Download or read book Proceedings of the 2013 International Conference on Advances in Construction Machinery and Vehicle Engineering written by Zheng Huiqiang and published by DEStech Publications, Inc. This book was released on 2013-11-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: the 10th anniversary of Chinese Journal of Construction Machinery. In order to celebrate the 20th anniversary of the association and the 10th anniversary of the journal, we will hold the following activities this year. 1. Continue to convene the fourth International Conference Symposium of 2013 on Construction Machinery and Vehicle Engineering Research Progress. 2. Continue to convene the fifth National Mechanical Engineering Doctoral Forum. This forum will be held in Xuzhou and the time is from August 20 to August 24 in 2013. 3. The highlevel expert forum will be held during Changsha Engineering Machinery Parts Expo. A dialogue will be taken on the issues of industry scientific innovation, accessories, testing and quality among universities, research institutes and enterprises. 4. The celebrations about the 20th anniversary of the association and the 10th anniversary of the journal will be conducted in Shanghai. The coun cil of the new editorial board and the executive director is convened for summing up the work of the association since it was founded 20 years ago and the work of the journal since it was founded 10 years ago, and planning for the future development. This International Conference is held in the circumstance of international economic crisis and domestic industrial structure adjustment. In the past year, sales market of construction machinery has been subjected to a certain shocks, and the enterprises have en countered a certain difficulties. For the future, however, I believe that such difficulties are temporary, and the prospect is bright. The construction machinery is to serve the mining and state infrastructure construction, and for China, along with most c ountries in the world which are developing countries, the infrastructure construction is still a significant part in the course of development, and the sound infrastructure will promote the development of their economies, even these countries which are in the leading position in economy development also attach great importance to the improvement of infrastructure. Therefore, construction machinery is indispensable and has a rigid demand. Currently, the international competition has not been only limited to terrestrial, since the possession of terrestrial was a foregone conclusion, but there will be more

Download or read book Proceedings of the 2007 International Conference on Advances in Construction Machinery and Vehicle Engineering written by Shi Laide and published by . This book was released on 2007 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The 8th International Conference on Advances in Construction Machinery and Vehicle Engineering written by Saman K. Halgamuge and published by Springer Nature. This book was released on with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2013 International Conference on Process Equipment Mechatronics Engineering and Material Science written by Jian Min Xu and published by Trans Tech Publications Ltd. This book was released on 2013-07-15 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Process Equipment, Mechatronics Engineering and Material Science (PEME2013), June 15-16, 2013, Wuhan, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 135 papers are grouped as follows: Chapter 1: Process Equipment; Chapter 2: Mechatronics, Control and Automation; Chapter 3: Material Engineering and Technologies of Material Processing; Chapter 4: Related Themes.

Download or read book Proceedings of 2013 Chinese Intelligent Automation Conference written by Zengqi Sun and published by Springer Science & Business Media. This book was released on 2013-07-10 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 2013 Chinese Intelligent Automation Conference presents selected research papers from the CIAC’13, held in Yangzhou, China. The topics include e.g. adaptive control, fuzzy control, neural network based control, knowledge based control, hybrid intelligent control, learning control, evolutionary mechanism based control, multi-sensor integration, failure diagnosis, and reconfigurable control. Engineers and researchers from academia, industry, and government can gain an inside view of new solutions combining ideas from multiple disciplines in the field of intelligent automation. Zengqi Sun and Zhidong Deng are professors at the Department of Computer Science, Tsinghua University, China.

Download or read book The 8th International Conference on Advances in Construction Machinery and Vehicle Engineering written by Saman K. Halgamuge and published by Springer. This book was released on 2024-06-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents select contributions from the 8th International Conference on Advances in Construction Machinery and Vehicle Engineering (ICACMVE 2023), focusing on the recent advances and best practices of Construction Machinery and Vehicle Engineering, related technologies and sciences to meet the challenges in mechanical design, mechanical control and smart manufacturing. The contents focus on design engineering, automation in engineering, construction machinery, intelligence applications, new energy and others. Some of the topics discussed here include advanced manufacturing technologies, industrial engineering and automation, design of mechanical systems, control engineering, automobile engineering, performance analysis of energy systems, thermal modelling and simulations of different systems, optimization and intelligence. The wide range of topics presented in this book will be useful for beginners, researchers, and mechanical engineering professionals.

Download or read book High Speed Pneumatic Theory and Technology Volume II written by Yaobao Yin and published by Springer Nature. This book was released on 2020-01-30 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest developments and the author’s own research achievements in high speed pneumatic control theory and applied technology. Chiefly focusing on the control system and energy system, it presents the basic theory and pioneering technologies for aerospace and aviation, while also addressing e.g. pneumatic servo control theory, pneumatic nonlinear mechanisms, aerothermodynamics, pneumatic servo mechanisms, and sample applications of high temperature and high speed gas turbine systems in aerospace, aviation, and major equipment.

