Download or read book Proceedings of the 4th International Symposium on Plasma and Energy Conversion written by Dong Dai and published by Springer Nature. This book was released on 2023-05-23 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings highlight the fundamental researches and up-to-data developments on energy conversion and high-voltage application by means of low temperature and atmospheric pressure plasma. In recent years, plasma-assisted energy conversion gains increasing attention as an alternative to thermal-catalysis or electro-catalysis. These proceedings discuss and exchange cutting-edge scientific innovations and technological advances in fields like plasma-enabled synthesis of chemicals and fuels, plasma-enabled the environmental clean-up, plasma-enabled catalysis treatment, in-situ probing of plasma-catalyst interactions and its high-voltage applications, which show great potentials in industrial demands like CO2 hydrogenation, CH4 reforming and nitrogen fixation, plasma deposition, chemical synthesis, VOC abatement and high-voltage insulation. This collection of papers presents the main applications of plasma-induced energy conversion and high-voltage discharge in the form of separate chapters, including cutting-edge studies on conversion technology, complex mechanism simulation, in-situ detection and converged applications by artificial intelligence. These proceedings are suitable for researchers engaged in fields like plasma-catalysis, discharge diagnosis and modelling, chemical modelling and high-voltage applications. The major topics covered in the conference proceedings are: 1) Advanced plasma-catalysis conversion technology; 2) Advanced in-situ discharge diagnosis technology; 3) Advanced in-situ plasma-catalysis characterization; 4) Multi-scale or innovative modelling technology; 5) High-voltage discharge and application.
Download or read book Metallurgical Technologies Energy Conversion and Magnetohydrodynamic Flows written by Herman Branover and published by AIAA. This book was released on 1993 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 4th International Symposium on High Temperature Metallurgical Processing written by Tao Jiang and published by John Wiley & Sons. This book was released on 2013-02-21 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, global metallurgical industries have experienced fast and prosperous growth. High temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for the growth. This symposium provides a stage to introduce the advancements and developments of new high temperature metallurgical technologies and their applications to the areas of processing of minerals, extraction of metals, preparation of refractory and ceramic materials, sintering and synthesis of fine particles, treatment and recycling of slag and wastes, and saving of energy and protection of environment.
Download or read book Proceedings of the 5th International Symposium on Plasma and Energy Conversion written by Zhi Fang and published by Springer. This book was released on 2024-07-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book contains selected and expanded contributions presented at the 5th International Symposium on Plasma and Energy Conversion (ISPEC), held in Nanjing, China, on 27–29 October. 2023. These proceedings highlight the latest research findings, technological advances, and innovative ideas in plasma and energy conversion which are critical to addressing the global energy and environmental challenges. Oriented towards the international frontier of carbon emission reduction technologies and China's national strategic goals of carbon peak and carbon neutrality, plasma and related energy conversion has been gaining attention as a promising alternative to thermal-catalysis or electro-catalysis. The proceedings discuss and exchange cutting-edge scientific innovations and technological advances in fields such as the basic process of discharge plasmas, plasma-assisted synthesis of chemicals and fuels, plasma-controlled environmental pollution, plasma-assisted preparation and treatment of catalysts and function materials, plasma-interface interactions, plasma modelling and simulation technology, and high-voltage measurement and instrumentation, which show great industrial potentials in conversion and utilization of greenhouse gases (e.g. CO2 and CH4), nitrogen fixation, plasma deposition and chemical synthesis, environmental clean-up (e.g. gas cleaning and wastewater treatment), as well as the development of the corresponding plasma devices and driving power supplies. This collection of papers presents the main contributions of plasma and energy conversion in the form of separate chapters, including cutting-edge studies on conversion technology, synthesis and treatment technology, complex mechanism simulation and modelling, as well as in-situ detection and diagnosis. These proceedings are suitable for researchers engaged in fields like plasma chemistry, plasma-catalysis, discharge diagnosis and modelling, chemical modelling, and high-voltage applications.
Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1979 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Fourth International Symposium on Solid Oxide Fuel Cells SOFC IV written by M. Dokiya and published by The Electrochemical Society. This book was released on 1995 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Intersociety Energy Conversion Engineering Conference written by and published by . This book was released on 1995 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of 4th International Conference and Expo on Ceramics Composite Materials 2018 written by ConferenceSeries and published by ConferenceSeries. This book was released on with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: May 14-15, 2018 Rome, Italy Key Topics : Ceramics and Glasses, Advanced Ceramic Materials, Ceramics and Composites, Composite Materials, Ceramic Coatings, Advanced Materials and Technologies, Materials and Innovative Processing Ideas, Nanostructured Ceramics, Porous Ceramics, Sintering, Crystalline Materials, Ceramics Applications, Bioceramics and Medical Applications, Functional Ceramics and Inorganics, Ultra-High Temperature Ceramics, Ceramic Compounds: Ceramic Materials, Ceramics in Biology and Medicine, Ceramic Industry and Environment, Non-oxide Ceramics, Nuclear Ceramics, Sols, Gels and Organic Chemistry, Entrepreneurs Investment Meet, Ceramics Art, Bioceramics and Medical Applications
Download or read book Actuators written by Constantin Volosencu and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book promotes new research results in the field of modern actuators and their applications. New coverage of dielectric barrier discharge plasma actuators, polymeric microgripper based on the cascaded V-shaped electrothermal actuators, ionic polymer actuators, wideband actuators and energy harvesters, electromagnetic actuators and shape memory alloy actuators are comprehended. The book is structured in four sections: design, fabrication and simulation; control systems; medical applications and fault detection. Seven chapters are published following a rigorous selection process. In the first section, a study carried out to investigate experimentally and by numerical simulations a microscale plasma actuator; the design, fabrication, numerical simulations, and experimental investigations of a polymeric microgripper designed using the cascaded V-shaped electrothermal actuators; a review of the development of ionic polymer actuator with introduction of two kinds of typical polymer actuators - ionic polymer-metal composites and bucky gel actuator - with their basic principle and fabrication process and typical applications and a methodology of designing and testing wideband actuators and energy harvesters, treated as one mechanical resonator, with a discussion on shock harvester, resonant harvester and energy transmission system, are presented. The second section has a chapter dedicated to modeling, system identification and control of electromagnetic actuators with main focus on the actuators used in magnetic levitation, in fuel injection systems and in variable valve timing. The third section presents a study focused on quantifying the decline in tactile sensation associated with diabetic neuropathy and developed a measurement device that used a thin-shaped memory alloy wire as the actuator. The fourth section includes a chapter presenting a two-level fault diagnosis and root-cause analysis scheme for a class of interconnected invertible dynamic systems, which aims at detecting and identifying actuator fault and causes.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Future Energy Conferences and Symposia written by and published by . This book was released on 1988 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Reactor Technology Development and Utilization written by Salah Ud-Din Khan and published by Woodhead Publishing. This book was released on 2020-06-16 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Reactor Technology Development and Utilization presents the theory and principles of the most common advanced nuclear reactor systems and provides a context for the value and utilization of nuclear power in a variety of applications both inside and outside a traditional nuclear setting. As countries across the globe realize their plans for a sustainable energy future, the need for innovative nuclear reactor design is increasing, and this book will provide a deep understanding of how these technologies can aid in a region’s goal for clean and reliable energy. Dr Khan and Dr Nakhabov, alongside their team of expert contributors, discuss a variety of important topics, including nuclear fuel cycles, plant decommissioning and hybrid energy systems, while considering a variety of diverse uses such as nuclear desalination, hydrogen generation and radioisotope production. Knowledge acquired enables the reader to conduct further research in academia and industry, and apply the latest design, development, integration, safety and economic guidance to their work and research. Combines reactor fundamentals with a contemporary look at evolving trends in the design of advanced reactors and their application to both nuclear and non-nuclear uses Analyses the latest research and uses of hybrid systems which bring together nuclear technology with renewable energy technologies Presents applications, economic factors and an analysis of sustainability factors in one comprehensive resource
Download or read book Thermoelectric Materials and Devices written by Lidong Chen and published by Elsevier. This book was released on 2020-09-25 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectric Materials and Devices summarizes the latest research achievements over the past 20 years of thermoelectric material and devices, most notably including new theory and strategies of thermoelectric materials design and the new technology of device integration. The book's author has provided a bridge between the knowledge of basic physical/chemical principles and the fabrication technology of thermoelectric materials and devices, providing readers with research and development strategies for high performance thermoelectric materials and devices. It will be a vital resource for graduate students, researchers and technologists working in the field of energy conversion and the development of thermoelectric devices. Discusses the new theory and methods of thermoelectric materials design Combines scientific principles, along with synthesis and fabrication technologies in thermoelectric materials Presents the design optimization and interface technology for thermoelectric devices Introduces thermoelectric polymers and organic-inorganic thermoelectric composites
Download or read book ECOS 2012 The 25th International Conference on Efficiency Cost Optimization and Simulation of Energy Conversion Systems and Processes Perugia June 26th June 29th 2012 written by Umberto Desideri and published by Firenze University Press. This book was released on 2012 with total page 3218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8-volume set contains the Proceedings of the 25th ECOS 2012 International Conference, Perugia, Italy, June 26th to June 29th, 2012. ECOS is an acronym for Efficiency, Cost, Optimization and Simulation (of energy conversion systems and processes), summarizing the topics covered in ECOS: Thermodynamics, Heat and Mass Transfer, Exergy and Second Law Analysis, Process Integration and Heat Exchanger Networks, Fluid Dynamics and Power Plant Components, Fuel Cells, Simulation of Energy Conversion Systems, Renewable Energies, Thermo-Economic Analysis and Optimisation, Combustion, Chemical Reactors, Carbon Capture and Sequestration, Building/Urban/Complex Energy Systems, Water Desalination and Use of Water Resources, Energy Systems- Environmental and Sustainability Issues, System Operation/ Control/Diagnosis and Prognosis, Industrial Ecology.
Download or read book Accessions of Unlimited Distribution Reports written by and published by . This book was released on 1974-10-18 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The 6th International Symposium on Multiphase Flow Heat Mass Transfer and Energy Conversion written by Liejin Guo and published by American Institute of Physics. This book was released on 2010-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings volume collects information, research needs and future development of the fundamental aspects as well as the practical applications at such related fields as multiphase flow, heat mass transfer in energy, power, chemical, nuclear and petroleum engineering and industry, and renewable energy conversion and industrial utilization.
