Download or read book Predictive Maintenance of Pumps Using Condition Monitoring written by Raymond S Beebe and published by Elsevier. This book was released on 2004-04-16 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how condition monitoring can be applied to detect internal degradation in pumps so that appropriate maintenance can be decided upon based on actual condition rather than arbitrary time scales. The book focuses on the main condition monitoring techniques particularly relevant to pumps (vibration analysis, performance analysis). The philosophy of condition monitoring is briefly summarised and field examples show how condition monitoring is applied to detect internal degration in pumps.* The first book devoted to condition monitoring and predictive maintenance in pumps. * Explains how to minimise energy costs, limit overhauls and reduce maintenance expenditure.* Includes material not found anywhere else.

Download or read book Explaining Anomaly Detections for Condition Monitoring and Predictive Maintenance of Pumps Drives and Other Equipment written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Machinery Vibration Analysis and Predictive Maintenance written by Cornelius Scheffer and published by Elsevier. This book was released on 2004-07-16 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinery Vibration Analysis and Predictive Maintenance provides a detailed examination of the detection, location and diagnosis of faults in rotating and reciprocating machinery using vibration analysis. The basics and underlying physics of vibration signals are first examined. The acquisition and processing of signals is then reviewed followed by a discussion of machinery fault diagnosis using vibration analysis. Hereafter the important issue of rectifying faults that have been identified using vibration analysis is covered. The book also covers the other techniques of predictive maintenance such as oil and particle analysis, ultrasound and infrared thermography. The latest approaches and equipment used together with the latest techniques in vibration analysis emerging from current research are also highlighted. - Understand the basics of vibration measurement - Apply vibration analysis for different machinery faults - Diagnose machinery-related problems with vibration analysis techniques

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book Mechanical Vibrations and Condition Monitoring written by Juan Carlos A. Jauregui Correa and published by Academic Press. This book was released on 2020-03-18 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations and Condition Monitoring presents a collection of data and insights on the study of mechanical vibrations for the predictive maintenance of machinery. Seven chapters cover the foundations of mechanical vibrations, spectrum analysis, instruments, causes and effects of vibration, alignment and balancing methods, practical cases, and guidelines for the implementation of a predictive maintenance program. Readers will be able to use the book to make predictive maintenance decisions based on vibration analysis. This title will be useful to senior engineers and technicians looking for practical solutions to predictive maintenance problems. However, the book will also be useful to technicians looking to ground maintenance observations and decisions in the vibratory behavior of machine components. Presents data and insights into mechanical vibrations in condition monitoring and the predictive maintenance of industrial machinery Defines the key concepts related to mechanical vibration and its application for predicting mechanical failure Describes the dynamic behavior of most important mechanical components found in industrial machinery Explains fundamental concepts such as signal analysis and the Fourier transform necessary to understand mechanical vibration Provides analysis of most sources of failure in mechanical systems, affording an introduction to more complex signal analysis

Download or read book Temporal Abstractions for Condition Monitoring and Predictive Maintenance of Pumps Drives and Other Equipment written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Damages on Pumps and Systems written by Thomas Merkle and published by Elsevier. This book was released on 2014-06-04 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage on Pumps and Systems. The Handbook for the Operation of Centrifugal Pumps offers a combination of the theoretical basics and practical experience for the operation of circulation pumps in the engineering industry. Centrifugal pumps and systems are extremely vulnerable to damage from a variety of causes, but the resulting breakdown can be prevented by ensuring that these pumps and systems are operated properly. This book provides a total overview of operating centrifugal pumps, including condition monitoring, preventive maintenance, life cycle costs, energy savings and economic aspects. Extra emphasis is given to the potential damage to these pumps and systems, and what can be done to prevent breakdown. - Addresses specific issues about pumping of metal chips, sand, abrasive dust and other solids in fluids - Emphasis on economic and efficiency aspects of predictive maintenance and condition monitoring - Uses life cycle costs (LCC) to evaluate and calculate the costs of pumping systems

