Download or read book Principles of Abrasive Water Jet Machining written by Andreas W. Momber and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive water jet machining was introduced to manufacturing ten years ago and has been increasingly used for treating hard-to-machine and multi-layered materials and as an alternative tool for milling, turning, drilling and polishing. This is the first comprehensive review of the technique, dealing with a broad range of issues including mixing and acceleration processes, material removal mechanisms, process optimization and fluid mechanics. Explanations are given as the book follows the development of an abrasive water jet machining process, from tool generation through to machining results, supervision and control. This methodical journey through the field is marked by drawings, graphs and tables, many of which are being published here for the first time. Though the book is written at an academic level, it focuses very much on practical applications, which reflects the authors' extensive involvement with both laboratory research and industrial practices.
Download or read book Principles of Abrasive Water Jet Machining written by Andreas W. Momber and published by Springer. This book was released on 2012-02-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive water jet machining was introduced to manufacturing ten years ago and has been increasingly used for treating hard-to-machine and multi-layered materials and as an alternative tool for milling, turning, drilling and polishing. This is the first comprehensive review of the technique, dealing with a broad range of issues including mixing and acceleration processes, material removal mechanisms, process optimization and fluid mechanics. Explanations are given as the book follows the development of an abrasive water jet machining process, from tool generation through to machining results, supervision and control. This methodical journey through the field is marked by drawings, graphs and tables, many of which are being published here for the first time. Though the book is written at an academic level, it focuses very much on practical applications, which reflects the authors' extensive involvement with both laboratory research and industrial practices.
Download or read book Smart Technologies for Energy Environment and Sustainable Development written by Mohan Lal Kolhe and published by Springer. This book was released on 2019-07-02 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Smart Technologies for Energy, Environment, and Sustainable Development (ICSTEESD 2018). The chapters are broadly divided into three focus areas, viz. energy, environment, and sustainable development, and discusses the relevance and applications of smart technologies in these fields. A wide variety of topics such as renewable energy, energy conservation and management, energy policy and planning, environmental management, marine environment, green building, smart cities, smart transportation are covered in this book. Researchers and professionals from varied engineering backgrounds contribute chapters with an aim to provide economically viable solutions to sustainable development challenges. The book will prove useful for academics, professionals, and policy makers interested in sustainable development.
Download or read book Hybrid Machining written by Xichun Luo and published by Academic Press. This book was released on 2018-06-27 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Machining: Theory, Methods, and Case Studies covers the scientific fundamentals, techniques, applications and real-world descriptions of emerging hybrid machining technology. This field is advancing rapidly in industrial and academic contexts, creating a great need for the fundamental and technical guidance that this book provides. The book includes discussions of basic concepts, process design principles, standard hybrid machining processes, multi-scale modeling approaches, design, on-machine metrology and work handling systems. Readers interested in manufacturing systems, product design or machining technology will find this one-stop guide to hybrid machining the ideal reference. - Includes tables of recommended processing parameters for key engineering materials/products for each hybrid machining process - Provides case studies covering real industrial applications - Explains how to use multiscale modeling for hybrid machining
Download or read book Nontraditional Manufacturing Processes written by Gary F. Benedict and published by CRC Press. This book was released on 2017-10-19 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a convenient, single source of information on advanced machining, material forming, and joining processes. It describes available technologies that use tools, such as high velocity material jets, pulsed magnetic fields, light beams, electrochemical reactions, and more. Organized by type of process (mechanical, chemical, electrochemical, and thermal), the book discusses 31 important nontraditional processes and covers each process’s principles, equipment, capabilities, and operating parameters. The author includes a list of nontraditional manufacturing firms, nearly 250 figures that clearly illustrate the technologies, and numerous bibliographic citations for additional reading.
Download or read book Jet Cutting Technology written by A. Lichtarowicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the 11th International Conference on Jet Cutting Technology, held at St. Andrews, Scotland, on 8-10 September 1992. Jetting techniques have been successfully applied for many years in the field of cleaning and descaling. Today, however, jet cutting is used in operations as diverse as removing cancerous growths from the human body, decommissioning sunsea installations and disabling explosive munitions. The diversity is reflected in the papers presented at the conference. The papers were divided into several main sections: jetting basics -- materials; jetting basics -- fluid mechanics; mining and quarrying; civil engineering; new developments; petrochem; cleaning and surface treatment; and manufacturing. The high quality of papers presented at the conference has further reinforced its position as the premier event in the field. The volume will be of interest to researchers, developers and manufacturers of systems, equipment users and contractors.
Download or read book Advanced Machining Processes written by Prof. Vijay Kumar Jain and published by Allied Publishers. This book was released on 2009 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Abrasive Technology written by Anna Rudawska and published by BoD – Books on Demand. This book was released on 2018-10-24 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter of this book is the information on the abrasive technology methods, the characteristics of the methods (for example, the technological parameters, tools, and machines), innovative methods, characteristics of surface structure and surface properties after this type of mechanical process, and application in various industrial branches and other technical and technological domains. Abrasive technology is very important, for example, in precision component manufacturing and nano-technology devices. The aim of this book is to present information on the characteristics and applications of abrasive technology, abrasive tools, tests, and also the innovative methods of this technology. This information enables scientists, engineers, and designers to ensure the soundness and integrity of the fabricated components and to develop new techniques effectively.
