Download or read book Proceedings of 9th YSESM Youth Symposium on Experimental Solid Mechanics written by and published by Gruppo Italiano Frattura. This book was released on with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Trends in Biomedical Engineering and Bioimages Analysis written by Józef Korbicz and published by Springer Nature. This book was released on 2019-08-22 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers 30 papers presented at the 21st PCBBE, which was hosted by the University of Zielona Góra, Poland, and offered a valuable forum for exchanging ideas and presenting the latest developments in all areas of biomedical engineering. Biocybernetics and biomedical engineering are currently considered one of the most promising ways to improve health care and, consequently, the quality of life. Innovative technical solutions can better meet physicians’ needs and stimulate the development of medical diagnostics and therapy. We are currently witnessing a profound change in the role of medicine, which is becoming ubiquitous in everyday life thanks to technological advances. Further, the development of civilization manifests itself in efforts to unlock the secrets of the human body, and to mimic biological systems in engineering. The biannual Polish Conference on Biocybernetics and Biomedical Engineering (PCBBE) has been held for nearly four decades and has attracted scientists and professionals in the fields of engineering, medicine, physics, and computer science. Gathering the outcomes of this conference, the book introduces the reader to recent developments and achievements in biocybernetics and biomedical engineering.
Download or read book Imaging Methods for Novel Materials and Challenging Applications Volume 3 written by Helena Jin and published by Springer Science & Business Media. This book was released on 2012-09-23 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Imaging Methods for Novel Materials and Challenging Applications, Volume 3: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the third volume of seven from the Conference, brings together 62 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on: Role of optical interferometry in advancement of material characterization Three-dimensional imaging and volumetric correlation Digital holography and experimental mechanics Digital image correlation Metrology and displacement measurement at different scales Optical methods for dynamic tests Optical methods for and with MEMS and NEMS Thermomechanics and infrared imaging Imaging methods applied to biomaterials and soft materials Applied photoelasticity Optical measurement systems using polarized light Hybrid imaging techniques Contouring of surfaces Novel optical techniques
Download or read book Experimental Stress Analysis for Materials and Structures written by Alessandro Freddi and published by Springer. This book was released on 2015-03-19 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the main methods of experimental stress analysis and examines their application to various states of stress of major technical interest, highlighting aspects not always covered in the classic literature. It is explained how experimental stress analysis assists in the verification and completion of analytical and numerical models, the development of phenomenological theories, the measurement and control of system parameters under operating conditions, and identification of causes of failure or malfunction. Cases addressed include measurement of the state of stress in models, measurement of actual loads on structures, verification of stress states in circumstances of complex numerical modeling, assessment of stress-related material damage, and reliability analysis of artifacts (e.g. prostheses) that interact with biological systems. The book will serve graduate students and professionals as a valuable tool for finding solutions when analytical solutions do not exist.
Download or read book Frattura ed Integrit Strutturale Annals 2011 written by Francesco Iacoviello and published by Gruppo Italiano Frattura. This book was released on 2011-12-20 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Trends in Biomedical Engineering and Bioimages Analysis written by Józef Korbicz and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers 30 papers presented at the 21st PCBBE, which was hosted by the University of Zielona Góra, Poland, and offered a valuable forum for exchanging ideas and presenting the latest developments in all areas of biomedical engineering. Biocybernetics and biomedical engineering are currently considered one of the most promising ways to improve health care and, consequently, the quality of life. Innovative technical solutions can better meet physicians' needs and stimulate the development of medical diagnostics and therapy. We are currently witnessing a profound change in the role of medicine, which is becoming ubiquitous in everyday life thanks to technological advances. Further, the development of civilization manifests itself in efforts to unlock the secrets of the human body, and to mimic biological systems in engineering. The biannual Polish Conference on Biocybernetics and Biomedical Engineering (PCBBE) has been held for nearly four decades and has attracted scientists and professionals in the fields of engineering, medicine, physics, and computer science. Gathering the outcomes of this conference, the book introduces the reader to recent developments and achievements in biocybernetics and biomedical engineering.
