Download or read book Practical Rotor Dynamics and Balancing written by Vibration Institute and published by . This book was released on 1995 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Balancing of Rotating Machinery written by Derek Norfield and published by Elsevier. This book was released on 2011-04-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating machinery (eg pumps, motors, compressors) is normally manufactured to precise measurements but there comes a point when the costs of manufacture mean that further precision is not cost-effective and thus any slight imbalance inherent in the machine will need to be attended to after manufacture. When such machinery is in operation, often at very high speeds of thousands of revs per minute, any imbalance will set up vibration and often noise. In addition, such imbalance will cause extra wear and loss of efficiency in the machine. The answer is to balance the affected parts of the machine so that it operates smoothly and efficiently.This book is a practical account of such balancing techniques e.g how to balance a rotor, how to set up and verify performance of a balancing machine, and procedures for on-site balancing. In addition, other common causes of vibration will be covered e.g. misalignment, bad bearings and looseness.This book is the distillation of a successful course run by the author and developed over 20 years. University engineering departments do not teach balancing techniques beyond the very basic, and there is a need for educators and engineers to have a practical book available on the topic. · A practical book which will help the reader understand the importance of balance in today's high technology world· Outlines the history of dynamic balancing and other vibration reduction techniques· Profusely illustrated throughout
Download or read book Rotor Dynamics written by J. S. Rao and published by New Age International. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Revised And Enlarged Edition Of The Book Presents An In-Depth Study Of The Dynamic Behaviour Of Rotating And Reciprocating Machinery. It Evolved Out Of Lectures Delivered At Different Universities Over The Last Two Decades. The Book Deals With Torsional And Bending Vibrations Of Rotors, Stability Aspects, Balancing And Condition Monitoring. Closed Form Solutions Are Given Wherever Possible And Parametric Studies Presented To Give A Clear Understanding Of The Subject. Transfer Matrix Methods Is Extensively Used For General Class Of Rotors For Both Bending And Torsional Vibrations.Special Attentions Are Given To Transient Analysis Of The Rotors Which Is Becoming An Essential Part Of The Design Of High Speed Machinery. Systems With Fluid Film Bearings, Cracked Rotors And Two Spool Rotors Are Also Presented.A First Course On Theory Of Vibration Is A Prerequisite To This Study. Analysis Used Is Fairly Simple, But Sufficiently Advanced To The Requisite Level Of Predicting Practical Observations. As Far As Possible, Practical Examples Are Illustrated, So That The Book Is Also Useful To Practising Engineers.A Special Feature Of This Book Is Diagnostics Of Rotating Machinery Using Vibration Signature Analysis And Application Of Expert Systems To A Field Engineer In Trouble Shooting Work.
Download or read book KONGRESSFOLGE Practical Rotor Dynamics and Balancing Short Course written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Rotor Dynamics and Balancing written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Rotordynamics and Fluid Film Bearing Design written by Wen Jeng Chen and published by . This book was released on 2015-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliographical references and index.
Download or read book Vibrations of Rotating Machinery written by Osami Matsushita and published by Springer. This book was released on 2017-05-22 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book opens with an explanation of the vibrations of a single degree-of-freedom (dof) system for all beginners. Subsequently, vibration analysis of multi-dof systems is explained by modal analysis. Mode synthesis modeling is then introduced for system reduction, which aids understanding in a simplified manner of how complicated rotors behave. Rotor balancing techniques are offered for rigid and flexible rotors through several examples. Consideration of gyroscopic influences on the rotordynamics is then provided and vibration evaluation of a rotor-bearing system is emphasized in terms of forward and backward whirl rotor motions through eigenvalue (natural frequency and damping ratio) analysis. In addition to these rotordynamics concerning rotating shaft vibration measured in a stationary reference frame, blade vibrations are analyzed with Coriolis forces expressed in a rotating reference frame. Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristics due to rotor internal damping and instabilities due to asymmetric shaft stiffness and thermal unbalance behavior.
Download or read book Rotordynamics of Turbomachinery written by John M. Vance and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the rotordynamic considerations that are important to the successful design or troubleshooting of a turbomachine. Shows how bearing design, fluid seals, and rotor geometry affect rotordynamic behavior (vibration, shaft whirling, bearing loads, and critical speeds), and describes two successful computational methods for rotordynamic analysis in terms that can be understood by practicing engineers. Gives descriptive accounts of the state of the art in several areas of the field and presents important mathematical or computational concepts, describing equations and formulas in physical terms for better understanding. Also offers tips for troubleshooting unstable machines and provides practical interpretations of vibration measurements.
Download or read book Balancing of High Speed Machinery written by Mark S. Darlow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern rotating machinery, particularly turbomachinery, is frequently being designed to operate at higher speeds than in the past. Consequently, there is an increased need to balance high-speed rotors. The purpose of this book is to provide the engineering student or practicing engineer with a single, complete reference on high-speed rotor balancing. To this end, a detailed analytical background and practical application procedures are presented for each of the principal high-speed rotor balancing methods, i.e. modal balancing, influence coefficient balancing and the Unified Balancing Approach. This information is supplemented and supported through a presentation of the theoretical development of synchronous rotor vibration and a brief overview of rigid rotor balancing techniques and machines. This is the first time this material is available in a single, concise volume, together with detailed descriptions of application procedures.