Download or read book Verification and Evaluation of Computer and Communication Systems written by Belgacem Ben Hedia and published by Springer Nature. This book was released on 2020-12-19 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 14th International Conference on Verification and Evaluation of Computer and Communication Systems, VECoS 2020, which was supposed to be held in Xi’an, China, in October 2020, but was held virtually instead. The 19 full papers and 1 short paper presented in this volume were carefully reviewed and selected from 60 submissions. The aim of the VECoS conference is to bring together researchers and practitioners in the areas of verification, control, performance, and dependability evaluation in order to discuss state of the art and challenges in modern computer and communication systems in which functional and extra-functional properties are strongly interrelated. Thus, the main motivation for VECoS is to encourage the cross-fertilization between various formal verification and evaluation approaches, methods and techniques, and especially those developed for concurrent and distributed hardware/software systems. The papers are organized in the following topical sections: petri-net, simulation, and scheduling; formal modeling and verification, testing; and artificial intelligence and machine learning.

Download or read book Proceedings of the Third International Afro European Conference for Industrial Advancement AECIA 2016 written by Ajith Abraham and published by Springer. This book was released on 2017-08-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Afro-European Conference for Industrial Advancement (AECIA) brought together the foremost experts and excellent young researchers from Africa, Europe and the rest of the world to disseminate the latest results from various fields of engineering, information and communication technologies. This volume gathers the carefully selected papers from the third installment of the AECIA, which was held in Marrakech, Morocco from November 21 to 23, 2016. The papers address important topics like Automation Systems, Intelligent Techniques and Algorithms, Information and Communication Technology (ICT) Applications in Engineering, Control, Optimization and Processing, as well as manufacturing-related topics. As such, it offers a valuable reference guide for researchers, students and practitioners in the fields of computer science and engineering.

Download or read book Automation in Construction toward Resilience written by Ehsan Noroozinejad Farsangi and published by CRC Press. This book was released on 2023-09-29 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the word "automation" may conjure images of robots taking over jobs, the reality is much more nuanced. In construction, for instance, automation is less likely to diminish employment opportunities than it is to increase productivity. Indeed, automation alongside the global need for new and updated infrastructure and better and more affordable housing can help shape the direction of the construction industry. The key will be anticipating and preparing for the shift, in part by developing new skills in the current and future workforce. This book presents all aspects of automation in construction pertaining to the use of information technologies in design, engineering, construction technologies, and maintenance and management of constructed facilities. The broad scope encompasses all stages of the construction life cycle from initial planning and design, through the construction of the facility, its operation, and maintenance, to the eventual dismantling and recycling of buildings and engineering structures. Features: Examines Building Information Management systems, allowing on-site execution of construction more efficient, and for project teams to eliminate mistakes and better coordinate the workforce Presents the latest information on the automation of modular construction, production in factories, including 3-D printing of components such as facades, or even load-bearing and essential components

Download or read book Modeling and Control of Hybrid Propulsion System for Ground Vehicles written by Yuan Zou and published by Springer. This book was released on 2018-07-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the systematic design of architectures, parameters and control of typical hybrid propulsion systems for wheeled and tracked vehicles based on a combination of theoretical research and engineering practice. Adopting a mechatronic system dynamics perspective, principles and methods from the fields of optimal control and system optimization are applied in order to analyze the hybrid propulsion configuration and controller design. Case investigations for typical hybrid propulsion systems of wheeled and tracked ground vehicles are also provided.

Download or read book The Best of COMVEC 2016 Select Technical Papers from the SAE Commercial Vehicle Engineering Congress written by Kevin Jost and published by SAE International. This book was released on 2016-09-24 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection highlights some of the best technical papers that represent the breadth of the entire technical program. Leading industry perspectives are reflected by the corporate contributions that are included in this group, along with a specific focus on connectivity, the theme of the 2016 event. The commercial vehicle industry has always been focused on improving efficiency. These ten characteristic offerings present cutting-edge trends, technologies, and solutions that provide greater benefit and the application of knowledge to solve problems and guide future innovation. These studies are presented by experts from industrial, governmental, and academic partners on topics that include: • Autonomous commercial vehicles • Computational fluid dynamics and aerodynamics for heavy-duty, on-road applications • Fuel and emissions efficiency of medium-duty powertrain configurations • Intelligently controlled air-suspension systems • Improving total cost of ownership by gains in thermal efficiency • New simulation and testing techniques enabling next generation commercial vehicle technology The leadership team has focused on bringing in a broad mixture of participants to COMVEC to discuss current technologies and the future challenges of the commercial vehicle industry. This first of its kind special publication draws on the strength of the event’s program and features ten of the best technical papers from the SAE International Congress.

