Download or read book Proceedings of the IEEE International Conference on Industrial Technology ICIT written by and published by . This book was released on 2002 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Fourth International Conference on Signal and Image Processing 2012 ICSIP 2012 written by Mohan S and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings includes cutting-edge research articles from the Fourth International Conference on Signal and Image Processing (ICSIP), which is organised by Dr. N.G.P. Institute of Technology, Kalapatti, Coimbatore. The Conference provides academia and industry to discuss and present the latest technological advances and research results in the fields of theoretical, experimental, and application of signal, image and video processing. The book provides latest and most informative content from engineers and scientists in signal, image and video processing from around the world, which will benefit the future research community to work in a more cohesive and collaborative way.

Download or read book Advanced DC DC Converters written by Fang Lin Luo and published by CRC Press. This book was released on 2016-12-08 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC/DC conversion techniques have undergone rapid development in recent decades. With the pioneering work of authors Fang Lin Luo and Hong Ye, DC/DC converters have now been sorted into their six generations, and by a rough count, over 800 different topologies currently exist, with more being developed each year. Advanced DC/DC Converters, Second Edition offers a concise, practical presentation of DC/DC converters, summarizes the spectrum of conversion technologies, and presents new ideas and more than 200 new topologies. Beginning with background material on DC/DC conversion, the book later discusses both voltage lift and super-lift converters. It then proceeds through each generation, including the groundbreaking sixth generation—converters developed by the authors that can be cascaded for high voltage transfer gain. This new edition updates every chapter and offers three new chapters. The introduction of the super-lift technique is an outstanding achievement in DC/DC conversion technology, and the ultra-lift technique and hybrid split-capacitor/inductor applied in Super-Lift Luo-Converters are introduced in Chapters 7 and 8. In Chapter 9, the authors have theoretically defined a new concept, Energy Factor (EF), researched the relations between EF and the mathematical modelling for power DC/DC converters, and demonstrated the modeling method for two converters. More than 320 figures, 60 tables, and 500 formulae allow the reader to more easily grasp the overall structure of advanced DC/DC converters, provide fast access to precise data, and help them to quickly determine the values of their own circuit components.

Download or read book Networking and Telecommunications Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2010-01-31 with total page 2041 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This multiple-volume publications exhibits the most up-to-date collection of research results and recent discoveries in the transfer of knowledge access across the globe"--Provided by publisher.

Download or read book Proceedings of the 7th International Conference on Axiomatic Design written by Mary Kathryn Thompson and published by ICAD 2013. This book was released on 2013-06-26 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ECEG2016 Proceedings of 16th European Conference on e Government ECEG 2016 written by Mitja De Man and published by Academic Conferences and publishing limited. This book was released on 2016-06-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Information Control Problems in Manufacturing 2004 2 volume Set written by Peter Kopacek and published by Gulf Professional Publishing. This book was released on 2005-08-12 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Inspection Planning written by Abdulrahman Al-Ahmari and published by CRC Press. This book was released on 2016-12-19 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inspection process is one of the most important steps in manufacturing industries because it safeguards high quality products and customer satisfaction. Manual inspection may not provide the desired accuracy. This book introduces and implements a new methodology and develops the supporting technologies for automated inspection planning based on Computer Aided Design (CAD) models. It also provides and implements an efficient link for automated operation based on Coordinate Measuring Machine (CMM). The link’s output is a DMIS code programming file based on the inspection planning table that is executed on CMM.

