Download or read book Predicting and Prolonging the Service Life of Weathering Steel Highway Structures written by Neal Damgaard and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prediction and Prolongation of the Service Life of Weathering Steel Highway Structures written by Neal R. Damgaard and published by . This book was released on 2009 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weathering steel is a high-strength, low-alloy steel which has been proven to provide a significantly higher corrosion resistance than regular carbon steel. This corrosion resistance is a product of the small amounts of alloying elements added to the steel, which enable it to form a protective oxide layer when exposed to the environment. The main advantage of its use in bridges is that, under normal conditions, it may be left unpainted, leading to significantly reduced maintenance and environmental costs. Weathering steel has been a material of choice for highway structures for almost half a century, and a very large number of structures have been constructed with it. Although its use has for the most part been successful, it has also become evident that, in circumstances where there is the presence of salt and sulphur oxides, its performance is deficient. In these situations the corrosion penetration rate is much higher than expected, and the oxide layer forms in thick layers. This presents an added risk, since these layers flake off and fall onto the roadway. The degree of corrosion on structures can be very different, even if the structural type, location, and climate are similar. Therefore the focus of the thesis is on the lifespan of weathering steel highway structures. Primarily this research is concerned with the effect of corrosion on the integrity of these structures, as well as ways of quantifying corrosion loss and protecting the structure from further corrosion. In order to determine the lifespan of weathering steel highway structures subject to different rates of corrosion, a probabilistic structural analysis program has been developed to assess the time-dependent reliability of the structure. This program used iterative Monte Carlo simulation and a series of statistical variables relating to the material, loading, and corrosion properties of the structure. A corrosion penetration equation is used to estimate thickness loss at a selected interval, and the structural properties of the bridge are modified accordingly. The ultimate limit states of shear, moment, and bearing, and the fatigue limit state of web breathing, are taken into account. Three types of structures are examined: simply-supported box and I-girder composite bridges, and a two-span box girder bridge. Based on the structural analysis of the corroding bridge structures presented herein, it can be seen that corrosion to the weathering steel girders can cause reduced service lives of the structures. I-girder bridges are shown to be more susceptible to corrosion than box girder bridges, with continuous box girder bridges showing the best performance. The amount of truck traffic does not affect the reliability of the bridge. The short-span and high strength steel bridges are more susceptible to corrosion loss, primarily because their girders have thinner sections. A two-lane bridge also has better performance than the wider bridges because the weight of the barriers and sidewalks is carried by fewer girders, so these girders are stockier. The web breathing limit state is less significant than the combined ultimate limit states. Lastly, and most importantly, inspection data from a highway bridge is used to demonstrate the benefit that can be derived from using field data to update the time-dependent reliability. The ultrasonic thickness gauge (UTG) is a common tool for thickness measurement of steel sections. When used to measure weathering steel, this instrument provides accurate data about the depth of corrosion pits, but not their lateral dimensions. The measurement does not include the corrosion layer on the opposite side of the plate from the one being measured; however, if the corrosion layer is on the measured face, a disproportionate increase in the measured thickness can be seen. In order to prevent or minimize corrosion loss, the steel is currently painted, a process with several environmental and financial disadvantages. Therefore, three novel protection methods have been assessed in a cyclic corrosion test: a zinc metallizing, an aluminum-zinc-indium alloy metallizing, and a zinc tape with a PVC topcoat. All these coatings are designed to act not just as barriers, but also as sacrificial anodes. The test was run for 212 24-hr cycles, over the course of which the all the coatings were proven effective at protecting the steel substrate, regardless of steel type and surface roughness and pretreatment. In conclusion, the threat to all types of weathering steel highway structures by contaminant-induced corrosion is significant, but inspection data permits a more accurate prediction of time-dependent reliability for a structure, and protective coatings are a promising method of slowing the advance of corrosion.
Download or read book Recent Progress in Steel and Composite Structures written by Marian A. Gizejowski and published by CRC Press. This book was released on 2016-05-03 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Progress in Steel and Composite Structures includes papers presented at the XIIIth International Conference on Metal Structures (ICMS 2016, Zielona Gra, Poland, 15-17 June 2016). The contributions focus on the progress made in theoretical, numerical and experimental research, with special attention given to new concepts and algorithmic proc
Download or read book Corrosion in Marine and Saltwater Environments 3 written by D. Shifler and published by The Electrochemical Society. This book was released on 2009-05 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions, ¿Corrosion in Marine and Saltwater Environments 3¿, is the continuation of successful symposia held in 1999 and 2004, hosted by The Electrochemical Society. The papers in this issue were presented at the 2008 PRiME meeting held in Honolulu, Hawaii, from October 12 to 17, 2008. The goal of this symposium was to address a wide spectrum of corrosion research in marine and other saltwater environments and to provide a forum to examine the most recent ideas and advances in the understanding of corrosion processes, mechanisms, and means of corrosion prevention or control from both a basic and applied research approach.