Download or read book Computer Vision written by Linda G. Shapiro and published by Pearson. This book was released on 2001 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: For upper level courses in Computer Vision and Image Analysis.Provides necessary theory and examples for students and practitioners who will work in fields where significant information must be extracted automatically from images. Appropriate for those interested in multimedia, art and design, geographic information systems, and image databases, in addition to the traditional areas of automation, image science, medical imaging, remote sensing and computer cartography. The text provides a basic set of fundamental concepts and algorithms for analyzing images, and discusses some of the exciting evolving application areas of computer vision.
Download or read book Engine Tribology written by C.M. Taylor and published by Elsevier. This book was released on 1993-07-23 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Customer expectations and international competition are obliging car and commercial vehicle manufacturers to produce more efficient and cleaner products in shorter product cycle times. The consideration of Engine Tribology has a leading role to play in helping to achieve these goals. Specific areas of interdisciplinary interest include: design influences on fuel economy and emissions; new materials (ceramics, steels, coatings, lubricants, additives); low viscosity lubricants; and low heat rejection (adiabatic) engines.This volume gives a detailed and current review on some basic features of tribology particularly associated with internal combustion engines such as: lubrication analysis relevant to plain bearings, Hertzian contact theory and elastohydrodynamic lubrication associated with cams and followers and friction and wear in a general context. Several chapters examine engine bearings, valve trains, (cams and followers) and piston assemblies. For each machine element a background introduction is followed by design interpretations and a consideration of future developments. The important topic of materials, solids and lubricants is focused upon in the concluding chapters.The work will be of interest to engineers and researchers in the automobile, automotive products, petroleum and associated industries.
Download or read book Theory and Practice of Metal Electrodeposition written by Yuliy D. Gamburg and published by Springer Science & Business Media. This book was released on 2011-06-11 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors provide new insights into the theoretical and applied aspects of metal electrodeposition. The theory largely focuses on the electrochemistry of metals. Details on the practice discuss the selection and use of metal coatings, the technology of deposition of metals and alloys, including individual peculiarities, properties and structure of coatings, control and investigations. This book aims to acquaint advanced students and researchers with recent advances in electrodeposition while also being an excellent reference for the practical electrodeposition of metals and alloys.
Download or read book More than Moore written by Guo Qi Zhang and published by Springer Science & Business Media. This book was released on 2010-01-23 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decades, the mainstream of microelectronics progression was mainly powered by Moore's law focusing on IC miniaturization down to nano scale. However, there is a fast increasing need for "More than Moore" (MtM) products and technology that are based upon or derived from silicon technologies, but do not simply scale with Moore’s law. This book provides new vision, strategy and guidance for the future technology and business development of micro/nanoelectronics.
Download or read book Smart Actuation and Sensing Systems written by Giovanni Berselli and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the present book, which tries to summarize in an edited format and in a fairly comprehensive manner, many of the recent technical research accomplishments in the area of Smart Actuators and Smart Sensors, is to combine researchers and scientists from different fields into a single virtual room. The book hence reflects the multicultural nature of the field and will allow the reader to taste and appreciate different points of view, different engineering methods and different tools that must be jointly considered when designing and realizing smart actuation and sensing systems.
Download or read book Mechcomp2 written by Antonio J.M. Ferreira and published by Società Editrice Esculapio. This book was released on 2016-05-20 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites materials have aroused a great interest over the last few decades. Several applications of fibrous composites, functionally graded materials, laminated composites, nano-structured reinforcements, morphing structures, can be found in many engineering fields, such as aerospace, mechanical, naval and civil engineering. The necessity of lightweight structures, smart and adaptive systems, high-level strength, have led both the academic research and the manufacturing development to a recurring employment of these materials. Many journal papers and technical notes have been published extensively over the last seventy years in international scientific journals of different engineering fields. For this reason, the establishment of this second edition of Mechanics of Composites International Conference has appeared appropriate to continue what has been begun during the first edition occurred in 2014 at Stony Brook University (USA). MECHCOMP wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures. As a proof of this event, which has taken place in Porto (Portugal), selected plenary and key-note lectures have been collected in the present book.
