Download or read book Pressure impulse Diagrams Using Finite Element Analysis for Reinforced Concrete Columns Subjected to Blast Loading written by Rasekh Rahim Zadeh and published by . This book was released on 2011 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete is one of the prime building materials widely used to construct protective structures. One of the purposes of this project is to study the non-linear response of reinforced concrete structures when subjected to impact and blast loading. The study is conducted at two levels: material level and structural level. At the material level, the strength enhancement of three material models of LS-DYNA subjected to high strain rates is studied. The effects of strain rate and lateral inertial confinement on the strength enhancement are investigated. Recommendations are made to improve the accuracy of the results of future numerical simulations for reinforced concrete structures subjected to loads having high strain rates. At the structural level, Pressure-Impulse diagrams for reinforced concrete columns that have four configurations of transverse reinforcement are developed. Finite element modeling in LS-DYNA is used to analyze the structures and calculate the damage level for each blast event. The developed Pressure-Impulse diagrams are used to study the effect of confinement on the reduction of damage level at impulsive, dynamic, and quasi-static loading conditions.
Download or read book Pressure impulse Diagrams Using Finite Element Analysis for Reinforced Concrete Slabs Subjected to Blast Loading written by Jitesh Kumar Reddy Nalagotla and published by . This book was released on 2013 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete slab systems are widely used in protective structures designed to resist blast events. Blast events subject structures to high pressure and impulse loads. The magnitude of blast load experienced by a structural element is directly related to the exposed area. Hence protection of reinforced concrete slabs and walls, which constitute the maximum exposed area of a structure when subjected to blast loads, is of great importance. The main purpose of the project is to study the non-linear response of reinforced concrete slabs when subjected to impact and blast loading. Blast loading comprises of impulsive, dynamic and quasi-static loading conditions. And the performance of reinforced concrete slabs subjected to these loads is highly dependent upon the reinforcing steel provided in the slab. Hence a comprehensive analysis is performed on a representative slab panel with varying reinforcement. Due to the nature of the blast loading analysis method used influences the slab response significantly. Hence the slab response was predicted and compared using finite element (FE) and single degree of freedom (SDOF) methods. An advanced finite element modeling tool, LSDYNA and a commonly used SDOF analysis tool, SBEDS are employed for the purpose of analysis. A parametric analysis is conducted to develop Pressure-Impulse (PI) curves for different damage levels. Curve fit analysis was performed to characterize the PI curves generated from FE method. Conclusions and future work recommendations are presented for design of reinforced concrete slabs for blast protection based upon the research are presented and discussed.abstract.
Download or read book Design Against Blast written by S. Syngellakis and published by WIT Press. This book was released on 2013 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terrorist attacks and other destructive incidents caused by explosives have, in recent years, prompted considerable research and development into the protection of structures against blast loads. For this objective to be achieved, experiments have been performed and theoretical studies carried out to improve our assessments of the intensity as well as the space-time distribution of the resulting blast pressure on the one hand and the consequences of an explosion to the exposed environment on the other.This book aims to enhance awareness on and understanding of these topical issues through a collection of relevant, Transactions of the Wessex Institute of Technology articles written by experts in the field. The book starts with an overview of key physics-based algorithms for blast and fragment environment characterisation, structural response analyses and structural assessments with reference to a terrorist attack in an urban environment and the management of its inherent uncertainties.A subsequent group of articles is concerned with the accurate definition of blast pressure, which is an essential prerequisite to the reliable assessment of the consequences of an explosion. Other papers are concerned with alternative methods for the determination of blast pressure, based on experimental measurements or neural networks. A final group of articles reports investigations on predicting the response of specific structural entities and their contents.The book concludes with studies on the effectiveness of steel-reinforced polymer in improving the performance of reinforced concrete columns and the failure mechanisms of seamless steel pipes used in nuclear industry.