Download or read book Federally Coordinated Program of Highway Research Development and Technology Annual Progress Report Fiscal Year 1985 written by and published by . This book was released on 1986 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federally Coordinated Program of Highway Research Development and Technology written by and published by . This book was released on 1985 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Weathering Steel for Highway Structures written by Great Britain. Department of Transport and published by . This book was released on 1992 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance of Weathering Steel in Bridges written by Pedro Albrecht and published by Transportation Research Board National Research. This book was released on 1984 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report written by and published by . This book was released on 1964 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mitigation of Weldment Cracking in Steel Highway Structures Due to the Galvanizing Process written by Caroline Bennett (Civil engineer) and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural supports for signs, luminaires, and traffic signals and other steel highway structures are generally galvanized to prevent corrosion and provide a long service life. However, recent investigations have revealed incidents of cracking in weldments of galvanized structures that appear to be induced during the galvanizing process. The TRB National Cooperative Highway Research Program's NCHRP Research Report 965: Mitigation of Weldment Cracking in Steel Highway Structures Due to the Galvanizing Process proposes improved design, materials, and construction specifications of galvanized steel highway structures to mitigate weldment cra\cking caused by the galvanizing process. Supplemental materials to the report are appendices that provide details of the work performed in the project.
Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 5447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
Download or read book Design Guide for Highway Noise Barriers written by R. E. Klingner and published by . This book was released on 2003 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Code for Service Life Design written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 34 addresses Service Life Design (SLD) for plain concrete, reinforced concrete and pre-stressed concrete structures, with a special focus on design provisions for managing the adverse effects of degradation. Its objective is to identify agreed durability related models and to prepare the framework for standardization of performance based design approaches. Four different options for SLD are given: - a full probabilistic approach, - a semi probabilistic approach (partial factor design), - deemed to satisfy rules, - avoidance of deterioration. The service life design approaches described in this document may be applied for the design of new structures, for updating the service life design if the structure exists and real material properties and/or the interaction of environment and structure can be measured (real concrete covers, carbonation depths), and for calculating residual service life. The bulletin is divided into five chapters: 1. General 2. Basis of design 3. Verification of Service Life Design 4. Execution and its quality management 5. Maintenance and condition control It also includes four informative annexes, which give background information and examples of procedures and deterioration models for the application in SLD. The format of Bulletin 34 follows the CEB-FIP tradition for Model Codes: the main provisions are given on the right-hand side of the page, and on the left-hand side, the comments. Note: An Italian translation of Bulletin 34 is also available; contact us for further details.
Download or read book Durable Concrete Structures written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1992 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design guide allies basic knowledge with current engineering experience of the durability of concrete structures. It presents appropriate solutions for different environmental conditions. The complex nature of environmental effects on structures requires improved materials, as well as measures at the architectural design phase, and proper inspection and maintenance procedures.
Download or read book Concrete Technology for a Sustainable Development in the 21st Century written by Odd E. Gjorv and published by CRC Press. This book was released on 1999-12-23 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete technology for a sustainable development in the 21st century focuses on the problems and challenges for the concrete industry today and in the future with particular emphasis on environmental consiousness. Primary topics include: the improvement of concretes service life to ease technical and economical problems and the waste of natural re
Download or read book Atmospheric Corrosion written by Christofer Leygraf and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATMOSPHERIC CORROSION Presents a comprehensive look at atmospheric corrosion, combining expertise in corrosion science and atmospheric chemistry Atmospheric corrosion has been a subject of engineering study, largely empirical, for nearly a century. Scientists came to the field rather later on and had considerable difficulty bringing their arsenal of tools to bear on the problem. Atmospheric corrosion was traditionally studied by specialists in corrosion having little knowledge of atmospheric chemistry, history, or prospects. Atmospheric Corrosion provides a combined approach bringing together experimental corrosion and atmospheric chemistry. The second edition expands on this approach by including environmental aspects of corrosion, atmospheric corrosion modeling, and international corrosion exposure programs. The combination of specialties provides a more comprehensive coverage of the topic. These scientific insights into the corrosion process and its amelioration are the focus of this book. Key topics include the following: Basic principles of atmospheric corrosion chemistry Corrosion mechanisms in controlled and uncontrolled environments Degradation of materials in architectural, transport, and structural applications; electronic devices; and cultural artifacts Protection of existing materials and choosing new ones that resist corrosion Prediction of how and where atmospheric corrosion may evolve in the future Complete with appendices discussing experimental techniques, computer models, and the degradation of specific metals, Atmospheric Corrosion, Second Edition continues to be an invaluable resource for corrosion scientists, corrosion engineers, conservators, environmental scientists, and anyone interested in the theory and application of this evolving field. The book concerns primarily the atmospheric corrosion of metals and is written at a level suitable for advanced undergraduates or beginning graduate students in any of the physical or engineering sciences.
Download or read book Maintenance and Safety of Aging Infrastructure written by Dan Frangopol and published by CRC Press. This book was released on 2014-10-23 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research findings in the field of maintenance and safety of aging infrastructure. The invited contributions provide an overview of the use of advanced computational and/or experimental techniques in damage and vulnerability assessment as well as maintenance and retrofitting of aging structures and infrastructures such
