Download or read book Prediction of Crack Growth Under Creep Fatigue Loading Conditions written by KM. Nikbin and published by . This book was released on 1988 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crack growth data are presented on a brittle and a ductile low alloy steel and a nickel base superalloy which have been subjected to combined static and cyclic loading at elevated temperatures. The cyclic tests have been conducted between fixed load and fixed displacement ranges. Distinct regions of fatigue and creep dominated cracking have been identified. It is shown that crack growth eventually ceases because of load relaxation in the constant displacement amplitude tests. Fracture of a component made of the ductile steel is unlikely to occur under this type of low-cycle fatigue loading, but significant cracking is possible with the brittle steel. Where cyclic crack growth is creep controlled, it is shown that crack propagation rates can be predicted from static creep data using the creep fracture mechanics parameter C*.
Download or read book Fatigue Damage Crack Growth and Life Prediction written by F. Ellyin and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failure is a multi-stage process. It begins with the initiation of cracks, and with continued cyclic loading the cracks propagate, finally leading to the rupture of a component or specimen. The demarcation between the above stages is not well-defined. Depending upon the scale of interest, the variation may span three orders of magnitude. For example, to a material scientist an initiated crack may be of the order of a micron, whereas for an engineer it can be of the order of a millimetre. It is not surprising therefore to see that investigation of the fatigue process has followed different paths depending upon the scale of phenomenon under investigation. Interest in the study of fatigue failure increased with the advent of industrial ization. Because of the urgent need to design against fatigue failure, early investiga tors focused on prototype testing and proposed failure criteria similar to design formulae. Thus, a methodology developed whereby the fatigue theories were proposed based on experimental observations, albeit at times with limited scope. This type of phenomenological approach progressed rapidly during the past four decades as closed-loop testing machines became available.
Download or read book Methods and Models for Predicting Fatigue Crack Growth Under Random Loading written by and published by ASTM International. This book was released on with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Component Life Assessment written by G.A. Webster and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to investigate and explain the rapid advances in the characterization of high temperature crack growth behaviour which have been made in recent years, with reference to industrial applications. Complicated mathematics has been minimized with the emphasis placed instead on finding solutions using simplified procedures without the need for complex numerical analysis.
Download or read book Prediction of Fatigue crack Growth Under Variableamplitude and Spectrum Loading Using a Closure Model written by and published by . This book was released on 1981 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Expert System for Fatigue Crack Growth Predictions Based on Fatigue Crack Closure written by Ji-Ho Song and published by Springer Nature. This book was released on 2022-03-04 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates fatigue crack growth under random loading graphically. This state-of-the-art monograph introduces an expert system for crack growth predictions, particularly based on crack closure. The system is developed after years of research by the authors by using the Math-type software consisting of 5 parts. This system is unique as it is fundamentally different from previous systems as it focuses on fatigue crack growth predictions based on fatigue crack closure. This book can be a useful guide for practicing engineers, researchers, and students in the fields of mechanical, aerospace, or civil engineering.
Download or read book Fatigue Life and Crack Growth Prediction Methodology written by J. C. Newman (Jr) and published by . This book was released on 1993 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stochastic Modeling of Crack Initiation and Short crack Growth Under Creep and Creep fatigue Conditions written by and published by . This book was released on 1989 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors
Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.
Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.
Download or read book Component Reliability under Creep Fatigue Conditions written by Janos Ginsztler and published by Springer. This book was released on 2014-05-04 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure prevention, residual life assessment and life extension of materials in components operating at high temperatures are becoming increasingly important problems in the modern power plant industry. These problems are covered, and industrial examples will be introduced to illustrate the applications of those subjects covered using the results from service records.
Download or read book Handbook of Fatigue Crack Propagation in Metallic Structures written by A. Carpinteri and published by Newnes. This book was released on 2012-12-02 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this Handbook is to provide a review of the knowledge and experiences in the field of fatigue fracture mechanics. It is well-known that engineering structures can fail due to cyclic loading. For instance, a cyclically time-varying loading reduces the structure strength and can provoke a fatigue failure consisting of three stages: (a) crack initiation (b) crack propagation and (c) catastrophic failure. Since last century many scientists have tried to understand the reasons for the above-mentioned failures and how to prevent them. This Handbook contains valuable contributions from leading experts within the international scientific community and covers many of the important problems associated with the fatigue phenomena in civil, mechanical and nuclear engineering.
Download or read book Small Fatigue Cracks written by K.S. Ravichandran and published by Elsevier. This book was released on 1999-09-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.
Download or read book Probabilistic Prediction of Crack Growth Based on Creep Fatigue Damage Accumulation Mechanism written by Zhigang Wei and published by . This book was released on 2011 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper a deterministic creep/fatigue accumulation model from simple sequential and repetitive creep and fatigue crack growth mechanisms for creep-brittle materials is developed. In the model the maximum stress intensity factor and stress intensity factor range can be used to describe, respectively, the creep and fatigue crack growth behaviors. The probabilistic behavior of the combined creep-fatigue can be calculated by direct integration of a joint log-normal probability density function or other methods. The Monte Carlo simulation method is used in this paper to analyze the probabilistic behavior of the derived deterministic creep-fatigue model and to estimate the reliability of a creep-fatigue correlation as introduced by the uncertainties in both creep and fatigue lives. Predicted results from this new crack growth method are compared with the bi-linear creep-fatigue interaction models as adopted by ASME Code Case N-47 and API579/ASME FFS, and the results are discussed.
Download or read book Nano and Microstructural Design of Advanced Materials written by M. A. Meyers and published by Elsevier. This book was released on 2003-12-05 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. - Teaches effective use of advanced analysis and characterization methods at an atomistic level - Contains many supporting examples of materials in which such design concepts have been successfully applied
Download or read book Fractography in Failure Analysis of Polymers written by Michael D. Hayes and published by William Andrew. This book was released on 2015-05-08 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractography in Failure Analysis of Polymers provides a practical guide to the science of fractography and its application in the failure analysis of plastic components. In addition to a brief background on the theory of fractography, the authors discuss the various fractographic tools and techniques used to identify key fracture characteristics. Case studies are included for a wide range of polymer types, applications, and failure modes, as well as best practice guidelines enabling engineers to apply these lessons to their own work. Detailed images and their appropriate context are presented for reference in failure investigations. This text is vital for engineers who must determine the root causes of failure when it occurs, helping them further study the ramifications of product liability claims, environmental concerns, and brand image. - Presents a comprehensive guide to applied fractography, enabling improved reliability and longevity of plastic parts and products - Includes case studies that demonstrate material selection decisions and how to reduce failure rates - Provides best practices on how to analyze the cause of material failures, along with guidelines on improving design and manufacturing decisions
