Download or read book Probabilistic Analysis of Aircraft Gas Turbine Disk Life and Reliability written by and published by . This book was released on 1999 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Analysis of Aircraft Gas Turbine Disk Life and Reliability written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-16 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two series of low cycle fatigue (LCF) test data for two groups of different aircraft gas turbine engine compressor disk geometries were reanalyzed and compared using Weibull statistics. Both groups of disks were manufactured from titanium (Ti-6Al-4V) alloy. A NASA Glenn Research Center developed probabilistic computer code Probable Cause was used to predict disk life and reliability. A material-life factor A was determined for titanium (Ti-6Al-4V) alloy based upon fatigue disk data and successfully applied to predict the life of the disks as a function of speed. A comparison was made with the currently used life prediction method based upon crack growth rate. Applying an endurance limit to the computer code did not significantly affect the predicted lives under engine operating conditions. Failure location prediction correlates with those experimentally observed in the LCF tests. A reasonable correlation was obtained between the predicted disk lives using the Probable Cause code and a modified crack growth method for life prediction. Both methods slightly overpredict life for one disk group and significantly under predict it for the other.Melis, Matthew E. and Zaretsky, Erwin V. and August, RichardGlenn Research CenterAIRCRAFT ENGINES; GAS TURBINE ENGINES; PROBABILITY THEORY; RELIABILITY; FAILURE ANALYSIS; LIFE (DURABILITY); FATIGUE TESTS; WEIBULL DENSITY FUNCTIONS; PREDICTION ANALYSIS TECHNIQUES; STRESS ANALYSIS; THERMAL STRESSES; TEMPERATURE EFFECTS; RESIDUAL STRESS; CRACK PROPAGATION; COMPUTER PROGRAMS; ALUMINUM ALLOYS; TITANIUM ALLOYS; VANADIUM ALLOYS
Download or read book Probabilistic Analysis of Aircraft Gas Turbine Disk Life and Reliability written by Matthew E. Melis and published by . This book was released on 1999 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Aspects of Life Prediction written by W. Steven Johnson and published by ASTM International. This book was released on 2004 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: As fatigue and fracture mechanics approaches are used more often for determining the useful life and/or inspection intervals for complex structures, realization sets-in that all factors are not well known or characterized. Indeed, inherent scatter exists in initial material quality and in material performance. Furthermore, projections of component usage in determination of applied stresses are inexact at best and are subject to much discrepancy between projected and actual usage. Even the models for predicting life contain inherent sources of error based on assumptions and/or empirically fitted parameters. All of these factors need to be accounted for to determine a distribution of potential lives based on combination of the aforementioned variables, as well as other factors. The purpose of this symposium was to create a forum for assessment of the state-of-the-art in incorporating these uncertainties and inherent scatter into systematic probabilistic methods for conducting life assessment.
Download or read book Probabilistic Aspects of Life Prediction written by and published by ASTM International. This book was released on with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the First Symposium on Aviation Maintenance and Management Volume I written by Jinsong Wang and published by Springer Science & Business Media. This book was released on 2014-03-18 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the First Symposium on Aviation Maintenance and Management collects selected papers from the conference of ISAMM 2013 in China held in Xi’an on November 25-28, 2013. The book presents state-of-the-art studies on the aviation maintenance, test, fault diagnosis, and prognosis for the aircraft electronic and electrical systems. The selected works can help promote the development of the maintenance and test technology for the aircraft complex systems. Researchers and engineers in the fields of electrical engineering and aerospace engineering can benefit from the book. Jinsong Wang is a professor at School of Mechanical and Electronic Engineering of Northwestern Polytechnical University, China.
Download or read book A Collection of Technical Papers written by American Institute of Aeronautics and Astronautics and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1997 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents proceedings from the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and AIAA/ASME/AHS Adaptive Structures Forum.