Download or read book Composite Structures written by I.H. Marshall and published by Springer. This book was released on 1991-09-30 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained herein were presented at the Sixth International Conference on Composite Structures (ICCS/6) held at Paisley College, Scotland in September 1991. The Conference was organised and sponsored by Paisley College. It was co-sponsored by Scottish Enterprise, the National Engineering Laboratory, the US Army Research, Development and Standardisation Group-UK, Strathclyde Regional Council and Renfrew District Council. It forms a natural and ongoing progression from the highly successful ICCS/1/2/3/4 and 5 held at Paisley in 1981, 1983, 1985, 1987 and 1989 respectively. As we enter the final decade of this century many organisations throughout the world are adopting a prophetic role by attempting to forecast future scientific advances and their associated impact on mankind. Although some would argue that to do so is folly, without such futuristic visionaries the world would be that much poorer. IntelJigent speculation based on research trends and historical advances, rather than fanciful theories, breathes a healthy air of enthusiasm into the scientific community. Surely this is the very oxygen necessary to ignite the fir~s of innovation and invention amongst pioneers of research.
Download or read book Dynamic Deformation Damage and Fracture in Composite Materials and Structures written by Vadim Silberschmidt and published by Elsevier. This book was released on 2022-09-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, and in a broad range of application areas including aerospace, automotive, defense and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast and penetrative events, and has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. - Examines dynamic deformation and fracture of composite materials, covering experimental, analytical and numerical aspects - Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting - Addresses important application areas such as aerospace, automotive, wind energy, defense and sports
Download or read book Focus on Acoustic Emission Research written by Claudia Barile and published by . This book was released on 2017 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical and intermediate level handbook written to describe acoustic emission technique, focusing on the results obtained from different kinds of materials through an engineering point of view. Internal structural modifications of materials such as dislocation motion, plastic deformation, grain boundary sliding or crack propagation are connected to the production of acoustic waves. The possibility of detecting these low amplitude waves, which are known as acoustic emissions, in order to prevent failure represents an interesting and very promising approach that has been applied in several engineering fields. The possibility to monitor the whole history of materials without scanning and accessing from one side only is a great advantage connected with this method, especially if compared or even combined with other traditional techniques. "Focus on Acoustic Emission Research" offers the reader the information needed to understand the basic principle of the acoustic emission phenomenon and to provide updated information about results obtained for different kinds of materials and large-sized structures. Each chapter, written by invited experts, follows a focused and practical arrangement with subsections describing the measurement principle, the experimental procedures, the results and references. The reader of the book will benefit by the significant hands-on experience that each author transfers into their respective chapter. The volume illustrated provides, in fact, a practical approach to acoustic emission that makes this volume attractive to industrial experts, academic researchers and students.
Download or read book Digital Image Analysis written by S. Levialdi and published by Pitman Publishing. This book was released on 1984 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechcomp3 written by Antonio J.M. Ferreira and published by Società Editrice Esculapio. This book was released on 2017-05-25 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of composite materials has grown exponentially in the last decades and has affected many engineering fields due to their enhanced mechanical properties and improved features with respect to conventional materials. For instance, they are employed in civil engineering (seismic isolators, long-span bridges, vaults), mechanical engineering (turbines, machine components), aerospace and naval engineering (fuselages, boat hulls and sails), automotive engineering (car bodies, tires), and biomechanical engineering (prostheses).Nevertheless, the greater use of composites requires a rapid progress in gaining the needed knowledge to design and manufacture composite structures. Thus, researchers and designers devote their own efforts to develop new analysis techniques, design methodologies, manufacturing procedures, micromechanics approaches, theoretical models, and numerical methods. For these purpose, it is extremely easy to find many recent journal papers, books, and technical notes, focused on the mechanics of composites. In particular, several studies are presented to take advantage of their superior features by varying some typical structural parameters (such as geometry, fiber orientations, volume fraction, structural stiffness, weight, lamination scheme). Therefore, this Conference aims to collect contributions from every part of the globe that can increase the knowledge of composite materials and their applications, by engaging researches and professional engineers and designers from different sectors. The same aims and scopes have been reached by the previous editions of Mechanics of Composites International Conferences (MECHCOMP), which occurred in 2014 at Stony Brook University (USA) and in 2016 at University of Porto (Portugal).