Download or read book Collimated Abrasive Water jet Behavior written by David E. Swanson and published by . This book was released on 1989 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Machining Technology written by Bijoy Bhattacharyya and published by Academic Press. This book was released on 2019-09-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Machining Technology: Advanced, Hybrid, Micro Machining and Super Finishing Technology explores complex and precise components with challenging shapes that are increasing in demand in industry. As the first book to cover all major technologies in this field, readers will find the latest technical developments and research in one place, allowing for easy comparison of specifications. Technologies covered include mechanical, thermal, chemical, micro and hybrid machining processes, as well as the latest advanced finishing technologies. Each topic is accompanied by a basic overview, examples of typical applications and studies of performance criteria. In addition, readers will find comparative advantages, model questions and solutions. - Addresses a broad range of modern machining techniques, providing specifications for easy comparison - Includes descriptions of the main applications for each method, along with the materials or products needed - Provides the very latest research in processes, including hybrid machining
Download or read book Principles of Modern Grinding Technology written by W. Brian Rowe and published by William Andrew. This book was released on 2013-11-11 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Modern Grinding Technology, Second Edition, provides insights into modern grinding technology based on the author's 40 years of research and experience in the field. It provides a concise treatment of the principles involved and shows how grinding precision and quality of results can be improved and costs reduced. Every aspect of the grinding process--techniques, machines and machine design, process control, and productivity optimization aspects--come under the searchlight. The new edition is an extensive revision and expansion of the first edition covering all the latest developments, including center-less grinding and ultra-precision grinding. Analyses of factors that influence grinding behavior are provided and applications are presented assisted by numerical examples for illustration. The new edition of this well-proven reference is an indispensible source for technicians, engineers, researchers, teachers, and students who are involved with grinding processes. - Well-proven source revised and expanded by undisputed authority in the field of grinding processes - Coverage of the latest developments, such as ultra-precision grinding machine developments and trends in high-speed grinding - Numerically worked examples give scale to essential process parameters - The book as a whole and in particular the treatment of center-less grinding is considered to be unchallenged by other books
Download or read book Abrasive Water Jet Machining of Engineering Materials written by Jagadish and published by Springer Nature. This book was released on 2019-11-25 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents insights in green techniques used in conventional and advanced machining. It consists of various experimental case studies conducted by the authors on green machining of difficult-to-machine materials, polymer and ceramic materials. Effects of green techniques / processes on machining properties like material removal rate, surface quality, geometric accuracy, productivity, and environment while machining various materials are reported.
Download or read book Introduction to Advanced Machining and Finishing Processes written by Golam Kibria and published by . This book was released on 2019-04-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on applications of non-conventional machining processes for advanced machining as well as advanced surface finishing. This book will be invaluable to engineering postgraduate and undergraduate students, practising engineers, and researchers in manufacturing or production discipline.
Download or read book 7 Principles of Transformational Leadership written by Hugh Blane and published by Red Wheel/Weiser. This book was released on 2017-05-23 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to flourish as a leader so that a mindset of growth, optimism, and positivity spreads to your employees and shows up in the customer experience. In the world of work, the single greatest asset of successful individuals, teams, and organizations is their mindset—what happens in between their ears. It’s not the corporate strategy, the sales compensation plan, or the market segments they’re pursuing. It is what each leader, team member, and employee chooses to focus on, believe, and create for themselves and others. 7 Principles of Transformational Leadership presents the fundamental concepts whose implementation will result in dramatic revenue, performance, and relationship growth. Specifically, leaders will learn to: Live their professional and personal lives with unbridled purpose and passion. Execute strategic priorities more effectively and with accelerated results. Retain the brightest and best talent. Have employees, key stakeholders, and managers enthusiastically follow them. Be exemplars of innovation, growth, and positive mindsets. Cascade excellence throughout their organizations. You may have employees with all the talent in the world, but you’ll never achieve remarkable results until you change your employees’ mindset. 7 Principles of Transformational Leadership will help you convert your human potential into accelerated business results.
Download or read book Nonconventional Machining written by P. K. Mishra and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text contains 12 chapters. Each chapter describes: process; operational summary; application; and principles of operation. Each chapter contains its separate list of questions, bibliography and list of figures. It may be of value for students at engineering colleges.
Download or read book Socio Inspired Optimization Methods for Advanced Manufacturing Processes written by Apoorva Shastri and published by Springer Nature. This book was released on 2020-08-11 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses comprehensively the advanced manufacturing processes, including illustrative examples of the processes, mathematical modeling, and the need to optimize associated parameter problems. In addition, it describes in detail the cohort intelligence methodology and its variants along with illustrations, to help readers gain a better understanding of the framework. The theoretical and statistical rigor is validated by comparing the solutions with evolutionary algorithms, simulation annealing, response surface methodology, the firefly algorithm, and experimental work. Lastly, the book critically reviews several socio-inspired optimization methods.
Download or read book Water Jet Applications in Construction Engineering written by Andreas W. Momber and published by CRC Press. This book was released on 1998-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a complete review of field experiences collected over the 1990s, covering the background of the subject, principles and equipment used. Divided into twenty-five chapters, all aspects of water jets are considered including their many applications and safe use.
