Download or read book Physical Chemistry of Metallurgical Processes written by M. Shamsuddin and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various metallurgical topics, viz. roasting of sulfide minerals, matte smelting, slag, reduction of oxides and reduction smelting, interfacial phenomena, steelmaking, secondary steelmaking, role of halides in extraction of metals, refining, hydrometallurgy and electrometallurgy. Each chapter is illustrated with appropriate examples of applications of the technique in extraction of some common, reactive, rare or refractory metal together with worked out problems explaining the principle of the operation.
Download or read book Chemical Metallurgy written by Chiranjib Kumar Gupta and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical metallurgy is a well founded and fascinating branch of the wide field of metallurgy. This book provides detailed information on both the first steps of separation of desirable minerals and the subsequent mineral processing operations. The complex chemical processes of extracting various elements through hydrometallurgical, pyrometallurgical or electrometallurgical operations are explained. In the choice of material for this work, the author made good use of the synergy of scientific principles and industrial practices, offering the much needed and hitherto unavailable combination of detailed treatises on both compiled in one book.
Download or read book Physical Metallurgy written by Gregory N. Haidemenopoulos and published by CRC Press. This book was released on 2018-02-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical metallurgy is one of the main fields of metallurgical science dealing with the development of the microstructure of metals in order to achieve desirable properties required in technological applications. Physical Metallurgy: Principles and Design focuses on the processing–structure–properties triangle as it applies to metals and alloys. It introduces the fundamental principles of physical metallurgy and the design methodologies for alloys and processing. The first part of the book discusses the structure and change of structure through phase transformations. The latter part of the books deals with plastic deformation, strengthening mechanisms, and mechanical properties as they relate to structure. The book also includes a chapter on physical metallurgy of steels and concludes by discussing the computational tools, involving computational thermodynamics and kinetics, to perform alloy and process design.
Download or read book Principles of Physical and Chemical Metallurgy written by Giles F. Carter and published by . This book was released on with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy Principles written by Robert E. Reed-Hill and published by Van Nostrand Reinhold Company. This book was released on 1973 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers all aspects of physical metallurgy and behavior of metals and alloys. * Presents the principles on which metallurgy is based. * Concepts such as heat affected zone and structure-property relationships are covered. * Principles of casting are clearly outlined in the chapter on solidification. * Advanced treatment on physical metallurgy provides specialized information on metals.
Download or read book Solutions to the Problems in Principles of Physical and Chemical Metallurgy written by Giles F. Carter and published by . This book was released on 1982 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Extractive Metallurgy written by Terkel Rosenqvist and published by Tapir Academic Press. This book was released on 2004 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rather than simply describing the processes and reactions involved in metal extraction, this book concentrates on fundamental principles to give readers an understanding of the possibilities for future developments in this field. It includes a review of the basics of thermodynamics, kinetics and engineering principles that have special importance for extractive metallurgy, to ensure that readers have the background necessary for maximum achievement. The various metallurgical unit processes (such as roasting, reduction, smelting and electrolysis) are illustrated by existing techniques for the extraction of the most common metals. Each chapter includes a bibliography of recommended reading, to aid in further study. The appendices include tables and graphs of thermodynamic qualities for most substances of metallurgical importance; these are ideal for calculating heat (enthalpy) balances and chemical equilibrium constants. SI Units are used consistently throughout the text.
Download or read book An Introduction to Chemical Metallurgy written by R. H. Parker and published by Elsevier. This book was released on 2016-04-19 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Chemical Metallurgy, Second Edition introduces the reader to chemical metallurgy, including its fundamental principles and some of their applications. References in the text to a date and the author of some law or principle of physical chemistry are given for the sake of historical significance. This book is comprised of eight chapters and opens with an overview of thermodynamics, with particular emphasis on the first law of thermodynamics; the expansion of a gas; thermodynamically reversible changes; applications of thermochemistry in metallurgy; and experimental techniques in calorimetry. The following chapters focus on entropy, free energy, and chemical equilibrium; solutions and reaction kinetics; extraction and refining of metals, including refining by preferential oxidation; and corrosion and electrodeposition. Electrochemistry and interfacial phenomena are also explored, along with surface energy and surface tension, electrolytes and electrolysis, and reduction and oxidation potentials. This monograph is written primarily for chemists and metallurgists as well as students embarking on courses in chemical metallurgy.
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.
Download or read book The Principles of Physical Metallurgy written by GILBERT E. DOAN and published by . This book was released on 1953 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Extractive Metallurgy written by Ahindra Ghosh and published by New Age International. This book was released on 1991 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Attempts To Present A Comprehensive View Of Extractive Metallurgy, Especially Principles Of Extractive Metallurgy In A Concise Form. This Is The First Book In This Area Which Attempts To Do It. It Has Been Written In Textbook Style. It Presents The Various Concepts Step By Step, Shows Their Importance, Deals With Elementary Quantitative Formulations, And Illustrates Through Quantitative And Qualitative Informations. The Approach Is Such That Even Undergraduate Students Would Be Able To Follow The Topics Without Much Difficulty And Without Much Of A Background In Specialized Subjects. This Is Considered To Be A Very Useful Approach In This Area Of Technology. Moreover The Inter-Disciplinary Nature Of The Subject Has Been Duely Brought Out.While Teaching Concerned Course(S) In The Undergraduate And Postgraduate Level The Authors Felt The Need Of Such A Book. The Authors Found The Books Available On The Subject Did Not Fulfill The Requirements. No Other Book Was Concerned With All Relevant Concepts. Most Of Them Laid Emphasis Either On Thermodynamic Aspects Or On Discussing Unit Processes. Transport Phenomena Are Dealt With In Entirely Different Books. Reactor Concepts Were Again Lying In Chemical Engineering Texts. The Authors Tried To Harmonize And Synthesize The Concepts In Elementary Terms For Metallurgists.The Present Book Contains A Brief Descriptive Summary Of Some Important Metallurgical Unit Processes. Subsequently It Discusses Not Only Physical Chemistry Of Metallurgical Reactions And Processes But Also Rate Phenomena Including Heat And Mass Transfer, Fluid Flow, Mass And Energy Balance, And Elements Of Reactor Engineering. A Variety Of Scientific And Engineering Aspects Of Unit Processes Have Been Discussed With Stress On The Basic Principles All Throughout. There Is An Attempt To Introduce, As Much As Possible, Quantitative Treatments And Engineering Estimates. The Latter May Often Be Approximate From The Point Of View Of Theory But Yields Results That Are Very Valuable To Both Practicing Metallurgists As Well As Others.
