Download or read book Proceedings of the U S National Congress of Applied Mechanics written by and published by . This book was released on 1994 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Selected Papers By Chia shun Yih In 2 Volumes written by W M Lai and published by World Scientific. This book was released on 1991-05-30 with total page 1067 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume represents a lifetime's work of the author, for many years the Stephen P Timoshenko Distinguished University Professor of Fluid Mechanics of the University of Michigan. The papers selected treat the dynamics of stratified or rotating fluids, internal or surface waves, hydrodynamic stability, jets and plumes, flow in porous media, and certain aspects of hydrodynamics in magnetic or electric fields. When the papers are viewed in perspective, heterogeneity, whether in density, entropy, circulation, viscosity, or in some quantity which can be called magnetic circulation, seems to be a recurring theme in the phenomena investigated. It provides a general framework through which the understanding of the various phenomena is facilitated by the satisfying similarity underlying their seeming diversity.

Download or read book Constitutive Equations for Engineering Materials written by Wai-Fah Chen and published by Elsevier. This book was released on 2013-10-22 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Equations for Engineering Materials, Volume 1: Elasticity and Modeling, Revised Edition focuses on theories on elasticity and plasticity of engineering materials. The book first discusses vectors and tensors. Coordinate systems, vector algebra, scalar products, vector products, transformation of coordinates, indicial notation and summation convention, and triple products are then discussed. The text also ponders on analysis of stress and strain and presents numerical analysis. The book then discusses elastic stress-strain relations. Basic assumptions; need for elastic models; isotropic linear stress-strain relations; principle of virtual work; strain energy and complementary energy density in elastic solids; and incremental relations grounded on secant moduli are described. The text also explains linear elasticity and failure criteria for concrete and non-linear elasticity and hypoelastic models for concrete. The selection further tackles soil elasticity and failure criteria. Mechanical behavior of soils; failure criteria of soils; and incremental stress-strain models based on modification of the isotropic linear elastic formulation are considered. The text is a good source of data for readers interested in studying the elasticity and plasticity of engineering materials.

Download or read book Cyclic Stress Strain and Plastic Deformation Aspects of Fatigue Crack Growth written by L. F. Impellizzeri and published by ASTM International. This book was released on 1977 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Behavior of Sandwich Structures of Isotropic and Composite Materials written by JackR. Vinson and published by Routledge. This book was released on 2018-05-04 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Behavior of Sandwich Structures of Isotropic and Composite Materials presents the mathematics, descriptions, and analytical techniques in the growing field of sandwich structures. From a background in sandwich structures to thermoelastic problems of sandwich structures and sandwich shell theory, the book provides the knowledge needed to analyze, design, and optimize various sandwich structures. As one would expect from a book on sandwich structures, this volume discusses special failure modes such as face wrinkling and core shear instability. Coverage includes not only honeycomb cores, but also foam, web, and truss cores. An important topic in composite structure design, optimization is explored in two chapters on sandwich plates and sandwich shells. The author presents the optimization techniques in closed form and the methods are applicable to material selection and geometric design. The book also contains a set of problems and references at the end of each chapter. This text is ideal for engineers-in-training, as well as practical engineers who desire a comprehensive understanding of sandwich structures technology.

Download or read book The Freezing Process and Mechanics of Frozen Ground written by Ronald F. Scott and published by . This book was released on 1969 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outline is given two current theories on the freezing of water in soils. The classification and description, standardized in the United States and Canada, of frozen soils, leads to some laboratory data on the mechanical behavior of frozen soils. The monograph concludes with the application of linear viscoelastic theory to typical field problems. (Author).