Download or read book Hybrid Electric Vehicles written by Teresa Donateo and published by BoD – Books on Demand. This book was released on 2017-06-21 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on hybrid electric vehicles brings out six chapters on some of the research activities through the wide range of current issues on hybrid electric vehicles. The first section deals with two interesting applications of HEVs, namely, urban buses and heavy duty working machines. The second one groups papers related to the optimization of the electricity flows in a hybrid electric vehicle, starting from the optimization of recharge in PHEVs through advance storage systems, new motor technologies, and integrated starter-alternator technologies. A comprehensive analysis of the technologies used in HEVs is beyond the aim of the book. However, the content of this volume can be useful to scientists and students to broaden their knowledge of technologies and application of hybrid electric vehicles.

Download or read book Advanced Material Engineering written by Yongchang Liu and published by World Scientific. This book was released on 2015-09-08 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of papers presented at the 2015 International Conference on Advanced Material Engineering (AME 2015), held in Guangzhou, China. With the rapid development of industry and information technology, researchers across all fields began to discuss new ideas related to materials science and manufacturing technology. This proceedings provide a valuable insight from researchers and scientists who exchanged their ideas in the conference. Contents:Material Physics and Chemistry:Composites MaterialsNanomaterials and NanocompositesIron and SteelCeramic, Films and GlassesSemiconductors MaterialChemical MaterialBiomaterialsOptical, Electronic, Magnetic MaterialsNew Energy Materials and Environmental Friendly MaterialsNew Functional MaterialsMaterials Process Engineering:Thermal Engineering Theory and ApplicationsPolymer Materials ProcessingMetallurgy Technology and ApplicationSurface Engineering/CoatingsMaterials FormingWelding & JoiningLaser ProcessingSevere Plastic DeformationTribology in Manufacturing ProcessesCasting and solidificationEmerging Areas of Materials Science:Atomic Molecular and Laser PhysicsSpintronicsSolid State Ionics (Materials and Devices)Plasma PhysicsNanobiomaterials / Drug Delivery Readership: Graduate students and research professionals in materials engineering keeping up with the latest advancements in the field. Keywords:Composites;Nanomaterials;Biomaterials;Energy Materials;Functional Materials;Semiconductors;Metallurgy;Semiconductors;Solid State Ionics;Optical Materials;Magnetic Materials;Electronic MaterialsKey Features:Latest Research results on Material EngineeringCross-disciplinary ResearchResearch results come from all over the worldSome famous professors give the keynote speech on the conference

Download or read book Advanced Machine Intelligence and Signal Processing written by Deepak Gupta and published by Springer Nature. This book was released on 2022-06-25 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advancements in the areas of machine learning, computer vision, pattern recognition, computational learning theory, big data analytics, network intelligence, signal processing, and their applications in real world. The topics covered in machine learning involve feature extraction, variants of support vector machine (SVM), extreme learning machine (ELM), artificial neural network (ANN), and other areas in machine learning. The mathematical analysis of computer vision and pattern recognition involves the use of geometric techniques, scene understanding and modeling from video, 3D object recognition, localization and tracking, medical image analysis, and so on. Computational learning theory involves different kinds of learning like incremental, online, reinforcement, manifold, multitask, semi-supervised, etc. Further, it covers the real-time challenges involved while processing big data analytics and stream processing with the integration of smart data computing services and interconnectivity. Additionally, it covers the recent developments to network intelligence for analyzing the network information and thereby adapting the algorithms dynamically to improve the efficiency. In the last, it includes the progress in signal processing to process the normal and abnormal categories of real-world signals, for instance signals generated from IoT devices, smart systems, speech, videos, etc., and involves biomedical signal processing: electrocardiogram (ECG), electroencephalogram (EEG), magnetoencephalography (MEG), and electromyogram (EMG).

Download or read book Advances in Mechanical Design written by Jianrong Tan and published by Springer. This book was released on 2017-11-14 with total page 1707 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on innovation, these proceedings present recent advances in the field of mechanical design in China and offer researchers, scholars and scientists an international platform to present their research findings and exchange their ideas. In the context of the “Made in China 2025” development strategy, one central aspect of the ICMD2017 was Innovative Design Pushes “Made in China 2025.” The book highlights research hotspots in mechanical design, such as design methodology, green design, robotics and mechanics, and reliability design, while also combining industrial design and mechanical design.

Download or read book Advances in Energy Science and Equipment Engineering II Volume 1 written by Shiquan Zhou and published by CRC Press. This book was released on 2017-09-19 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2016 2nd International Conference on Energy Equipment Science and Engineering (ICEESE 2016) will be held on November 12-14, 2016 in Guangzhou, China. ICEESE 2016 is to bring together innovative academics and industrial experts in the field of energy equipment science and engineering to a common forum. The primary goal of the conference is to promote research and developmental activities in energy equipment science and engineering and another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working all around the world. The conference will be held every year to make it an ideal platform for people to share views and experiences in energy equipment science and engineering and related areas.