Download or read book Extractive Metallurgy 1 written by Alain Vignes and published by John Wiley & Sons. This book was released on 2013-03-28 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the processes of mineral transformation, recycling and reclamation of metals, for the purpose of turning metals and alloys into a liquid state ready for pouring. Even though "process metallurgy" is one of the oldest technologies implemented by man, technological innovation, with the development of processes that are both focused on product quality and economically and ecologically efficient, continues to be at the heart of these industries. This book explains the physico-chemical bases of transformations, vital to their understanding and control (optimization of operational conditions), and the foundations in terms of "process engineering" (heat and matter assessment, process coupling: chemical reactions and transport phenomena), vital to the optimal execution and analysis of transformation process operations. This book is addressed to students in the field of metallurgy and to engineers facing the problem of metal and alloy development (operation of an industrial unit or development of a new process).
Download or read book PHYSICAL METALLURGY PRINCIPLES AND PRACTICE Third Edition written by RAGHAVAN, V. and published by PHI Learning Pvt. Ltd.. This book was released on 2015-11-10 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-established book, now in its Third Edition, presents the principles and applications of engineering metals and alloys in a highly readable form. This new edition retains all the basic topics covered in earlier editions such as phase diagrams, phase transformations, heat treatment of steels and nonferrous alloys, shape memory alloys, solidification, fatigue, fracture and corrosion, as well as applications of engineering alloys. A new chapter on ‘Nanomaterials’ has been added (Chapter 8). The field of nano-materials is interdisciplinary in nature, covering many disciplines including physical metallurgy. Intended as a text for undergraduate courses in Metallurgical and Materials Engineering, the book is also suitable for students preparing for associate membership examination of the Indian Institute of Metals (AMIIM) and other professional examinations like AMIE.
Download or read book Chemical Metallurgy written by J. J. Moore and published by Elsevier. This book was released on 2013-10-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Metallurgy provides an understanding of the fundamental chemical principles and demonstrates the application of these principles to process metallurgy and corrosion protection. The book discusses the fundamental chemical principles involved in metallurgical reactions. Since it is felt that the understanding of quantitative thermodynamics and its application to process metallurgy often prove to be a major problem area for students, example calculations and exercises are included at the end of each section in Chapter 2. The final three chapters deal with the applications of the chemical principles to the extraction and refining of metals, metal melting and recycling, and metallic corrosion. The book is intended as an introductory text for metallurgy students studying for first degrees, TEC higher diplomas and certificates, and Graduateship of the Institution of Metallurgists. It should also be of use to scientists and engineers entering employment in the metallurgical and metal finishing industries or the teaching profession.
Download or read book Chemical Hydrometallurgy written by Alfred Richard Burkin and published by World Scientific. This book was released on 2001 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the undergraduate and MSc courses in hydrometallurgy which Professor A R Burkin gave from 1961 until he retired in 1988. It is divided into two sections. The first deals with the fundamental chemical and physical principles on which the technology is based. In the second, processes which are used for the production of individual metals are described, in terms of those principles where appropriate.
Download or read book Metallurgy Principles and Processes written by Chloe Raines and published by . This book was released on 2019-06-14 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy is the process of separation of metals from their ores. It is also an academic field which analyzes the properties of metallic elements, inter-metallic compounds and alloys. The extraction of metals requires the processing of ores through various processes. Accordingly, this field can be categorized into physical and chemical metallurgy. Depending on the materials produced, metallurgy branches into ferrous and non-ferrous metallurgy. Various techniques of plating, metalworking, thermal spraying, shot peening and heat treatment are crucial in metallurgy. This textbook provides comprehensive insights into the principles and processes in the field of metallurgy. It presents this complex subject in the most comprehensible and easy to understand language. This book is an essential guide for both academicians and those who wish to pursue this discipline further.
Download or read book Advanced Physical Chemistry for Process Metallurgy written by Nobuo Sano and published by . This book was released on 1997 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last three decades, there have been dramatic changes in the steel industry in terms of the quality of products, processing technology, energy efficiency, labor productivity and environmental protection. The once prominent role of the metals industry in national economies is declining in industrialized countries to the point where fewer research engineers are employed in the industry. The scope of this book is limited to selected topics within the field of Physical Chemistry of Iron and Steelmaking"that are relevant to reduction, refining and solidification steps in the steel industry. The authors, leaders in the field, have gathered the complex information regarding metallurgy in this collection to enable the next generation to take this branch of science, and the metals industry, to new heights. Graduate students and research engineers will find this book particularly useful, while practicing engineers, innovators and managers in technology developmentwill read and consult this book for inspiration and reference.
