Download or read book Proceedings of the 9th International Conference on Magnet Technology Zurich Switzerland September 9 13 1985 written by C. Marinucci and published by Sin. This book was released on 1985 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-02 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 11th International Conference on Magnet Technology MT 11 written by T. Sekiguchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the years the aim of the International Conference on Magnet Technology has been the exchange of information on the design, construction and operation of magnets for a variety of applications, such as high energy physics, fusion, electrical machinery and others. The aim has included advances in materials for magnet conductors, insulators and supporting structures. Since its inception the focus of the International Conference on Magnet Technology has gradually shifted to superconducting magnets. Now almost all papers are related to superconductivity. The 11th International Conference on Magnet Technology (MT-11) was organized by the combined efforts of the Institute of Electrical Engineers of Japan, the Association for Promotion of Electrical, Electronic and Information Engineering, and the Tokyo Section of the IEEE. The Conference was held at the Tsukuba University Hall, Tsukuba, Japan, from 28 August to 1 September 1989, courtesy ofthe University ofTsukuba. The Tsukuba University Hall was large enough to host invited talks, parallel sessions, poster sessions and industrial exhibitions. 461 participants from 19 countries registered for MT-ll, and 280 invited and contributed papers were presented. The papers were reviewed not only by the Program Committee but also by foreign participants. Working sessions and social events were characterized by a truly international atmo sphere. Scientific as well as cultural excursions were organized so that foreign visitors could experience the spirit of modern Japan. 26 companies, of which 8 were from Western countries, participated in the industrial exhibition which featured diverse products and services of interest to the magnet community.
Download or read book Ordered and Turbulent Patterns in Taylor Couette Flow written by C. David Andereck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seldom does a physical system, particularly one as apparently simple as the flow of a Newtonian fluid between concentric rotating cylinders, retain the interest of scientists, applied mathematicians and engineers for very long. Yet, as this volume goes to press it has been nearly 70 years since G. I. Taylor's outstanding experimental and theoretical study of the linear stability of this flow was published, and a century since the first experiments were performed on rotating cylinder viscometers. Since then, the study of this system has progressed enormously, but new features of the flow patterns are still being uncovered. Interesting variations on the basic system abound. Connections with open flows are being made. More complex fluids are used in some experiments. The vigor of the research going on in this particular example of nonequilibrium systems was very apparent at the NATO Advanced Research Workshop on "Ordered and Turbulent Patterns in Taylor Couette Flow," held in Columbus, Ohio, USA May 22-24, 1991. A primary goal of this ARW was to bring together those interested in pattern formation in the classic Taylor Couette problem with those looking at variations on the basic system and with those interested in related systems, in order to better define the interesting areas for the future, the open questions, and the features common (and not common) to closed and open systems. This volume contains many of the contributions presented during the workshop.
Download or read book Superconducting Devices Materials written by and published by . This book was released on 1968 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Superconductivity written by Paul Seidel and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the details of many applications, is an essential reference for physicists and engineers in academic research as well as in industry. Readers looking for a comprehensive overview on basic effects related to superconductivity and superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors with respect to their application. Technology, preparation and characterization are covered for bulk, single crystals, thins fi lms as well as electronic devices, wires and tapes. The main benefit of this work lies in its broad coverage of significant applications in magnets, power engineering, electronics, sensors and quantum metrology. The reader will find information on superconducting magnets for diverse applications like particle physics, fusion research, medicine, and biomagnetism as well as materials processing. SQUIDs and their usage in medicine or geophysics are thoroughly covered, as are superconducting radiation and particle detectors, aspects on superconductor digital electronics, leading readers to quantum computing and new devices.
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration. Technical Information Center and published by . This book was released on 1976 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Miniature Joule Thomson Cryocooling written by Ben-Zion Maytal and published by Springer Science & Business Media. This book was released on 2012-09-18 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first in English being entirely dedicated to Miniature Joule-Thomson Cryocooling. The category of Joule-Thomson (JT) cryocoolers takes us back to the roots of cryogenics, in 1895, with figures like Linde and Hampson. The "cold finger" of these cryocoolers is compact, lacks moving parts, and sustains a large heat flux extraction at a steady temperature. Potentially, they cool down unbeatably fast. For example, cooling to below 100 K (minus 173 Celsius) might be accomplished within only a few seconds by liquefying argon. A level of about 120 K can be reached almost instantly with krypton. Indeed, the species of coolant plays a central role dictating the size, the intensity and the level of cryocooling. It is the JT effect that drives these cryocoolers and reflects the deviation of the "real" gas from the ideal gas properties. The nine chapters of the book are arranged in five parts. •The Common Principle of Cyrocoolers shared across the broad variety of cryocooler types •Theoretical Aspects: the JT effect and its inversion, cooling potential of coolants, the liquefaction process, sizing of heat exchangers, level of pressurization, discharge of pressure vessels • Practical Aspects: modes of operation (fast cooldown, continuous, multi-staging, hybrid cryocoolers), pressure sources, configuration, construction and technologies, flow adjustment, MEMS, open and closed cycle, cooldown process and similarity, transient behavior • Mixed Coolant cryocooling: theory, practice and applications • Special Topics: real gas choked flow rates, gas purity, clog formation, optimal fixed orifice, modeling, cryosurgical devices, warming by the inverse JT effect The theoretical aspects may be of interest not only to those working with cryocoolers but also for others with a general interest in "real" gas thermodynamics, such as, for example, the inversion of the JT effect in its differential and integral forms, and the exceptional behavior of the quantum gases. A detailed list of references for each chapter comprises a broad literature survey. It consists of more than 1,200 relevant publications and 450 related patents. The systematically organized content, arranged under a thorough hierarchy of headings, supported by 227 figures and 41 tables, and accompanied by various chronological notes of evolution, enables readers a friendly interaction with the book. Dr. Ben-Zion Maytal is a Senior Researcher at Rafael-Advanced Defense Systems, Ltd., and an Adjunct Senior Teaching Fellow at the Technion-Israel Institute of Technology, Haifa, Israel. Prof. John M. Pfotenhauer holds a joint appointment in the Departments of Mechanical Engineering and Engineering Physics at the University of Wisconsin - Madison.