Download or read book Synchronous and Resonant DC DC Conversion Technology Energy Factor and Mathematical Modeling written by Fang Lin Luo and published by CRC Press. This book was released on 2018-10-03 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numbers alone are enough to describe the importance of DC/DC converters in modern power engineering. There are more than 500 recognized topologies, with more added each year. In their groundbreaking book Advanced DC/DC Converters, expert researchers Luo and Ye organized these technologies into six generations and illustrated their principles and operation through examples of over 100 original topologies. In chapters carefully drawn from that work, Synchronous and Resonant DC/DC Conversion Technology, Energy Factor, and Mathematical Modeling provides a focused, concise overview of synchronous and multiple-element resonant power converters. This reference carefully examines the topologies of more than 50 synchronous and resonant converters by illustrating the design of several prototypes developed by the authors. Using more than 100 diagrams as illustration, the book supplies insight into the fundamental concepts, design, and applications of the fifth (synchronous) and sixth (multiple-element resonant) converters as well as DC power sources and control circuits. The authors also discuss EMI/EMC problems and include a new chapter that introduces the new concept of Energy Factor (EF) and its importance in mathematical modeling as well as analyzing the transient process and impulse response of DC/DC converters. Synchronous and Resonant DC/DC Conversion Technology, Energy Factor, and Mathematical Modeling supplies a quick and accessible guide for anyone in need of specialized information on synchronous and resonant DC/DC converter technologies.

Download or read book Advances in Mechatronics written by Horacio Martinez-Alfaro and published by BoD – Books on Demand. This book was released on 2011-08-29 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous books have already been published specializing in one of the well known areas that comprise Mechatronics: mechanical engineering, electronic control and systems. The goal of this book is to collect state-of-the-art contributions that discuss recent developments which show a more coherent synergistic integration between the mentioned areas. The book is divided in three sections. The first section, divided into five chapters, deals with Automatic Control and Artificial Intelligence. The second section discusses Robotics and Vision with six chapters, and the third section considers Other Applications and Theory with two chapters.

Download or read book Machine Learning for Indoor Localization and Navigation written by Saideep Tiku and published by Springer Nature. This book was released on 2023-06-29 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: While GPS is the de-facto solution for outdoor positioning with a clear sky view, there is no prevailing technology for GPS-deprived areas, including dense city centers, urban canyons, buildings and other covered structures, and subterranean facilities such as underground mines, where GPS signals are severely attenuated or totally blocked. As an alternative to GPS for the outdoors, indoor localization using machine learning is an emerging embedded and Internet of Things (IoT) application domain that is poised to reinvent the way we navigate in various indoor environments. This book discusses advances in the applications of machine learning that enable the localization and navigation of humans, robots, and vehicles in GPS-deficient environments. The book explores key challenges in the domain, such as mobile device resource limitations, device heterogeneity, environmental uncertainties, wireless signal variations, and security vulnerabilities. Countering these challenges can improve the accuracy, reliability, predictability, and energy-efficiency of indoor localization and navigation. The book identifies severalnovel energy-efficient, real-time, and robust indoor localization techniques that utilize emerging deep machine learning and statistical techniques to address the challenges for indoor localization and navigation. In particular, the book: Provides comprehensive coverage of the application of machine learning to the domain of indoor localization; Presents techniques to adapt and optimize machine learning models for fast, energy-efficient indoor localization; Covers design and deployment of indoor localization frameworks on mobile, IoT, and embedded devices in real conditions.

Download or read book Information Technology for Balanced Manufacturing Systems written by Weiming Shen and published by Springer Science & Business Media. This book was released on 2006-09-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: BASYS conferences were initially organized to promote the development of balanced automation systems. The first BASYS conference was successfully launched in Victoria, Brazil, in 1995. BASYS'06 is the 7th edition in this series. This book comprises three invited keynote papers and forty-nine regular papers accepted for presentation at the conference. All together, these papers will make significant contributions to the literature of Intelligent Technology for Balanced Manufacturing Systems.

