Download or read book Innovations and Breakthroughs in the Gold and Silver Industries written by Vaikuntam Iyer Lakshmanan and published by Springer Nature. This book was released on 2019-12-14 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes all aspects of technical innovation related to the gold and silver industries, from ore identification through to processing. It includes details of comminution, pre-concentration and beneficiation, commercially available and recently developed innovative pyro and hydrometallurgical processes, including leaching processes, separation and purification, and recovery and refining. The book focuses on capital and operating cost estimation, process simulation, waste remediation and minimization. Sustainable gold and silver processes are examined with the use of clean technologies and efficient use of energy and water. Topics such as supply and demand of gold and silver, their exchange in major global markets, and the factors that influence gold and silver prices and major economic indices are discussed. Presents emerging trends and innovations in the areas of ore body knowledge, mining, processing, waste management, economics, finance and automation; Describes emerging enablers for the gold and silver industries such as digitization, automation and remote operations; Promotes breakthroughs in mining, processing, waste management, energy and water from an integrated operations perspective.
Download or read book Directory of Published Proceedings written by and published by . This book was released on 1982 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CIM Bulletin written by Canadian Institute of Mining and Metallurgy and published by . This book was released on 1989 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Skillings Mining Review written by and published by . This book was released on 1990 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mineral Processing Design and Operation written by Ashok Gupta and published by Elsevier. This book was released on 2006-06-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Processing Design and Operations is expected to be of use to the design engineers engaged in the design and operation of mineral processing plants and including those process engineers who are engaged in flow-sheets development.Provides an orthodox statistical approach that helps in the understanding of the designing of unit processes. The subject of mineral processing has been treated on the basis of unit processes that are subsequently developed and integrated to form a complete strategy for mineral beneficiation. Unit processes of crushing, grinding, solid–liquid separation, flotation are therefore described in some detail so that a student at graduate level and operators at plants will find this book useful. Mineral Processing Design and Operations describes the strategy of mathematical modeling as a tool for more effective controlling of operations, looking at both steady state and dynamic state models.* Containing 18 chapters that have several worked out examples to clarify process operations* Filling a gap in the market by providing up-to-date research on mineral processing* Describes alternative approaches to design calculation, using example calculations and problem exercises
Download or read book Mining Engineering written by and published by . This book was released on 1966 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mineralogy in the Mining Industry written by W. Petruk and published by Elsevier. This book was released on 2000-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of performing applied mineralogy investigations, and applications and capabilities of recently developed instruments for measuring mineral properties are explored in this book intended for practicing applied mineralogists, students in mineralogy and metallurgy, and mineral processing engineers. The benefits of applied mineralogy are presented by using in-depth applied mineralogy studies on base metal ores, gold ores, porphyry copper ores, iron ores and industrial minerals as examples. The chapter on base metal ores includes a discussion on the effects of liberation, particle sizes and surfaces coatings of Pb, Cu, Fe, Ca and So4- on the recoveries of sphalerite, galena and chalcopyrite. The chapter on gold discusses various methods of determining the quantities of gold in different minerals, including 'invisible' gold in pyrite and arsenopyrite, so that a balance of the distribution of gold among the minerals can be calculated. This book also discusses the roles of pyrite, oxygen, moisture and bacterial (thiobacillus ferrooxidans) on reactions that produce acidic drainage from tailings piles, and summarizes currently used and proposed methods of remediation of acidic drainage.
Download or read book Ocean Science on Station written by and published by . This book was released on 1973 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geological Survey Professional Papers written by and published by . This book was released on 1902 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Critical Mineral Resources of the United States written by K. J. Schulz and published by Geological Survey. This book was released on 2017 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the importance and dependence of specific mineral commodities increase, so does concern about their supply. The United States is currently 100 percent reliant on foreign sources for 20 mineral commodities and imports the majority of its supply of more than 50 mineral commodities. Mineral commodities that have important uses and face potential supply disruption are critical to American economic and national security. However, a mineral commodity's importance and the nature of its supply chain can change with time; a mineral commodity that may not have been considered critical 25 years ago may be critical today, and one considered critical today may not be so in the future. The U.S. Geological Survey has produced this volume to describe a select group of mineral commodities currently critical to our economy and security. For each mineral commodity covered, the authors provide a comprehensive look at (1) the commodity's use; (2) the geology and global distribution of the mineral deposit types that account for the present and possible future supply of the commodity; (3) the current status of production, reserves, and resources in the United States and globally; and (4) environmental considerations related to the commodity's production from different types of mineral deposits. The volume describes U.S. critical mineral resources in a global context, for no country can be self-sufficient for all its mineral commodity needs, and the United States will always rely on global mineral commodity supply chains. This volume provides the scientific understanding of critical mineral resources required for informed decisionmaking by those responsible for ensuring that the United States has a secure and sustainable supply of mineral commodities.
Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.
Download or read book The Environment Index written by and published by . This book was released on 1984 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Critical Metals Handbook written by Gus Gunn and published by John Wiley & Sons. This book was released on 2014-01-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind is using a greater variety of metals in greater quantities than ever before. As a result there is increasing global concern over the long-term availability of secure and adequate supplies of the metals needed by society. Critical metals, which are those of growing economic importance that might be susceptible to future scarcity, are a particular worry. For many of these we have little information on how they are concentrated in the Earth’s crust, how to extract them from their ores, and how to use, recycle and dispose of them effectively and safely. Published with the British Geological Survey, the Critical Metals Handbook brings together a wealth of knowledge on critical metals and provides a foundation for improving the future security and sustainability of critical metal supplies. Written by international experts, it provides a unique source of authoritative information on diverse aspects of the critical metals, including geology, deposits, processing, applications, recycling, environmental issues and markets. It is aimed at a broad non-specialist audience, including professionals and academics working in the exploration and mining sectors, in mining finance and investment, and in mineral processing and manufacturing. It will also be a valuable reference for policy makers concerned with resource management, land-use planning, eco-efficiency, recycling and related fields.
Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.
Download or read book Process Mineralogy written by Megan Becker and published by . This book was released on 2016-12-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uranium Extraction Technology written by International Atomic Energy Agency and published by . This book was released on 1993 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this publication is to update and expand the first edition, which was published in 1983, and to report on later advances in uranium ore processing. It includes background information about the principles of the unit operations used in uranium ore processing and summarizes the current state of the art. Extensive references provide sources for specific technological details.
Download or read book Wills Mineral Processing Technology written by Barry A. Wills and published by Elsevier. This book was released on 2011-04-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wills' Mineral Processing Technology provides practising engineers and students of mineral processing, metallurgy and mining with a review of all of the common ore-processing techniques utilized in modern processing installations. Now in its Seventh Edition, this renowned book is a standard reference for the mineral processing industry. Chapters deal with each of the major processing techniques, and coverage includes the latest technical developments in the processing of increasingly complex refractory ores, new equipment and process routes. This new edition has been prepared by the prestigious J K Minerals Research Centre of Australia, which contributes its world-class expertise and ensures that this will continue to be the book of choice for professionals and students in this field.This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. The work is fully indexed and referenced. - The classic mineral processing text, revised and updated by a prestigious new team - Provides a clear exposition of the principles and practice of mineral processing, with examples taken from practice - Covers the latest technological developments and highlights the challenges facing the mineral processor - New sections on environmental problems, improving the efficiency of existing processes and dealing with waste.
