Download or read book Practical Guide to Thermal Power Station Chemistry written by Soumitra Banerjee and published by Orange Books. This book was released on 2020-11-25 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the entire gamut of work which chemistry department of a power plant does. The book covers water chemistry, steam-water cycle chemistry, cooling water cycle chemistry, condensate polishing, stator water conditioning, coal analysis, water analysis procedures in great details. It is for all kinds of intake water and all types of boilers like Drum/Once-through for subcritical and supercritical technologies in different operating conditions including layup. It has also covered nuances of different cycle chemistry treatments like All Volatile / Oxygenated. One of the major reasons of generation loss in a thermal plant is because of boiler tube leakage. There is illustration and elucidation on this which will definitely make people more aware of the importance of adherence to strict quality parameters required for the adopted technology prescribed by well researched organization like EPRI. The other important coverage in this book is determination of quality of primary and secondary fuel which is very important to understand combustion in Boiler, apart from its commercial implication. The health analysis of Lubricants and hydraulic oil have also been adequately covered. I am very much impressed with the detailing of each and every issue. Though Soumitra refers the book as "Practical Guide", the reader will find complete theoretical background of suggested action and the rational of monitoring each parameter. He has detailed out the process, parameters, sampling points, sample frequency & collection methods, measurement techniques, laboratory set up and record keeping very meticulously and there is adequate emphasis on trouble shooting too. There is a nice blending of theory and practice in such a way that the reader at the end will not only learn what to do and how to do, he will also know why to do. I hope this book will be invaluable and a primer to every power plant chemist and the station management shall find it a bankable document to ensure best chemistry practices.

Download or read book Power Plant Water Chemistry written by Brad Buecker and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Thermal Power Plant Engineering and Operation written by P.K Das, A.K Das and published by Notion Press. This book was released on 2018-11-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to meet the requirements of the fresh engineers on the field to endow them with indispensable information, technical know-how to work in the power plant industries and its associated plants. The book provides a thorough understanding and the operating principles to solve the elementary and the difficult problems faced by the modern young engineers while working in the industries. This book is written on the basis of ‘hands-on’ experience, sound and in-depth knowledge gained by the authors during their experiences faced while working in this field. The problem generally occurs in the power plants during operation and maintenance. It has been explained in a lucid language.

Download or read book Handbook of Power Plant Chemistry written by Hans-Günter Heitmann and published by . This book was released on 1993 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Plant Water Chemistry written by Brad Buecker and published by PennWell Books. This book was released on 1997 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook for utility personnel and independent power producers provides detailed discussion and examples of solutions to water chemistry problems in power plant boilers. Plant efficiency and profitability depend on avoiding such problems as pH extremes, oxygen scavenging, corrosion, scale, and contamination. Formulas and calculations are provided for each area of concern.

Download or read book Thermal Power Plants Volume II written by Robin A. Chaplin and published by EOLSS Publications. This book was released on 2009-11-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers

Download or read book Operation and Maintenance of Thermal Power Stations written by Pradip Chanda and published by Springer. This book was released on 2016-07-01 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates operation and maintenance practices/guidelines for economic generation and managing health of a thermal power generator beyond its regulatory life. The book provides knowledge for professionals managing power station operations, through its unique approach to chemical analysis of water, steam, oil etc. to identify malfunctioning/defects in equipment/systems much before the physical manifestation of the problem. The book also contains a detailed procedure for conducting performance evaluation tests on different equipment, and for analyzing test results for predicting maintenance requirements, which has lent a new dimension to power systems operation and maintenance practices. A number of real life case studies also enrich the book. This book will prove particularly useful to power systems operations professionals in the developing economies, and also to researchers and students involved in studying power systems operations and control.

Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2015-08-20 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plant: Design and Operation deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design. Its author has a 40-long association with thermal power plants in design as well as field engineering, sharing his experience with professional engineers under various training capacities, such as training programs for graduate engineers and operating personnel. Thermal Power Plant presents practical content on coal-, gas-, oil-, peat- and biomass-fueled thermal power plants, with chapters in steam power plant systems, start up and shut down, and interlock and protection. Its practical approach is ideal for engineering professionals. Focuses exclusively on thermal power, addressing some new frontiers specific to thermal plants Presents both technology and design aspects of thermal power plants, with special treatment on plant operating practices and troubleshooting Features a practical approach ideal for professionals, but can also be used to complement undergraduate and graduate studies

Download or read book Power Plant Instrumentation and Control Handbook written by Swapan Basu and published by Academic Press. This book was released on 2014-11-04 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses instrumentation and control in modern fossil fuel power plants, with an emphasis on selecting the most appropriate systems subject to constraints engineers have for their projects. It provides all the plant process and design details, including specification sheets and standards currently followed in the plant. Among the unique features of the book are the inclusion of control loop strategies and BMS/FSSS step by step logic, coverage of analytical instruments and technologies for pollution and energy savings, and coverage of the trends toward filed bus systems and integration of subsystems into one network with the help of embedded controllers and OPC interfaces. The book includes comprehensive listings of operating values and ranges of parameters for temperature, pressure, flow, level, etc of a typical 250/500 MW thermal power plant. Appropriate for project engineers as well as instrumentation/control engineers, the book also includes tables, charts, and figures from real-life projects around the world. Covers systems in use in a wide range of power plants: conventional thermal power plants, combined/cogen plants, supercritical plants, and once through boilers Presents practical design aspects and current trends in instrumentation Discusses why and how to change control strategies when systems are updated/changed Provides instrumentation selection techniques based on operating parameters. Spec sheets are included for each type of instrument Consistent with current professional practice in North America, Europe, and India

Download or read book Thermal Power Plants Volume III written by Robin A. Chaplin and published by EOLSS Publications. This book was released on 2009-11-30 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Pants (Volume III) has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers

Download or read book Thermal Power Plants written by Robin A. Chaplin and published by Encyclopedia of Life Support Systems. This book was released on 2009-12-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plants theme is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. The Theme on Thermal Power Plants presents three main topics which are then expanded into multiple subtopics, each as a chapter. The first topic covers the basic theory including fossil fuel combustion, nuclear fission, thermal fluids and thermodynamic cycles. It then deals with those aspects important to the maintenance of high efficiency and good reliability such as exergy analysis, material characteristics and life extension. The second topic deals with the production of steam. Although this is only the heat receiving part of the steam cycle it is consistent with the general layout of the power plant where the fossil fuel fired boiler or nuclear fission reactor is a separate and distinct part with its own ancilliary equipment. Fossil boilers and nuclear reactors both produce steam but are so different that each is covered separately in its respective series of chapters. The third topic deals with the generation of power utilizing the steam produced in the boiler or reactor. Several chapters cover steam turbine design and operation. Since power must be produced to exactly match the demand, consideration is given to operational constraints and protective devices. Heat rejection in cooling towers is important where no large body of water exists and is addressed in one chapter. Gas turbines are used for peak power generation and, with steam turbines, for combined cycle plants so are dealt with in two chapters. Conversion of mechanical power from the turbine to electrical power for distribution to the consumer is an important aspect and is covered by the last chapter. These three volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.

Download or read book Modern Power Station Practice Chemistry and metallurgy written by Great Britain. Central Electricity Generating Board and published by . This book was released on 1971 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Power Station Practice written by Central Electricity Generating Board and published by . This book was released on 1971 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Power Station Practice written by Central Electricity Generating Board and published by . This book was released on 1971 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2016-08-24 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plants: Pre-Operational Activities covers practical information that can be used as a handy reference by utility operators and professionals working in new and existing plants, including those that are undergoing refurbishments and those that have been shut for long periods of time. It is fully comprehensive, including chapters on flushing boiler systems, various methods of testing steam generators, and the drying out of generators. This book will be invaluable for anyone working on the startup, commissioning, and operation of thermal power plants. It is also a great companion book to Sarkar’s Thermal Power Plant: Design and Operation. Sarkar has worked with thermal power plants for over 40 years, bringing his experience in design and operations to help new and experienced practicing engineers perform effective pre-operational activities. Consolidates all pre-operational aspects of thermal power plants Explains how to handle equipment safely and work efficiently Provides guidance for new and existing power plants to help reduce outage time and save on budgets