Download or read book Concrete Structures Subjected to Impact and Blast Loadings and Their Combinations written by Chunwei Zhang and published by CRC Press. This book was released on 2022-05-08 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although much research focuses on investigating the responses of reinforced concrete (RC) structures under sole impact or blast loads, the responses of RC structures under a combination of impact and blast loads currently represent a gap in our knowledge. The combined actions of impact and blast loadings may be applied to RC structures during accidental or intentional collision of vessels, vehicles, etc., carrying explosive materials. A comprehensive study on the vulnerability of various structural members is carried out using finite element (FE) simulations under combination of impact and blast loads with the variations of various loading- and structural-related parameters and key parameters. This book introduces various structural analysis approaches for concrete structures when subjected to extreme loads such as impact and blast loadings. The theory of the combinations of impact and blast loads is proposed that can provide primary insights to the specific readers to develop new ideas in impact and blast engineering, including combined actions of extreme loads arising from real-world intentional or accidental events. This book will be of value to students (undergraduate or postgraduate), engineers, and researchers in structural and civil engineering, and specifically, those who are studying and investigating the performances of concrete structures under extreme loads.
Download or read book Analysis and Response Mechanisms of Blast loaded Reinforced Concrete Columns written by George Daniel Williams (II.) and published by . This book was released on 2009 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terrorism has been an international threat to high occupancy civilian structures, government buildings, and military installations for many years. Statistical data from past terrorist attacks show that transportation infrastructure has been widely targeted, and a bombing of an ordinary highway bridge is a realistic scenario. Recent threats to bridges in the U.S. confirm this concern and have caught the attention of the bridge engineering community. Given that many ordinary highway bridges in the United States support critical emergency evacuation routes, military transportation plans, and vital economic corridors, the loss of a key bridge could result in severe national security, economic, and socioeconomic consequences. Therefore, in this research, a simplified procedure is developed to predict blast loads on bridge columns, and an understanding of the mechanisms that cause damage and ultimately failure of blast-loaded reinforced concrete bridge columns is advanced. To that end, computational fluid dynamics models are constructed and validated using experimental data. These numerical models are used to characterize the structural loads experienced by square and circular bridge columns subjected to blast loads, which is followed by the formulation of a simplified load prediction procedure. Additionally, nonlinear, three-dimensional, dynamic finite element models of blast-loaded reinforced concrete bridge columns are developed and validated using qualitative and quantitative data from recent experimental tests. The results of these analyses illustrate the fact that circular columns cannot be assumed to experience less base shear demand than a square column simply because they experience less net resultant impulse. Furthermore, the column response models developed in this research are used to identify and explain the mechanisms that lead to the spalling of side cover concrete off blast-loaded reinforced concrete members observed in recent experimental tests. Therefore, the results of this research advance the understanding of the structural loads on and the resulting response of reinforced concrete bridge columns subjected to blast loads, and as such these contributions to the structural engineering community enhance the security of the U.S. transportation infrastructure.
Download or read book Structures to Resist the Effects of Accidental Explosions written by and published by . This book was released on 1991 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Protection of Buildings written by American Society of Civil Engineers and published by . This book was released on 2023-03-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 59-22 provides minimum requirements for planning, design, construction, and assessment of new and existing buildings subject to the effects of accidental or malicious explosions.
Download or read book Modern Protective Structures written by Theodor Krauthammer and published by CRC Press. This book was released on 2008-02-01 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's world, reasonably predictable military operations have been replaced by low intensity conflicts-less predictable terrorist activities carried out by determined individuals or small groups that possess a wide range of backgrounds and capabilities. Because of the threats posed by this evolving type of warfare, civil engineers and emergency
Download or read book Innovations in Impact and Blast Protections written by Yonghui Wang and published by Springer Nature. This book was released on 2022-08-23 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops several novel foam-filled structures and steel-concrete-steel (SCS) sandwich structures, which provides more alternatives for ensuring the safety of buildings and infrastructures under extreme loading, like impact and blast. In the first part of this book, the aluminium foam- and polyurethane foam-filled structures have been developed for dissipating impact and blast energy. Experimental and numerical studies have been conducted to obtain their behaviours under impact loading. In addition, analytical models have also been proposed to assess their energy absorption performances and facilitate the impact and blast design when using the proposed foam-filled structures. In the second part of this book, SCS sandwich structures with novel shear connectors have been developed and their behaviours under impact and blast loading have been experimentally, numerically and analytical studied. Analytical models for predicting the impact and blast responses of SCS sandwich structures have also been developed. In the third part of this book, a new steel-polyurethane foam-steel-concrete-steel (SPUFSCS) panel (i.e. the combination of foam material and SCS panel) has been developed to achieve a higher impact resistant capacity. Owing to the increasing impact and blast threats on buildings and infrastructures, the studies presented in this book are of significant importance for providing several new solutions for impact and blast enhancement.
