Download or read book Languages and Compilers for Parallel Computing written by Călin Cașcaval and published by Springer. This book was released on 2014-09-30 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 26th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2013, held in Tokyo, Japan, in September 2012. The 20 revised full papers and two keynote papers presented were carefully reviewed and selected from 44 submissions. The focus of the papers is on following topics: parallel programming models, compiler analysis techniques, parallel data structures and parallel execution models, to GPGPU and other heterogeneous execution models, code generation for power efficiency on mobile platforms, and debugging and fault tolerance for parallel systems.
Download or read book Languages and Compilers for Parallel Computing written by Gheorghe Almási and published by Springer Science & Business Media. This book was released on 2007-05-25 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 19th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2006, held in New Orleans, LA, USA in November 2006. The 24 revised full papers presented together with two keynote talks cover programming models, code generation, parallelism, compilation techniques, data structures, register allocation, and memory management.
Download or read book Languages and Compilers for Parallel Computing written by Guang R. Gao and published by Springer. This book was released on 2010-06-10 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Itisourpleasuretopresentthepapersacceptedforthe22ndInternationalWo- shop on Languages and Compilers for Parallel Computing held during October 8–10 2009 in Newark Delaware, USA. Since 1986, LCPC has became a valuable venueforresearchersto reportonworkinthegeneralareaofparallelcomputing, high-performance computer architecture and compilers. LCPC 2009 continued this tradition and in particular extended the area of interest to new parallel computing accelerators such as the IBM Cell Processor and Graphic Processing Unit (GPU). This year we received 52 submissions from 15 countries. Each submission receivedatleastthreereviewsandmosthadfour.ThePCalsosoughtadditional externalreviewsforcontentiouspapers.ThePCheldanall-dayphoneconference on August 24 to discuss the papers. PC members who had a con?ict of interest were asked to leave the call temporarily when the corresponding papers were discussed. From the 52 submissions, the PC selected 25 full papers and 5 short paperstobeincludedintheworkshopproceeding,representinga58%acceptance rate. We were fortunate to have three keynote speeches, a panel discussion and a tutorial in this year’s workshop. First, Thomas Sterling, Professor of Computer Science at Louisiana State University, gave a keynote talk titled “HPC in Phase Change: Towards a New Parallel Execution Model.” Sterling argued that a new multi-dimensional research thrust was required to realize the design goals with regard to power, complexity, clock rate and reliability in the new parallel c- puter systems.ParalleX,anexploratoryexecutionmodeldevelopedbySterling’s group was introduced to guide the co-design of new architectures, programming methods and system software.
Download or read book Languages and Compilers for Parallel Computing written by José Nelson Amaral and published by Springer Science & Business Media. This book was released on 2008-12 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 21th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2008, held in Edmonton, Canada, in July/August 2008. The 18 revised full papers and 6 revised short papers presented were carefully reviewed and selected from 35 submissions. The papers address all aspects of languages, compiler techniques, run-time environments, and compiler-related performance evaluation for parallel and high-performance computing and comprise also presentations on program analysis that are precursors of high performance in parallel environments.
Download or read book The Compiler Design Handbook written by Y.N. Srikant and published by CRC Press. This book was released on 2018-10-03 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s embedded devices and sensor networks are becoming more and more sophisticated, requiring more efficient and highly flexible compilers. Engineers are discovering that many of the compilers in use today are ill-suited to meet the demands of more advanced computer architectures. Updated to include the latest techniques, The Compiler Design Handbook, Second Edition offers a unique opportunity for designers and researchers to update their knowledge, refine their skills, and prepare for emerging innovations. The completely revised handbook includes 14 new chapters addressing topics such as worst case execution time estimation, garbage collection, and energy aware compilation. The editors take special care to consider the growing proliferation of embedded devices, as well as the need for efficient techniques to debug faulty code. New contributors provide additional insight to chapters on register allocation, software pipelining, instruction scheduling, and type systems. Written by top researchers and designers from around the world, The Compiler Design Handbook, Second Edition gives designers the opportunity to incorporate and develop innovative techniques for optimization and code generation.
Download or read book Languages and Compilers for Parallel Computing written by Keith Cooper and published by Springer Science & Business Media. This book was released on 2011-03-07 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 23rd International Workshop on Languages and Compilers for Parallel Computing, LCPC 2010, held in Houston, TX, USA, in October 2010. The 18 revised full papers presented were carefully reviewed and selected from 47 submissions. The scope of the workshop spans foundational results and practical experience, and targets all classes of parallel platforms in- cluding concurrent, multithreaded, multicore, accelerated, multiprocessor, and cluster systems.
Download or read book Languages and Compilers for Parallel Computing written by Eduard Ayguadé and published by Springer. This book was released on 2007-05-16 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 18th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2005, held in Hawthorne, NY, USA in October 2005. The 26 revised full papers and eight short papers presented were carefully selected during two rounds of reviewing and improvement. The papers are organized in topical sections.
