Download or read book Preparation and Characterization of Materials written by J Honig and published by Elsevier. This book was released on 2012-12-02 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preparation and Characterization of Materials brings together the proceedings of the Indo-U.S. Workshop on the Preparation and Characterization of Materials, held on February 19-23, 1981, at the Indian Institute of Science in Bangalore, India. The papers focus on advances and developments in the preparation and characterization of materials such as ferroics, layered materials, metal oxides and other electronic materials, amorphous materials including glasses, and high-temperature ceramics. This book is comprised of 25 chapters and begins with a discussion on crystal growth and other preparation techniques, touching on topics such as solid state synthesis of complex oxides and preparation of soft ferrites. The application of neutron scattering techniques and analytical electron microscopy to materials research and materials science is then considered, along with the dielectric and electro-optic applications of ferroics and the preparation and characterization of synthetic layered inorganic ion exchangers. Subsequent chapters deal with metal oxides and other electronic materials; glasses and other amorphous materials; and high-temperature ceramics such as silicon nitride. This monograph will be of interest to materials scientists and engineers as well as students and researchers in materials science.
Download or read book Preparation and Characterization of Materials written by Jurgen M. Honig and published by . This book was released on 1981 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal growth and other preparation techniques; Selected characterization techniques; Ferroics; Layered materials and surface treatment; Metal oxides and other electronic materials; Amorphous materials including glasses; High temperature ceramics.
Download or read book Molecular Materials written by Sanjay Malhotra and published by CRC Press. This book was released on 2017-05-12 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of molecular materials research looks at the preparation and characterization of potentially useful materials with enhanced physical, chemical, and biomedical properties. Molecular Materials: Preparation, Characterization, and Applications discusses the cutting-edge interdisciplinary research in the area of advanced molecular-based materials. This book explores multiple aspects of molecular materials, including their synthesis and characterization, and gives information on their application in various fields.
Download or read book Molecular Materials written by Sanjay Malhotra and published by CRC Press. This book was released on 2017-05-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of molecular materials research looks at the preparation and characterization of potentially useful materials with enhanced physical, chemical, and biomedical properties. Molecular Materials: Preparation, Characterization, and Applications discusses the cutting-edge interdisciplinary research in the area of advanced molecular-based materials. This book explores multiple aspects of molecular materials, including their synthesis and characterization, and gives information on their application in various fields.
Download or read book Modules Systems and Applications in Thermoelectrics written by David Michael Rowe and published by CRC Press. This book was released on 2012-04-25 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising two volumes, Thermoelectrics and Its Energy Harvesting reviews the dramatic improvements in technology and application of thermoelectric energy with a specific intention to reduce and reuse waste heat and improve novel techniques for the efficient acquisition and use of energy. This volume, Modules, Systems and Applications in Thermoelectrics, discusses the practical, novel, and truly groundbreaking applications of thermoelectrics in a range of markets. The book details the U.S. interest in alternative energy and energy harvesting, specifically, the current efforts to use thermoelectric generators (TGs) to reduce emissions. Internationally, it expounds on the strong interest in Japan, Korea and Europe to incorporate TGs in cars to reduce fuel consumption and meet EU carbon dioxide emission targets; the European plans to build an isotopic powered thermoelectric generator; and India’s use of TG s in converting hot water from steel mills into electricity.
Download or read book Characterization of Materials written by Elton N. Kaufmann and published by John Wiley & Sons. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A thoroughly updated and expanded new edition, this work features a logical, detailed, and self-contained coverage of the latest materials characterization techniques. Reflecting the enormous progress in the field since the last edition, this book details a variety of new powerful and accessible tools, improvements in methods arising from new instrumentation and approaches to sample preparation, and characterization techniques for new types of materials, such as nanomaterials. Researchers in materials science and related fields will be able to identify and apply the most appropriate method in their work"--
Download or read book Handbook of Materials Characterization written by Surender Kumar Sharma and published by Springer. This book was released on 2018-09-18 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the widely used experimental techniques available for the structural, morphological, and spectroscopic characterization of materials. Recent developments in a wide range of experimental techniques and their application to the quantification of materials properties are an essential side of this book. Moreover, it provides concise but thorough coverage of the practical and theoretical aspects of the analytical techniques used to characterize a wide variety of functional nanomaterials. The book provides an overview of widely used characterization techniques for a broad audience: from beginners and graduate students, to advanced specialists in both academia and industry.