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Dynamic Systems and Stability written by D.E. Beskos and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: On December 2-5, 1991, a Symposium on Thermal Stresses, Dynamics and Stability honoring Professor Bruno A. Boley on the occasion of his 65th birthday was held in Atlanta, Georgia during the Winter Annual Meeting of the American Society of Mechanical Engineers. The papers presented during the Symposium by some of Professor Boley's former students and colleagues cover those areas of applied mechanics where most of his contributions have been made over the years. These papers have been written in tribute to Professor Boley's distinguished scientific career and out of genuine affection and respect for him. The present volume consists of those Symposium papers that belong to the areas of Dynamics and Stability and constitute recent advances in the field. A special issue of the Journal of Thermal Stresses has been reserved for publication of the Symposium papers on Thermal Stresses, under the editorship of Professor R. B. Hetnarski. The present volume begins with a biographical sketch and bibliography of Professor Boley, along with a list of his doctoral students. Thirteen papers on dynamics and stability follow. The first four papers deal with wave propagation and vibration studies in solids and structures. The next two papers study wave propagation in fluids, while the seventh paper is concerned with the dynamic response of random media. Two papers dealing with structural vibrations exhibiting instability and one dealing with dynamic buckling delamination are presented next. The last three papers are concerned with instability in solids and structures.

Download or read book Computational Mechanics 86 written by Genki Yagawa and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is often said that these days there are too many conferences on general areas of computational mechanics. mechanics. and numer ical methods. vJhile this may be true. the his tory of scientific conferences is itself quite short. According to Abraham Pais (in "Subtle is the Lord ...• " Oxford University Press. 1982. p.80). the first international scientific conference ever held was the Karlsruhe Congress of Chemists. 3-5 September 1860 in Karlsruhe. Germany. There were 127 chemists in attendance. and the participants came from Austria. Belgium. France. Germany. Great Britain. Italy. Mexico. Poland. Russia. Spain. Sweden. and Switzerland. At the top of the agenda of the points to be discussed at this conference was the question: "Shall a difference be made between the expressions molecule and atom?" Pais goes on to note: "The conference did not at once succeed in bringing chemists closer together ... It is possible that the older men were offended by the impetuous behavior and imposing manner of the younger scientists" (see references cited in Pais' book). It may be observed that history. in general. repeats itself. However. at ICCM-86 in Tokyo. roughly 500 participants from both the West and the East were in attendance; there were only scholarly exchanges; the young tried to learn from the more experienced. and a spirit of international academic cooperation prevailed.

Download or read book Micromechanics of Composite Materials written by George Dvorak and published by Springer Science & Business Media. This book was released on 2012-12-09 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad exposition of analytical and numerical methods for modeling composite materials, laminates, polycrystals and other heterogeneous solids, with emphasis on connections between material properties and responses on several length scales, ranging from the nano and microscales to the macroscale. Many new results and methods developed by the author are incorporated into the rich fabric of the subject, which has developed from the work of many researchers over the last 50 years. Among the new results, the book offers an extensive analysis of internal and interface stresses caused by eigenstrains, such as thermal, transformation and inelastic strains in the constituents, which often exceed those caused by mechanical loads, and of inelastic behavior of metal matrix composites. Fiber prestress in laminates, and modeling of functionally graded materials are also analyzed. Furthermore, this book outlines several key subjects on modeling the properties of composites reinforced by particles of various shapes, aligned fibers, symmetric laminated plates and metal matrix composites. This volume is intended for advanced undergraduate and graduate students, researchers and engineers interested and involved in analysis and design of composite structures.