Download or read book Languages and Compilers for Parallel Computing written by Utpal Banerjee and published by Springer Science & Business Media. This book was released on 1993-12-08 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles in this volume are revised versions of the best papers presented at the Fifth Workshop on Languages and Compilers for Parallel Computing, held at Yale University, August 1992. The previous workshops in this series were held in Santa Clara (1991), Irvine (1990), Urbana (1989), and Ithaca (1988). As in previous years, a reasonable cross-section of some of the best work in the field is presented. The volume contains 35 papers, mostly by authors working in the U.S. or Canada but also by authors from Austria, Denmark, Israel, Italy, Japan and the U.K.
Download or read book Languages and Compilers for Parallel Computing written by Vikram Adve and published by Springer Science & Business Media. This book was released on 2008-08-04 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 20th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2007, held in Urbana, IL, USA, in October 2007. The 23 revised full papers presented were carefully reviewed and selected from 49 submissions. The papers are organized in topical sections on reliability, languages, parallel compiler technology, libraries, run-time systems and performance analysis, and general compiler techniques.
Download or read book Languages and Compilers for Parallel Computing written by James Brodman and published by Springer. This book was released on 2015-04-30 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 27th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2014, held in Hillsboro, OR, USA, in September 2014. The 25 revised full papers were carefully reviewed and selected from 39 submissions. The papers are organized in topical sections on accelerator programming; algorithms for parallelism; compilers; debugging; vectorization.
Download or read book Languages and Compilers for Parallel Computing written by Mary Hall and published by Springer Nature. This book was released on 2019-11-12 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 31st International Workshop on Languages and Compilers for Parallel Computing, LCPC 2018, held in Salt Lake City, UT, USA, in October 2018. The 14 revised full papers were carefully reviewed and selected from 26 submissions. Specific topics are compiling for parallelism and parallel compilers, static, dynamic, and adaptive optimization of parallel programs, parallel programming models and languages, formal analysis and verification of parallel programs, parallel runtime systems and libraries, performance analysis and debugging tools for concurrency and parallelism, parallel algorithms and concurrent data structures, parallel applications, synchronization and concurrency control, software engineering for parallel programs, fault tolerance for parallel systems, and parallel programming and compiling for heterogeneous systems.
Download or read book Languages and Compilers for Parallel Computing written by Xipeng Shen and published by Springer. This book was released on 2016-02-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 28th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2015, held in Raleigh, NC, USA, in September 2015. The 19 revised full papers were carefully reviewed and selected from 44 submissions. The papers are organized in topical sections on programming models, optimizing framework, parallelizing compiler, communication and locality, parallel applications and data structures, and correctness and reliability.
Download or read book C Compilers for ASIPs written by Manuel Hohenauer and published by Springer Science & Business Media. This book was released on 2009-10-13 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a novel approach for Architecture Description Language (ADL)-based instruction-set description that enables the automatic retargeting of the complete software toolkit from a single ADL processor model.
Download or read book Model Based Design for Embedded Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2018-09-03 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.
Download or read book Software Language Engineering written by Benoit Combemale and published by Springer. This book was released on 2014-09-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Conference on Software Language Engineering, SLE 2014, held in Västerås, Sweden, in September 2014. The 19 revised full papers presented together with 1 invited paper were carefully reviewed and selected from 61 initial submissions. The papers observe software languages from different and yet complementary perspectives: programming languages, model driven engineering, domain specific languages, semantic web, and from different technological spaces: context-free grammars, object-oriented modeling frameworks, rich data, structured data, object-oriented programming, functional programming, logic programming, term-rewriting, attribute grammars, algebraic specification, etc.
Download or read book Semantics and Algebraic Specification written by Jens Palsberg and published by Springer Science & Business Media. This book was released on 2009-08-28 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: proceedings of the symposium. Somecontributorswereunabletoattendthe event.
Download or read book The VLSI Handbook written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-10-03 with total page 2320 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the new millenium, Wai-Kai Chen introduced a monumental reference for the design, analysis, and prediction of VLSI circuits: The VLSI Handbook. Still a valuable tool for dealing with the most dynamic field in engineering, this second edition includes 13 sections comprising nearly 100 chapters focused on the key concepts, models, and equations. Written by a stellar international panel of expert contributors, this handbook is a reliable, comprehensive resource for real answers to practical problems. It emphasizes fundamental theory underlying professional applications and also reflects key areas of industrial and research focus. WHAT'S IN THE SECOND EDITION? Sections on... Low-power electronics and design VLSI signal processing Chapters on... CMOS fabrication Content-addressable memory Compound semiconductor RF circuits High-speed circuit design principles SiGe HBT technology Bipolar junction transistor amplifiers Performance modeling and analysis using SystemC Design languages, expanded from two chapters to twelve Testing of digital systems Structured for convenient navigation and loaded with practical solutions, The VLSI Handbook, Second Edition remains the first choice for answers to the problems and challenges faced daily in engineering practice.