Download or read book Chemical Analysis and Material Characterization by Spectrophotometry written by Bhim Prasad Kaflé and published by Elsevier. This book was released on 2019-11-29 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Analysis and Material Characterization by Spectrophotometry integrates and presents the latest known information and examples from the most up-to-date literature on the use of this method for chemical analysis or materials characterization. Accessible to various levels of expertise, everyone from students, to practicing analytical and industrial chemists, the book covers both the fundamentals of spectrophotometry and instrumental procedures for quantitative analysis with spectrophotometric techniques. It contains a wealth of examples and focuses on the latest research, such as the investigation of optical properties of nanomaterials and thin solid films. Covers the basic analytical theory that is essential for understanding spectrophotometry Emphasizes minor/trace chemical component analysis Includes the spectrophotometric analysis of nanomaterials and thin solid films Thoroughly describes methods and uses easy-to-follow, practical examples and experiments
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Materials Preparation and Characterization written by PENNSYLVANIA STATE UNIV UNIVERSITY PARK MATERIALS RESEARCH LAB. and published by . This book was released on 1971 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report brings together reports on the research of faculty affiliated with the Materials Research Laboratory at the Pennsylvania State University. It includes, but is not limited to, the research supported by the Advanced Research Projects Agency. The report brings together under new headings the interrelated work conducted by faculty members with backgrounds in a variety of disciplines. In addition it singles out certain classes of materials receiving special attention as follows: Preparation of materials; Characterization of materials; Properties of materials; Noncrystalline solids including glasses; Solid state geoscience and biosciences. The report also includes a description of the extensive efforts of the laboratory under the heading of 'Science and Technology Transfer, ' and finally appends a bibliography of papers published during the last twelve months, reprints of which are available upon request. (Author).
Download or read book Materials Preparation and Characterization in Thermoelectrics written by David Michael Rowe and published by CRC Press. This book was released on 2012-04-25 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes updated theoretical considerations which provide an insight into avenues of research most likely to result in further improvements in material performance. It details the latest techniques for the preparation of thermoelectric materials employed in energy harvesting, together with advances in the thermoelectric characterisation of nanoscale material. The book reviews the use of neutron beams to investigate phonons, whose behaviour govern the lattice thermal conductivity and includes a chapter on patents.
Download or read book Molecular Materials written by Sanjay Malhotra and published by CRC Press. This book was released on 2016-03-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of molecular research looks at the preparation and characterization of potentially useful molecular materials with enhanced electronic and biomedical properties. The book discusses the cutting-edge interdisciplinary research in the area of chemistry, surface science, and materials. The book gives information on the application of materials in various fields such as solid state, electronics, energy, environment, communication, agriculture, bio-materials, fine chemicals and pharmaceuticals. The book focuses on the latest developments in the application of materials science in daily life.
Download or read book Microstructural Characterization of Materials written by David Brandon and published by John Wiley & Sons. This book was released on 2013-03-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.
Download or read book Materials Characterization Techniques written by Sam Zhang and published by CRC Press. This book was released on 2008-12-22 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts must be able to analyze and distinguish all materials, or combinations of materials, in use today-whether they be metals, ceramics, polymers, semiconductors, or composites. To understand a material's structure, how that structure determines its properties, and how that material will subsequently work in technological applications, researche
Download or read book Synthesis and Characterization of Advanced Materials written by Michael A. Serio and published by . This book was released on 1998 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers by leading experts look at current methods for synthesizing new materials. The methods presented include chemical vapor deposition synthesis, solution synthesis, pyrolysis and combustion synthesis, and polymer synthesis. Featuring in-depth coverage of ceramic materials, the volume also discusses group III nitrides, fullerenes, and ferroelectrics.
Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.
Download or read book Characterization of Biomaterials written by Susmita Bose and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief introductory chapter provides a broad overview of materials, biomaterials and the need to understand different techniques to characterize biomaterials. From this chapter, the reader can gain a perspective on how the rest of the topics in different chapters are divided to fully comprehend this inherently multidisciplinary field. Application of appropriate characterization tools can not only save time to fully evaluate different biomaterials, it can also make commercial biomedical devices safer. In the long run, safer biomedical devices can only reduce the pain and suffering of mankind, a dream that resonates with every biomedical researcher.