Download or read book Thermal Power Plants Handbook written by Matt Danson and published by . This book was released on 2015-02-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal power plants are significant process industries for engineering specialists. The power sector has been facing several crucial issues over the past few years. The primary challenge is to meet the increasing power demand in a sustainable and efficient manner. Practicing power plant engineers not only look after the maintenance and operations of the plant, but also look after a variety of activities like research and development, starting from power generation to the environmental evaluation of the power plants. This book discusses features, operational matters, advantages and limitations of power plants, as well as the benefits of renewable power generation. It also elucidates thermal performance evaluation, fuel combustion matters, performance monitoring and modeling, component fault diagnosis and prognosis, functional analysis, economics of plant operation and maintenance, and environmental facets. This book discusses numerous issues related to both coal fired and gas turbine power plants. It will be beneficial for undergraduate and research oriented students, and for engineers working in power plants.

Download or read book Revised Training Manual on CFBC Boilers Auxiliaries Non Reheat type written by Sh. Indu Bhushan Mishra and published by Prameela Technical Solutions. This book was released on with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly Recommended for : Power Plant Professionals seeking high growth in careerInterview preparations for power plant jobs The comprehensive manual on CFBC Boilers is up for sale online. Covering the critical aspects for a power plant engineer, it discusses the trivial issues generally overlooked in power plant The aim is to give following benefits to the reader: To provide an in-depth knowledge of plant and equipment to the plant professionals associated with industrial boilers and turbines. It is to be noted that most of the industrial thermal units (like captive power plants attached to main technological units) are of non-reheat type. To cover the practical aspects of thermal power stations missing in most of the books available in the market. The book describes in details the constructional features of the plant and equipment, their operation and maintenance and overhauling procedures, performance monitoring as well as troubleshooting. To cover the theoretical aspects of a thermal unit necessary to be known to the professionals for thorough understanding of the systems involved. This knowledge would assist them: In selecting the plant and equipment suitable to their requirement In operating and maintaining the plant with best efficiency, availability and reliability The book is a must for those working professionals who aspire for a fast growth of their professional career. It will also be of immense help to the personnel preparing for boiler proficiency examinations. It contains following topics: Chapter 1 - FUNDAMENTALS OF A STEAM POWER PLANT Chapter 2 - FUELS FOR POWER GENERATION Chapter 3 - PRINCIPLES OF COMBUSTION Chapter 4 - GENERAL DESCRIPTION OF A CIRCULATING FLUIDIZED BED COMBUSTION BOILER Chapter 5 - FEATURES OF CIRCULATING FLUIDIZED BED (CFB) BOILERS Chapter 6 - HEAT EXCHANGERS IN CFBC BOILERS Chapter 7 - DESIGN AND MATERIAL CONSIDERATIONS Chapter 8 - ELECTROSTATIC PRECIPITATION AND DUST EXTRACTION Chapter 9 - DRAUGHT SYSTEM Chapter 10 - BOILER WATER CHEMISTRY Chapter 11 - OPERATION OF CFBC BOILERS Chapter 12 - PRESERVATION OF BOILER Chapter 13 - MECHANICAL MAINTENANCE OF CFBC BOILERS Chapter 14 – BOILER PERFORMANCE OPTIMIZATION Chapter 15 - TUBE LEAKAGES IN CFBC BOILERS SYMPTOMS, CAUSES AND REMEDIES Chapter 16 - FURNACE EXPLOSION IN CFBC BOILERS – EXPLANATION, PREVENTION AND PROTECTION