Download or read book Proceedings of 17th Symposium on Earthquake Engineering Vol 3 written by Manish Shrikhande and published by Springer Nature. This book was released on 2023-07-03 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 17th Symposium on Earthquake Engineering organized by the Department of Earthquake Engineering, Indian Institute of Technology Roorkee. The topics covered in the proceedings include engineering seismology and seismotectonics, earthquake hazard assessment, seismic microzonation and urban planning, dynamic properties of soils and ground response, ground improvement techniques for seismic hazards, computational soil dynamics, dynamic soil–structure interaction, codal provisions on earthquake-resistant design, seismic evaluation and retrofitting of structures, earthquake disaster mitigation and management, and many more. This book also discusses relevant issues related to earthquakes, such as human response and socioeconomic matters, post-earthquake rehabilitation, earthquake engineering education, public awareness, participation and enforcement of building safety laws, and earthquake prediction and early warning system. This book is a valuable reference for researchers and professionals working in the area of earthquake engineering.
Download or read book Blast and Ballistic Loading of Structures written by John Hetherington and published by CRC Press. This book was released on 2014-04-21 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together, in a concise format, the key elements of the loads produced from explosive sources, and how they interact with structures. Explosive sources include gas, high explosives, dust and nuclear materials.It presents quantitative information and design methods in a useable form without recourse to extensive mathematical ana
Download or read book Advanced Modelling Techniques in Structural Design written by Feng Fu and published by John Wiley & Sons. This book was released on 2015-04-07 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful design and construction of iconic new buildings relies on a range of advanced technologies, in particular on advanced modelling techniques. In response to the increasingly complex buildings demanded by clients and architects, structural engineers have developed a range of sophisticated modelling software to carry out the necessary structural analysis and design work. Advanced Modelling Techniques in Structural Design introduces numerical analysis methods to both students and design practitioners. It illustrates the modelling techniques used to solve structural design problems, covering most of the issues that an engineer might face, including lateral stability design of tall buildings; earthquake; progressive collapse; fire, blast and vibration analysis; non-linear geometric analysis and buckling analysis . Resolution of these design problems are demonstrated using a range of prestigious projects around the world, including the Buji Khalifa; Willis Towers; Taipei 101; the Gherkin; Millennium Bridge; Millau viaduct and the Forth Bridge, illustrating the practical steps required to begin a modelling exercise and showing how to select appropriate software tools to address specific design problems.
Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
Download or read book From Materials to Structures Advancement through Innovation written by Bijan Samali and published by CRC Press. This book was released on 2012-11-26 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Materials to Structures: Advancement through Innovation is a collection of peer-reviewed papers presented at the 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22) held in Sydney Australia, from 11-14 December 2012 by academics, researchers and practising engineers mainly from Australasia and the Asia-Pacific r
Download or read book Highway Bridge under Collision and Explosion written by Hao Wu and published by Springer Nature. This book was released on with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Design for Physical Security written by Task Committee on Structural Design for Physical Security and published by ASCE Publications. This book was released on 1999-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Task Committee on Structural Design for Physical Security of the Structural Engineering Institute of ASCE. This report provides guidance to structural engineers in the design of civil structures to resist the effects of terrorist bombings. As dramatized by the bombings of the World Trade Center in New York City and the Murrah Building in Oklahoma City, civil engineers today need guidance on designing structures to resist hostile acts. The U.S. military services and foreign embassy facilities developed requirements for their unique needs, but these the documents are restricted. Thus, no widely available document exists to provide engineers with the technical data necessary to design civil structures for enhanced physical security. The unrestricted government information included in this report is assembled collectively for the first time and rephrased for application to civilian facilities. Topics include: determination of the threat, methods by which structural loadings are derived for the determined threat, the behavior and selection of structural systems, the design of structural components, the design of security doors, the design of utility openings, and the retrofitting of existing structures. This report transfers this technology to the civil sector and provides complete methods, guidance, and references for structural engineers challenged with a physical security problem.
Download or read book Blast Effects on Buildings written by David Cormie and published by Thomas Telford Publishing. This book was released on 2009 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflects developments in the field of blast engineering since the early 1990s. Combining coverage of the design standards, codes and materials with an appreciation of the needs and demands of the designer, this book provides the engineer with a comprehensive source of reference for the main elements of blast engineering design in modern practice.
