Download or read book Precast Segmental Box Girders written by Fadzli Mohamed Nazri and published by Springer. This book was released on 2019-02-09 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fundamentals of the elastic behaviour of erected precast segmental box girders (SBG) when subjected to static load, as well as the construction process (casting and erection work) involved. It analyzes and compares the experimental results with those obtained using the finite element method and theoretical calculations. A short-term deflection analysis for different loads is obtained by determining the maximum deflection, stress and strain value of single span precast SBG under a variety of transversal slope. The outcome of this work provides a better understanding of the behaviour of precast SBG in terms of structural responses as well as defects, so that maintenance work can then be focused on the critical section at mid span area specifically for the bridge project longitudinally and transversely. The book is of interest to industry professionals involved in conducting static load tests on bridges, and all researchers, designers, and engineers seeking to validate experimental work with numerical and analytical approaches.

Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."

Download or read book Analysis of Precast Segmental Box Girder Bridges written by Mohamed Abdelfatah Elmahadi and published by . This book was released on 2008 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Precast Segmental Box Girder Bridge Manual written by and published by . This book was released on 1978 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Construction of Precast Segmental Box Girder Bridge Using Overhead Gantry written by Jazlan Salleh @ Mohamed Salleh and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concrete Box Girder Bridges written by Oris H. Degenkolb and published by Iowa State Press. This book was released on 1977 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extending Span Ranges of Precast Prestressed Concrete Girders written by Reid Wilson Castrodale and published by Transportation Research Board. This book was released on 2004 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: At head of title: National Cooperative Highway Research Program.

Download or read book Superstructure Design of a Precast Segmental Box Girder Highway Bridge written by Louis J. Tilatti and published by . This book was released on 1980 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Pier Segments in Segmental Hollow Box Girder Bridges written by Nigatu Chaffo and published by Cuvillier Verlag. This book was released on 2004-02-18 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Construction and Load Tests of a Segmental Precast Box Girder Bridge Model written by S. Kashima and published by . This book was released on 1974 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Post tensioning Manual written by Post-Tensioning Institute and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Precast Substructure Design for Standard Bridge Systems written by Sarah Longstreth Billington and published by . This book was released on 1999 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed substructure system described in this report has been developed to improve the aesthetics and reduce the construction time of the support structures for standard bridges. The form of the proposed substructures is highly attractive, and is a distinct improvement over many traditional short- and medium-span bridge substructures. The substructure system developed is particularly well-suited for precasting, although the geometric form could be cast-in-situ. Precasting would result in the increased use of high performance concrete in the substructures. The use of such concrete will bring improved durability since the high performance concrete is greatly resistant to ingress of moisture and chlorides. In addition, the greater compressive strength of the high performance concretes is utilized for reducing the handling weight and dead load of the substructure units. The bent cap units are more complex than traditional cast-in-place bent caps but appear feasible for plant production or large-scale, cast-on-site projects.

Download or read book Construction and Load Tests of a Segmental Precast Box Girder Bridge Model written by Satoshi Kashima and published by . This book was released on 1974 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Precast segmental bridges written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2017-08-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of precast segmental bridges is not new: the first application documented was from the mid-1940s, designed by Eugene Freyssinet and built over the river Marne near Luzancy in France, between 1944 and 1946. Although innovative, it also contained traditional wet concrete joints between the members. The impressive breakthrough came slightly later with the introduction of match-cast joints by Jean Muller, first for a bridge near Buffalo (USA) in 1952, and later for a bridge across the River Seine at Choisy le Roi near Paris in 1962. This opened the way for a large number of new developments in terms of design, production approaches and construction techniques, and precast prestressed concrete segmental construction became rapidly one of the most efficient and successful bridge construction methods all over the world. These developments are still evolving, but the interaction between design, production and construction is a critical factor for success: the interaction creates opportunities to optimise the scheme, but at the same time is crucial to ensure safety, especially during construction, when large weights are moved, placed and secured, frequently at substantial heights. Engineers of all disciplines involved should interact during the development and realisation of precast segmental bridge (PSB) schemes, to conclude the optimum method statement and consequently check all the intermediate steps of the method statement in terms of stress, stiffness, stability, production and constructability. With the ongoing development of the PSB concept, and consequently moving limits in terms of dimensions, it was concluded to be appropriate to develop a Guide to good practice for the PSB construction method. The present report was developed by an integrated team of engineers with roots in design, structural engineering, production and construction, and provides a valuable source of knowledge, experience, recommendations and examples, with particular emphasis on the fib Model Code for Concrete Structures 2010 and fib Bulletins 20, 33, 48 and 75. I would like to thank all the members of Task Group 1.7, all the individual contributors from outside Task Group 1.7, and the reviewers of the Technical Council of the fib for their contribution to this Guide to good practice. In particular, I would like to thank Gopal Srinivasan and Marcos Sanchez, who, apart from their own contributions, did the final editorial work for this bulletin.

Download or read book Design of a Precast Segmental Balanced Cantilever Box Girder Bridge written by Joseph Showers and published by . This book was released on 1985 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Precast Post tensioned Segmental Box Girder Bridges in Vancouver written by and published by . This book was released on 1990 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent projects executed in the Greater Vancouver area have demonstrated that precast post-tensioned segmental box-girder bridges may be successfully applied to moderately sized medium-span structures. Advantages include rapid, economical constructions; shallow construction depth; and favourable aesthetic qualities. Low life-cycle costs resulting from high-quality factory-produced concrete girders and longitudinally post-tensioned deck slabs are an additional benefit. Three bridges illustrating the range of application of this bridge building system are presented. It is shown how a variety of span configurations as well as curvature in plan may be tackled. Suggestions are made for economical application of this construction method. For the covering abstract of the Conference see IRRD Abstract No. 807839.

Download or read book Concrete Box girder Bridges written by Jörg Schlaich and published by IABSE. This book was released on 1982 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: