Download or read book Pressuremeter Testing written by R. J. Mair and published by Elsevier. This book was released on 2013-10-22 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.
Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
Download or read book The Pressuremeter and Its New Avenues written by Gerard Ballivy and published by CRC Press. This book was released on 1995-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter testing activities are of great interest for scientists and engineers concerned with the mechanical behaviour of civil engineering materials. The proceedings include the first Menard Lecture presented by Professor Branko Ladanyi and 57 technical papers from 16 countries. They are related to the application of pressuremeter testing to granular and alluvial soils, clay, rock, concrete and permafrost, and geotechnical design. It also includes a session on technological developments in the design, fabrication and installation of pressuremeters.
Download or read book The Pressuremeter and Its Marine Applications written by J.-L. Briaud and published by ASTM International. This book was released on 1986 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressuremeters written by British Geotechnical Society and published by Thomas Telford. This book was released on 1990 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology, data interpretation and applications of pressure meters have progressed rapidly. Covering the design and construction of pressure meters, this text also discusses their uses, including developments in the field.
Download or read book Pressuremeters in Geotechnical Design written by B.G. Clarke and published by CRC Press. This book was released on 1994-10-20 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of pressuremeters in predicting in situ soil properties is increasing as the technique becomes established as a reliable method of site investigation. This book provides a thorough review of the topic and its use in site investigation.
Download or read book In Situ Testing Methods in Geotechnical Engineering written by Alan J. Lutenegger and published by CRC Press. This book was released on 2021-05-03 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Situ Testing Methods in Geotechnical Engineering covers the field of applied geotechnical engineering related to the use of in situ testing of soils to determine soil properties and parameters for geotechnical design. It provides an overview of the practical aspects of the most routine and common test methods, as well as test methods that engineers may wish to include on specific projects. It is suited for a graduate-level course on field testing of soils and will also aid practicing engineers. Test procedures for determining in situ lateral stress, strength, and stiffness properties of soils are examined, as is the determination of stress history and rate of consolidation. Readers will be introduced to various approaches to geotechnical design of shallow and deep foundations using in situ tests. Importantly, the text discusses the potential advantages and disadvantages of using in situ tests.
Download or read book Finite Element Analysis in Geotechnical Engineering written by David M Potts and published by Thomas Telford. This book was released on 2001 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: An insight into the use of the finite method in geotechnical engineering. The first volume covers the theory and the second volume covers the applications of the subject. The work examines popular constitutive models, numerical techniques and case studies.
Download or read book Predictive Soil Mechanics written by Peter Wroth and published by Thomas Telford. This book was released on 1993 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the 49 papers which form the proceedings of the Wroth Memorial Symposium. The themes of the symposium were soil properties and their measurement, especially means of in-situ tests, prediction and performance, and design methods.
Download or read book Cone Penetration Testing in Geotechnical Practice written by T. Lunne and published by CRC Press. This book was released on 2002-09-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on the specification, performance, use and interpretation of the Electric Cone Penetration Test (CPU), and in particular the Cone Penetration Test with pore pressure measurement (CPTU) commonly referred to as the "piezocone test".
Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
Download or read book In Situ Tests in Geotechnical Engineering written by Jacques Monnet and published by John Wiley & Sons. This book was released on 2015-12-07 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-situ tests that are performed in geotechnics to identify and characterize the soil. These measurements are then used to size the Civil Engineering works This book is intended for engineers, students and geotechnical researchers. It provides useful information for use and optimal use of in-situ tests to achieve a better book adaptation of civil engineering on the ground
Download or read book High Resolution Pressuremeters and Geotechnical Engineering written by John Hughes and published by CRC Press. This book was released on 2022-10-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Resolution Pressuremeters and Geotechnical Engineering focuses on pressuremeters with internal transducers that allow measurement of strength, stiffness and in situ reference stress. It outlines the principles and the basics of the technology, gives guidance on good practice and making reliable analysis, provides case studies, and compares the pressuremeter test with similar ones from other devices to enable engineers to make informed choices. A unique, up-to-date guide to high resolution pressuremeters with internal transducers Contextualises analyses and advice to enable an informed choice of testing processes Presents analyses previously unpublished in book form This practical guide will suit professionals at the consultancy level, pressuremeter practitioners and site investigation companies.
Download or read book Geotechnical Engineering written by Ken K. S. Ho and published by CRC Press. This book was released on 2001 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Site Investigation Practice written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1996 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the international conference on advances in site investigation practice held in 1995 provide vital information for all professionals involved in the planning, execution, interpretation and applications of site investigations. It draws together the research and experience of many of the most eminent professional engineers and academics, presenting a substantial body of knowledge.
Download or read book Cavity Expansion Methods in Geomechanics written by Hai-Sui Yu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavity expansion theory is a simple theory that has found many applications in geotechnical engineering. In particular, it has been used widely to analyse problems relating to deep foundations, in-situ testing, underground excavation and tunnelling, and wellbore instability. Although much research has been carried out in this field, all the major findings are reported in the form of reports and articles published in technical journals and conference proceedings. To facilitate applications and further development of cavity expansion theory, there is a need for the geotechnical community to have a single volume presentation of cavity expansion theory and its applications in solid and rock mechanics. This book is the first attempt to summarize and present, in one volume, the major developments achieved to date in the field of cavity expansion theory and its applications in geomechanics. Audience: Although it is intended primarily as a reference book for civil, mining, and petroleum engineers who are interested in cavity expansion methods, the solutions presented in the book will also be of interest to students and researchers in the fields of applied mechanics and mechanical engineering.
Download or read book Design of Axially Loaded Piles European Practice written by F. De Cock and published by CRC Press. This book was released on 2020-12-17 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique on the subject because it is not so much a collection of individual work, but basically comprising national reports from most European countries on the present-day design methods, as prescribed in more or less strict national codes or recommendations and so daily used in practice by consulting engineers and contractors. As far as already implemented, the application of these methods within the framework of Eurocode 7 is described as well. In order to improve the understanding of the design methods, the national papers also consider aspects such as the local piling practice, limitations of the design methods, some practical examples and particular national experiences. The proceedings also include the contributions of two invited speakers as well as those of the three session discussion leaders, focusing on some particular aspects with regards to pile design. The book is of particular interest for those who are involved with pile design in practice, consulting engineers, piling contractors, control organisms as well as those dealing with geotechnical normalisation and research work.