Download or read book Rotor and Structural Dynamics of Turbomachinery written by Raj Subbiah and published by Springer. This book was released on 2018-01-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and scientists with practical fundamentals for turbomachinery design. It presents a detailed analysis of existing procedures for the analysis of rotor and structure dynamics, while keeping mathematical equations to a minimum. Specific terminologies are used for rotors and structures, respectively, allowing the readers to clearly distinguish between the two. Further, the book describes the essential concepts needed to understand rotor failure modes due to lateral and torsional oscillations. It guides the reader from simple single-degree-of-freedom models to the most complex multi-degree-of-freedom systems, and provides useful information concerning steel pedestal stiffness degradation and other structural issues. Fluid-film bearing types and their dynamical behavior are extensively covered and discussed in the context of various turbomachinery applications. The book also discusses shaft alignment and rotor balancing from a practical point of view, providing readers with essential information to help them solve practical problems. As the main body of the book focuses on the diagnostics and description of case studies addressing the most pressing practical issues, together with their successful solutions, it offers a valuable reference guide, helping field engineers manage day-to-day issues with turbomachinery.
Download or read book Handbook of Rotordynamics written by Fredric F. Ehrich and published by . This book was released on 1999 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This iteration adds some 50 tables and figures, reflecting new devices and phenomena since the 1992 edition, particularly in the design of rotating machinery. Four chapters cover vibration considerations in design; analytic prediction of rotordynamic response; and balancing of flexible.
Download or read book Rotating Machinery written by Robert B. McMillan and published by CRC Press. This book was released on 2020-11-26 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A theoretical and practical understanding of unbalance and misalignment in rotating equipment is presented here. These two conditions account for the vast majority of problems with rotating equipment encountered in the real world.;Numerous examples and solutions are included to assist in understanding the various concepts. Included is information on vibration and how it is used to determine the operational integrity of rotating machinery. Also detailed are the relationships between various vibration characteristics which provide an understanding of the forces generated within operating machinery when conditions of unbalance and misalignment are present. Resonance and beat frequencies are detailed along with sources and cures.;Also covered are proper inspection procedures, single plane and dual plane methods of balancing rotating equipment, the three circle method of balancing slow speed fans, advanced rim and face method of precision alignment, and the reverse indicator method of alignment plus much more to fortify the learning experience.
Download or read book Rotor Balancing written by Hatto Schneider and published by Springer Nature. This book was released on 2023-07-03 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Für die Qualitätssicherung von Rotoren ist das Auswuchten ein unverzichtbarer Schritt. Dabei verändern sich mit jeder Weiterentwicklung der Rotoren die Anforderungen an die Auswuchttechnik. Wichtige Prinzipien des Auswuchtens werden in dem Buch erklärt. Es dient als Werkzeug, um die stets neu auftretenden Probleme beim Auswuchten sachgerecht und wirtschaftlich lösen zu können. In der 8. Auflage wird die neue Norm DIN ISO 19499 ausführlich erläutert. Die beabsichtigten Bearbeitungen aller Auswuchtnormen vonseiten des DIN werden erstmals beschrieben.
Download or read book Linear and Nonlinear Rotordynamics written by Yukio Ishida and published by John Wiley & Sons. This book was released on 2013-03-05 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide-ranging treatment of fundamental rotordynamics in order to serve engineers with the necessary knowledge to eliminate various vibration problems. New to this edition are three chapters on highly significant topics: Vibration Suppression - The chapter presents various methods and is a helpful guidance for professional engineers. Magnetic Bearings - The chapter provides fundamental knowledge and enables the reader to realize simple magnetic bearings in the laboratory. Some Practical Rotor Systems - The chapter explains various vibration characteristics of steam turbines and wind turbines. The contents of other chapters on Balancing, Vibrations due to Mechanical Elements, and Cracked Rotors are added to and revised extensively. The authors provide a classification of rotating shaft systems and general coverage of key ideas common to all branches of rotordynamics. They offers a unique analysis of dynamical problems, such as nonlinear rotordynamics, self-excited vibration, nonstationary vibration, and flow-induced oscillations. Nonlinear resonances are discussed in detail, as well as methods for shaft stability and various theoretical derivations and computational methods for analyzing rotors to determine and correct vibrations. This edition also includes case studies and problems.
Download or read book Rotordynamics written by Agnieszka Muszynska and published by CRC Press. This book was released on 2005-05-20 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the most important parts of rotating machinery, rotors are also the most prone to mechanical vibrations, which may lead to machine failure. Correction is only possible when proper and accurate diagnosis is obtained through understanding of rotor operation and all of the potential malfunctions that may occur. Mathematical modeling, in particular
Download or read book Dynamics of Rotors and Foundations written by Erwin Krämer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotordynamics are of great importance in the design, manufacture and assembly of turbomachines as well as in ensuring their safe operation. Also important are the dynamics of the foundation and its interaction with the dynamics of the rotor. This book is divided into four parts. Following a presentation of the basic theory the dynamics of rotors supported on several bearings. The third part describes the dynamics of foundations of turbine line-outs and the calculations for a turbomachine coupled with its foundation. The last part includes a section on estimation procedures, a comprehensive presentation of the theoryand practice of rotors having a transverse crack, a section on the mathematical fundamentals and a description of the computer program used for the examples in the book. The book addresses both the practical engineer and the theoretician and should provide manufacturers, operators, university and polytechnic lecturers and students with an understanding of the vibrations of turbomachines. The results are described in such a way that they can be easily understood and applied.
Download or read book Machinery Vibration Balancing Special Reprint Edition written by Victor Wowk and published by McGraw Hill Professional. This book was released on 1998-10-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables you to measure, isolate, and reduce rotating component's vibration, resonance, or misalignment problem. This book helps you to balance everything from ceiling fans to turbine engines, and select and apply balancing sensors and systems for single-plane and two-plane balancing and overhung and flexible-rotor balancing.