Download or read book Machinery Condition Monitoring written by Amiya Ranjan Mohanty and published by CRC Press. This book was released on 2014-12-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the Fault in the Machines Drawing on the author’s more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, and rotating machines in particular. A Single-Source Solution for Practice Machinery Conditioning Monitoring Since vibration is one of the most widely used fault detection techniques, the book offers an assessment of vibration analysis and rotor-dynamics. It also covers the techniques of wear and debris analysis, and motor current signature analysis to detect faults in rotating mechanical systems as well as thermography, the nondestructive test NDT techniques (ultrasonics and radiography), and additional methods. The author includes relevant case studies from his own experience spanning over the past 20 years, and detailing practical fault diagnosis exercises involving various industries ranging from steel and cement plants to gas turbine driven frigates. While mathematics is kept to a minimum, he also provides worked examples and MATLAB® codes. This book contains 15 chapters and provides topical information that includes: A brief overview of the maintenance techniques Fundamentals of machinery vibration and rotor dynamics Basics of signal processing and instrumentation, which are essential for monitoring the health of machines Requirements of vibration monitoring and noise monitoring Electrical machinery faults Thermography for condition monitoring Techniques of wear debris analysis and some of the nondestructive test (NDT) techniques for condition monitoring like ultrasonics and radiography Machine tool condition monitoring Engineering failure analysis Several case studies, mostly on failure analysis, from the author’s consulting experience Machinery Condition Monitoring: Principles and Practices presents the latest techniques in fault diagnosis and prognosis, provides many real-life practical examples, and empowers you to diagnose the faults in machines all on your own.

Download or read book Forsthoffer s Component Condition Monitoring written by Michael Forsthoffer and published by Butterworth-Heinemann. This book was released on 2018-11-16 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forsthoffer's Component Conditioning Monitoring Handbook is dedicated to the condition monitoring of all rotating equipment. It describes the Forsthoffer Associates method of Component Condition Monitoring (CCM) and gives the reader detailed instructions on what to monitor for each component type. The author's easy and approachable style makes this a very practical reference for any level of technical background. This represents the latest addition to a set that includes volumes on 1. Fundamentals of Rotating Equipment; 2. Pumps; 3. Compressors; 4. Auxiliary Systems; 5. Reliability Optimization through Component Condition Monitoring and Root Cause Analysis'. - Contains separate chapters that address each of the 5 major components of all rotating machinery - Covers what parameters must be monitored when action is required to prevent unplanned shutdown - Describes how to use specific spreadsheets for condition monitoring tasks that can be downloaded from a companion website

Download or read book Steam Turbine written by Raymond S. Beebe and published by . This book was released on 2012 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for the plant engineer, this book shows how to apply condition monitoring by performance analysis to steam turbines. Its aim is to assist to assist with performance problem solving and in decision making on steam turbine maintenance.

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

Download or read book Implementation Strategies and Tools for Condition Based Maintenance at Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2007 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a need to optimise the maintenance of nuclear power plants, both to improve reliability and increase competitiveness. The tendency is to move from preventative (time based) maintenance to one dependent on the condition of plant and its components. This publication collects and analyses proven condition based maintenance strategies and techniques in Member States as well as selected papers on maintenance optimisation.

Download or read book Machine Reliability and Condition Monitoring written by Mohammed Hamed Ahmed Soliman and published by Personal-Lean.Org. This book was released on 2020-11-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring is the process of keeping an eye on a machine's condition parameter in order to spot any major changes that could be signs of a malfunction developing. It plays a significant role in preventive maintenance and is a major component of predictive maintenance. By combining machine sensor data that detects vibration and other characteristics (in real-time) with cutting-edge machine monitoring software, condition monitoring (CM), a maintenance strategy, anticipates machine health and safety. Predictive Maintenance strategy employs vibration analysis, thermography analysis, ultrasound analysis, oil analysis and other techniques to improve machine reliability. The goal of the strategy is to provide the stated function of the facility, with the required reliability and availability at the lowest cost.

Download or read book Handbook of Maintenance Management and Engineering written by Mohamed Ben-Daya and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: To be able to compete successfully both at national and international levels, production systems and equipment must perform at levels not even thinkable a decade ago. Requirements for increased product quality, reduced throughput time and enhanced operating effectiveness within a rapidly changing customer demand environment continue to demand a high maintenance performance. In some cases, maintenance is required to increase operational effectiveness and revenues and customer satisfaction while reducing capital, operating and support costs. This may be the largest challenge facing production enterprises these days. For this, maintenance strategy is required to be aligned with the production logistics and also to keep updated with the current best practices. Maintenance has become a multidisciplinary activity and one may come across situations in which maintenance is the responsibility of people whose training is not engineering. This handbook aims to assist at different levels of understanding whether the manager is an engineer, a production manager, an experienced maintenance practitioner or a beginner. Topics selected to be included in this handbook cover a wide range of issues in the area of maintenance management and engineering to cater for all those interested in maintenance whether practitioners or researchers. This handbook is divided into 6 parts and contains 26 chapters covering a wide range of topics related to maintenance management and engineering.

Download or read book COMPRESS Condition monitoring for predictive maintenance adapted to geothermal electric submersible pumps written by and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Condition Monitoring Algorithms in MATLAB written by Adam Jablonski and published by Springer Nature. This book was released on 2021-01-20 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive and practice-oriented guide to condition monitoring algorithms in MATLAB®. After a concise introduction to vibration theory and signal processing techniques, the attention is moved to the algorithms. Each signal processing algorithm is presented in depth, from the theory to the application, and including extensive explanations on how to use the corresponding toolbox in MATLAB®. In turn, the book introduces various techniques for synthetic signals generation, as well as vibration-based analysis techniques for large data sets. A practical guide on how to directly access data from industrial condition monitoring systems (CMS) using MATLAB® .NET Libraries is also included. Bridging between research and practice, this book offers an extensive guide on condition monitoring algorithms to both scholars and professionals. “Condition Monitoring Algorithms in MATLAB® is a great resource for anyone in the field of condition monitoring. It is a unique as it presents the theory, and a number of examples in Matlab®, which greatly improve the learning experience. It offers numerous examples of coding styles in Matlab, thus supporting graduate students and professionals writing their own codes." Dr. Eric Bechhoefer Founder and CEO of GPMS Developer of the Foresight MX Health and Usage Monitoring System

Download or read book Electric Machines written by Hamid A. Toliyat and published by CRC Press. This book was released on 2017-12-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: With countless electric motors being used in daily life, in everything from transportation and medical treatment to military operation and communication, unexpected failures can lead to the loss of valuable human life or a costly standstill in industry. To prevent this, it is important to precisely detect or continuously monitor the working condition of a motor. Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis reviews diagnosis technologies and provides an application guide for readers who want to research, develop, and implement a more effective fault diagnosis and condition monitoring scheme—thus improving safety and reliability in electric motor operation. It also supplies a solid foundation in the fundamentals of fault cause and effect. Combines Theoretical Analysis and Practical Application Written by experts in electrical engineering, the book approaches the fault diagnosis of electrical motors through the process of theoretical analysis and practical application. It begins by explaining how to analyze the fundamentals of machine failure using the winding functions method, the magnetic equivalent circuit method, and finite element analysis. It then examines how to implement fault diagnosis using techniques such as the motor current signature analysis (MCSA) method, frequency domain method, model-based techniques, and a pattern recognition scheme. Emphasizing the MCSA implementation method, the authors discuss robust signal processing techniques and the implementation of reference-frame-theory-based fault diagnosis for hybrid vehicles. Fault Modeling, Diagnosis, and Implementation in One Volume Based on years of research and development at the Electrical Machines & Power Electronics (EMPE) Laboratory at Texas A&M University, this book describes practical analysis and implementation strategies that readers can use in their work. It brings together, in one volume, the fundamentals of motor fault conditions, advanced fault modeling theory, fault diagnosis techniques, and low-cost DSP-based fault diagnosis implementation strategies.