Download or read book High Temperature Superconducting Magnetic Levitation written by Jia-Su Wang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors begin this book with a systematic overview of superconductivity, superconducting materials, magnetic levitation, and superconducting magnetic levitation - the prerequisites to understand the latter part of the book - that forms a solid foundation for further study in High Temperature Superconducting Magnetic Levitation (HTS Maglev). This book presents our research progress on HTS Maglev at Applied Superconductivity Laboratory (ASCLab) of Southwest Jiaotong University (SWJTU), China, with an emphasis on the findings that led to the world‘s first manned HTS Maglev test vehicle "Century". The book provides a detailed description on our previous work at ASCLab including the designing of the HTS Maglev test and measurement method as well as the apparatus, building "Century", developing the HTS Maglev numerical simulation system, and making new progress on HTS Maglev. The final parts of this book discuss research and prototyping efforts at ASCLab in several adjacent fi elds including HTS Maglev bearing, Flywheel Energy Storage System (FESS) and HTS maglev launch technology. We hope this book becomes a valuable source for researchers and engineers working in the fascinating field of HTS Maglev science and engineering. Contents Fundamentals of superconductivity Superconducting materials Magnetic levitation Superconducting magnetic levitation HTS Maglev experimental methods and set-up First manned HTS Maglev vehicle in the world Numerical simulations of HTS Maglev New progress of HTS Maglev vehicle HTS Maglev bearing and flywheel energy storage system HTS Maglev launch technology
Download or read book Field Computation for Accelerator Magnets written by Stephan Russenschuck and published by John Wiley & Sons. This book was released on 2011-02-08 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert on the electromagnetic design and engineering of superconducting accelerator magnets, this book offers the most comprehensive treatment of the subject to date. In concise and easy-to-read style, the author lays out both the mathematical basis for analytical and numerical field computation and their application to magnet design and manufacture. Of special interest is the presentation of a software-based design process that has been applied to the entire production cycle of accelerator magnets from the concept phase to field optimization, production follow-up, and hardware commissioning. Included topics: Technological challenges for the Large Hadron Collider at CERN Algebraic structures and vector fields Classical vector analysis Foundations of analytical field computation Fields and Potentials of line currents Harmonic fields The conceptual design of iron- and coil-dominated magnets Solenoids Complex analysis methods for magnet design Elementary beam optics and magnet polarities Numerical field calculation using finite- and boundary-elements Mesh generation Time transient effects in superconducting magnets, including superconductor magnetization and cable eddy-currents Quench simulation and magnet protection Mathematical optimization techniques using genetic and deterministic algorithms Practical experience from the electromagnetic design of the LHC magnets illustrates the analytical and numerical concepts, emphasizing the relevance of the presented methods to a great many applications in electrical engineering. The result is an indispensable guide for high-energy physicists, electrical engineers, materials scientists, applied mathematicians, and systems engineers.
Download or read book Alternative Energy Sources written by Jamal T. Manassah and published by Academic Press. This book was released on 2013-10-22 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Energy Sources, Part B contains the proceedings of the Alternative Energy Sources Symposium of the International Symposium Series of the Kuwait Foundation for the Advancement of Sciences, held in Kuwait in February 1980. The symposium provided a forum for discussing alternative energy sources and for reviewing and assessing those technologies that complement and will most likely replace oil and gas extracted by conventional techniques. Comprised of seven chapters, this book begins with an overview of the state of the art in nuclear fission power plants, along with the basics of nuclear fission and energy derived from nuclear reactions. The discussion then turns to fusion power and its prospects; the state of the art of energy storage systems used by electric utilities for peak shaving; and the outlook for transportation and energy through 2000. The next chapter focuses on the shortcomings of techniques that are typically used for the comparative evaluation of energy projects and suggests improvements, based on a present value approach, which allow for a more meaningful comparison. Mathematical techniques for the analysis of capital ventures are also described, with special reference to investments in the field of energy. The final chapter sets into context the mechanics of Third World development and the role of alternative energy systems in that process. This monograph will be of interest to researchers in the energy field as well as energy policymakers.
Download or read book Annual Report European Organization for Nuclear Research written by European Organization for Nuclear Research and published by . This book was released on 1986 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High energy physics written by United States. Congress. House. Committee on Science and Technology. Task Force on Science Policy and published by . This book was released on 1986 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetohydrodynamics written by and published by . This book was released on 1995 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