Download or read book Process Planning Optimization in Reconfigurable Manufacturing Systems written by Farayi Musharavati and published by Universal-Publishers. This book was released on 2010-09 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: To date, reconfigurable manufacturing systems (RMSs) are among the most effective manufacturing styles that can offer manufacturers an alternative way of facing up to the challenges of continual changes in production requirements within the global, competitive and dynamic manufacturing environments. However, availability of optimal process plans that are suitable for reconfigurable manufacturing is one of the key enablers - yet to be fully unlocked - for realizing the full benefits of true RMSs. To unlock the process planning key and advance the state of art of reconfigurable manufacturing in the manufacturing industry, a number of questions need to be answered: (i) what decision making models and (ii) what computational techniques, can be applied to provide optimal manufacturing process planning solutions that are suitable for logical reconfiguration in manufacturing systems? To answer these questions, you must understand how to model reconfigurable manufacturing activities in an optimization perspective. You must also understand how to develop and select appropriate optimization techniques for solving process planning problems in manufacturing systems. To this end, Process Planning Optimization in Reconfigurable Manufacturing Systems covers: the design and operation of RMSs, optimal process planning modelling for reconfigurable manufacturing and the design and implementation of heuristic algorithm design techniques. The author explores how to: model optimization problems, select suitable optimization techniques, develop optimization algorithms, comparatively analyze the performance of candidate metaheuristics and how to investigate the effects of optimal process planning solutions on operating levels in manufacturing systems. This book delineates five alternative heuristic algorithm design techniques based on simulated annealing, genetic algorithms and the boltzmann machine that are tasked to solve manufacturing process planning optimization problems in RMSs. After reading this book, you will understand: how a reconfigurable manufacturing system works, the different types of manufacturing optimization problems associated with reconfigurable manufacturing, as well as the conventional and intelligent techniques that are suitable for solving process planning optimization problems. You will also be able to develop and implement effective optimization procedures and algorithms for a wide spectrum of optimization problems in design and reconfigurable manufacturing."

Download or read book Methods and Applications for Advancing Distance Education Technologies International Issues and Solutions written by Syed, Mahbubur Rahman and published by IGI Global. This book was released on 2009-04-30 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides communication technologies, intelligent technologies, and quality educational pedagogy for advancing distance education for both teaching and learning.

Download or read book Advanced Flip Chip Packaging written by Ho-Ming Tong and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Flip Chip Packaging presents past, present and future advances and trends in areas such as substrate technology, material development, and assembly processes. Flip chip packaging is now in widespread use in computing, communications, consumer and automotive electronics, and the demand for flip chip technology is continuing to grow in order to meet the need for products that offer better performance, are smaller, and are environmentally sustainable.

Download or read book Advances in Embedded and Fan Out Wafer Level Packaging Technologies written by Beth Keser and published by John Wiley & Sons. This book was released on 2019-02-12 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the advantages of Embedded and FO-WLP technologies, potential application spaces, package structures available in the industry, process flows, and material challenges Embedded and fan-out wafer level packaging (FO-WLP) technologies have been developed across the industry over the past 15 years and have been in high volume manufacturing for nearly a decade. This book covers the advances that have been made in this new packaging technology and discusses the many benefits it provides to the electronic packaging industry and supply chain. It provides a compact overview of the major types of technologies offered in this field, on what is available, how it is processed, what is driving its development, and the pros and cons. Filled with contributions from some of the field's leading experts,Advances in Embedded and Fan-Out Wafer Level Packaging Technologies begins with a look at the history of the technology. It then goes on to examine the biggest technology and marketing trends. Other sections are dedicated to chip-first FO-WLP, chip-last FO-WLP, embedded die packaging, materials challenges, equipment challenges, and resulting technology fusions. Discusses specific company standards and their development results Content relates to practice as well as to contemporary and future challenges in electronics system integration and packaging Advances in Embedded and Fan-Out Wafer Level Packaging Technologies will appeal to microelectronic packaging engineers, managers, and decision makers working in OEMs, IDMs, IFMs, OSATs, silicon foundries, materials suppliers, equipment suppliers, and CAD tool suppliers. It is also an excellent book for professors and graduate students working in microelectronic packaging research.

Download or read book Advances in Wavelet Theory and Their Applications in Engineering Physics and Technology written by Dumitru Baleanu and published by BoD – Books on Demand. This book was released on 2012-04-04 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of the wavelet transform to analyze the behaviour of the complex systems from various fields started to be widely recognized and applied successfully during the last few decades. In this book some advances in wavelet theory and their applications in engineering, physics and technology are presented. The applications were carefully selected and grouped in five main sections - Signal Processing, Electrical Systems, Fault Diagnosis and Monitoring, Image Processing and Applications in Engineering. One of the key features of this book is that the wavelet concepts have been described from a point of view that is familiar to researchers from various branches of science and engineering. The content of the book is accessible to a large number of readers.