Download or read book Proceedings of the Third U S National Congress of Applied Mechanics written by R. M. Haythornthwaite and published by . This book was released on 1958 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Inelastic Deformation of Metals written by Donald C. Stouffer and published by John Wiley & Sons. This book was released on 1996-01-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a totally new approach, this groundbreaking book establishesthe logical connections between metallurgy, materials modeling, andnumerical applications. In recognition of the fact that classicalmethods are inadequate when time effects are present, or whencertain types of multiaxial loads are applied, the new, physicallybased state variable method has evolved to meet these needs.Inelastic Deformation of Metals is the first comprehensivepresentation of this new technology in book form. It developsphysically based, numerically efficient, and accurate methods forpredicting the inelastic response of metals under a variety ofloading and environmental conditions. More specifically, Inelastic Deformation of Metals: * Demonstrates how to use the metallurgical information to developmaterial models for structural simulations and low cyclic fatiguepredictions. It presents the key features of classical and statevariable modeling, describes the different types of models andtheir attributes, and provides methods for developing models forspecial situations. This book's innovative approach covers such newtopics as multiaxial loading, thermomechanical loading, and singlecrystal superalloys. * Provides comparisons between data and theory to help the readermake meaningful judgments about the value and accuracy of aparticular model and to instill an understanding of how metalsrespond in real service environments. * Analyzes the numerical methods associated with nonlinearconstitutive modeling, including time independent, time dependentnumerical procedures, time integration schemes, inversiontechniques, and sub-incrementing. Inelastic Deformation of Metals is designed to give theprofessional engineer and advanced student new and expandedknowledge of metals and modeling that will lead to more accuratejudgments and more efficient designs. In contrast to existing plasticity books, which discuss few if anycorrelations between data and models, this breakthrough volumeshows engineers and advanced students how materials and modelsactually do behave in real service environments. As greater demandsare placed on technology, the need for more meaningful judgmentsand more efficient designs increases dramatically. Incorporatingthe state variable approach, Inelastic Deformation of Metals: * Provides an overview of a wide variety of metal responsecharacteristics for rate dependent and rate independent loadingconditions * Shows the correlations between the mechanical response propertiesand the deformation mechanisms, and describes how to use thisinformation in constitutive modeling * Presents different modeling options and discusses the usefulnessand limitations of each modeling approach, with material parametersfor each model * Offers numerous examples of material response and correlationwith model predictions for many alloys * Shows how to implement nonlinear material models in stand-aloneconstitutive model codes and finite element codes An innovative, comprehensive, and essential book, InelasticDeformation of Metals will help practicing engineers and advancedstudents in mechanical, aerospace, civil, and metallurgicalengineering increase their professional skills in the moderntechnological environment.

Download or read book Fracture Toughness Testing and Its Applications written by and published by ASTM International. This book was released on 1965 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-04-25 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference provides thorough and in-depth coverage of the latest production and processing technologies encountered in the aluminum alloy industry, discussing current analytical methods for aluminum alloy characterization as well as extractive metallurgy, smelting, master alloy formation, and recycling. The Handbook of Aluminum: Volume 2 examines environmental pollution and toxicity in each stage of aluminum alloy production and metal processing, illustrates microstructure evolution modeling, and describes work hardening, recovery, recrystallization, and grain growth. The authors cover potential applications of various aluminum intermetallics, recent surface modification techniques, and types and causes of aluminum alloy corrosion.

Download or read book Wave Propagation in Structures written by James F. Doyle and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of wave propagation seems very remote to many engineers, even to those who are involved in structural dynamics. I think one of the reasons for this is that the examples usually taught in school were either so simple as to be inapplicable to real world problems, or so mathematically abstruse as to be intractable. This book contains an approach, spectral analysis, that I have found to be very effective in analyzing waves. What has struck me most about this approach is how I can use the same analytic framework to do predictions as well as to manipulate experimental data. As an experimentalist, I had found it very frustrating having my analytical tools incompatible with my experiments. For example, it is experimentally impos sible to generate a step-function wave and yet that is the type of analytical solution available. Spectral analysis is very encompassing - it touches on analysis, numerical meth ods, and experimental methods. I wanted this book to do justice to its versatility, so many subjects are introduced. As a result some areas may seem a little thin and I regret this. But I do hope, nonetheless, that the bigger picture, the unity, comes across. To encourage you to try the spectral analysis approach I have included complete source code listings to some of the computer programs mentioned in the text.

Download or read book Numerical Models in Geomechanics written by G.N. Pande and published by CRC Press. This book was released on 2020-12-17 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume a number of developments on a variety of topics have been reported. These topics include: partially saturated soil; instabilities in soil behaviour; environmental geomechanics; parallel computing; and applications to tunnels, embankments, slopes, foundations and anchors.

Download or read book Forming the Future written by Glenn Daehn and published by Springer Nature. This book was released on 2021-07-10 with total page 2890 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this collection, scientists and engineers from across industry, academia, and government present their latest improvements and innovations in all aspects of metal forming science and technology, with the intent of facilitating linkages and collaborations among these groups. Chapters cover the breadth of metal forming topics, from fundamental science to industrial application.