Download or read book Engineering Design Reliability Handbook written by Efstratios Nikolaidis and published by CRC Press. This book was released on 2004-12-22 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers in the engineering industry and academia are making important advances on reliability-based design and modeling of uncertainty when data is limited. Non deterministic approaches have enabled industries to save billions by reducing design and warranty costs and by improving quality. Considering the lack of comprehensive and defini
Download or read book Stochastic Models in Reliability Engineering written by Lirong Cui and published by CRC Press. This book was released on 2020-07-29 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collective work by many leading scientists, analysts, mathematicians, and engineers who have been working at the front end of reliability science and engineering. The book covers conventional and contemporary topics in reliability science, all of which have seen extended research activities in recent years. The methods presented in this book are real-world examples that demonstrate improvements in essential reliability and availability for industrial equipment such as medical magnetic resonance imaging, power systems, traction drives for a search and rescue helicopter, and air conditioning systems. The book presents real case studies of redundant multi-state air conditioning systems for chemical laboratories and covers assessments of reliability and fault tolerance and availability calculations. Conventional and contemporary topics in reliability engineering are discussed, including degradation, networks, dynamic reliability, resilience, and multi-state systems, all of which are relatively new topics to the field. The book is aimed at engineers and scientists, as well as postgraduate students involved in reliability design, analysis, experiments, and applied probability and statistics.
Download or read book Fatigue Reliability of Gas Turbine Engine Structures written by and published by . This book was released on 1997 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Design Reliability Applications written by Efstratios Nikolaidis and published by CRC Press. This book was released on 2007-09-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the current, increasingly aggressive business environment, crucial decisions about product design often involve significant uncertainty. Highlighting the competitive advantage available from using risk-based reliability design, Engineering Design Reliability Applications: For the Aerospace, Automotive, and Ship Industries provides an overview of
Download or read book Probabilistic Analysis of Gas Turbine Field Performance written by and published by . This book was released on 2002 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Approaches Applied to Materials Development and Design Predictions written by Abílio M. P. De Jesus and published by MDPI. This book was released on 2020-03-25 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thematic issue on advanced simulation tools applied to materials development and design predictions gathers selected extended papers related to power generation systems, presented at the XIX International Colloquium on Mechanical Fatigue of Metals (ICMFM XIX), organized at University of Porto, Portugal, in 2018. In this issue, the limits of the current generation of materials are explored, which are continuously being reached according to the frontier of hostile environments, whether in the aerospace, nuclear, or petrochemistry industry, or in the design of gas turbines where efficiency of energy production and transformation demands increased temperatures and pressures. Thus, advanced methods and applications for theoretical, numerical, and experimental contributions that address these issues on failure mechanism modeling and simulation of materials are covered. As the Guest Editors, we would like to thank all the authors who submitted papers to this Special Issue. All the papers published were peer-reviewed by experts in the field whose comments helped to improve the quality of the edition. We also would like to thank the Editorial Board of Materials for their assistance in managing this Special Issue.
Download or read book A Collection of Technical Papers written by and published by . This book was released on 1997 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Reliability Risk and Life Cycle Performance of Structures and Infrastructures written by George Deodatis and published by CRC Press. This book was released on 2014-02-10 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures contains the plenary lectures and papers presented at the 11th International Conference on STRUCTURAL SAFETY AND RELIABILITY (ICOSSAR2013, New York, NY, USA, 16-20 June 2013), and covers major aspects of safety, reliability, risk and life-cycle performance of str
Download or read book Advances in Reliability and Maintainability Methods and Engineering Applications written by Yu Liu and published by Springer Nature. This book was released on 2023-07-04 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book brings together the latest developments in reliability and maintainability methods from leading research groups globally. Covering a diverse range of subject areas, from mechanical systems to cyber-physical systems, the book offers both theoretical advancements and practical applications in various industries. With a focus on reliability modelling, reliability analysis, reliability design, maintenance optimization, warranty policy, prognostics and health management, this book appeals to academic and industrial professionals in the field of reliability engineering and beyond. It features real-world case studies from turbofan engines bearings, industrial robots, wireless networks, aircraft actuation systems, and more. This book is ideal for engineers, scientists, and graduate students in reliability, maintainability, design optimization, prognostics and health management, and applied probability and statistics.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:
