wide variety of materials including aluminum scrap recycling; aluminum dross processing; aluminum by-product recovery; automotive recycling; magnesium & titanium recycling; EAF dust processing; secondary zinc; secondary lead; secondary copper, nickel & coba< spent catalyst recycling; precious metals recycling; refractory recycling; and electronics/plating.
Download or read book Proceedings written by and published by . This book was released on 2001 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production of Manganese Ferroalloys written by Sverre E. Olsen and published by Tapir Academic Press. This book was released on 2007 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in our knowledge of thermodynamics and physico-chemical factors in manganese ferroalloy production has developed rapidly during the past twenty-five years or so. The authors' intention has been to use this basic knowledge in discussions of industrial manganese ferroalloy production. The book presents the principles and current knowledge of processes in the production of high carbon ferromanganese, silicomanganese and low carbon manganese alloys. The book is intended for professionals working in production, plant design or development. It will also be useful for researchers in industry, universities and research institutes. The book can be used as a textbook for courses in extractive and process metallurgy, and for company in-house courses. Thermodynamics of the slag and metal systems are extensively covered. Computational modelling based on assessed thermochemical databases has made it possible to calculate and present a large number of phase and equilibrium diagrams. These diagrams are useful for easy understanding and analysis of the complex heterogeneous equilibria in the manganese ferroalloy metallurgy. The manganese ferroalloys are mainly produced in electric submerged arc furnaces. Electrical relations are briefly discussed. Supply of raw materials, especially manganese ores and coke, is extremely important for the manganese industry. The book gives the reader appropriate knowledge regarding the selection the best of available raw materials. Environmental issues, including greenhouse gas emissions and climate changes, are of growing concern to ferroalloy producers. Carbon will always be needed as a reducing agent, and consequently emission of CO2 gas is inevitable. The book describes solutions to dealing with pollution problems and gives the latest guidelines for greenhouse gas inventories.
Download or read book UNITECR Proceedings written by and published by . This book was released on 2001 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Conference on Advances in the Theory of Ironmaking and Steelmaking ATIS 2009 December 09 11 2009 written by Govind S. Gupta and published by Allied Publishers. This book was released on 2009 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles presented in the International Conference on Advances in the Theory of Ironmaking and Steelmaking; organized by the Dept. of Material Engineering, IISc., Bangalore.
Download or read book Metallurgical and Materials Processing Principles and Technologies Yazawa International Symposium Materials Processing Fundamentals and New Technologies written by F. Kongoli and published by Wiley-TMS. This book was released on 2003 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the TMS 2003 Annual Meeting & Exhibition symposium honoring the life's work of Professor Akira Yazawa, this book, the first in a three-volume collection, discusses recent developments in the physical chemistry of metallurgical processes and physicochemical principles involved in materials processing, with a focus on materials processing fundamentals and new technologies. This volume is part of a three-volume set. You may purchase any volume individual or you may purchase the entire three-volume set in its entirety as listed below: Three-Volume Set : Metallurgical and Materials Processing Principles and Technologies (Yazawa International Symposium) Volume 1: Materials Processing Fundamentals and New Technologies Volume 2: High-Temperature Metal Production Volume 3: Aqueous and Electrochemical Processing A collection of papers from the 2003 TMS Annual Meeting and Exhibition, which was held in San Diego, California, March 2-6, 2003.
Download or read book Iron Steelmaker written by and published by . This book was released on 2002 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts Service Source Index written by American Chemical Society. Chemical Abstracts Service and published by . This book was released on 1907 with total page 2064 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key source to journal and conference abbreviations in the sciences. Although it focuses on chemistry, other scientific and engineering disciplines are also well represented. In addition to the abbreviation and full title, each entry also contains publishing info, title changes, language and frequency of publication, and libraries owning that title. Over 130,000 entries representing more than 70,000 publications dating back to 1907 are included.
Download or read book The Experimental Determination of Solubilities written by G. T. Hefter and published by John Wiley & Sons. This book was released on 2003-11-14 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Guidelines are provided on the reliability of various methods, as well as information for selecting the appropriate technique. * Unique coverage of the whole range of solubility measurements. * Very useful for investigators interested in embarking upon solubility measurements.
Download or read book Sulfide Smelting 98 written by J. A. Asteljoki and published by Minerals, Metals, & Materials Society. This book was released on 1998 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume focuses on all aspects of the production of primary metals from sulfide concentrates, with particular emphasis on smelting and converting operations and gas handling processes and equipment. Papers were presented during the 1998 TMS Annual Meeting & Exhibition.
Download or read book Journal of the South African Institute of Mining and Metallurgy written by South African Institute of Mining and Metallurgy and published by . This book was released on 2004-07 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
