Download or read book Practical Design of Ships and Mobile Units written by Marinus Willem Cornelis Oosterveld and published by Elsevier Publishing Company. This book was released on 1998 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the 7th International Symposium on Practical Design of Ships and Mobile Units. The symposium was held at the Congress Centre in The Hague, The Netherlands on 20-25 September, 1998.The overall aim of PRADS conferences is to advance the design of ships and mobile marine structures through the exchange of knowledge and the promotion of discussions on relevant topics in the fields of naval architecture and marine and offshore engineering. Greater international co-operation of this kind can help improve design and production methods and so increase the efficiency, economy and safety of ships and mobile units. The main themes of this symposium are design synthesis, production, ship hydromechanics, ship structures and materials and offshore engineering. Some topics which attracted many papers were design loads, design for ultimate strength, impact of safety and environment, grounding and collision, resistance and flow, seakeeping, fatigue considerations and propulsor and propulsion systems.
Download or read book Practical Design of Ships and Other Floating Structures written by You-Sheng Wu and published by Elsevier. This book was released on 2001-08-22 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains the papers presented at The 8th International Symposium on Practical Design of Ships and Other Floating Structures held in China in September 2001 - the first PRADS of the 21st Century. The overall aim of PRADS symposia is to advance the design of ships and other floating structures as a professional discipline and science by exchanging knowledge and promoting discussion of relevant topics in the fields of naval architecture and marine and offshore engineering. In line with the aim, in welcoming the new era, this Symposium is intended to increase international co-operation and give a momentum for the new development of design and production technology of ships and other floating structures for efficiency, economy, safety, and environmental production. The main themes of this Symposium are Design Synthesis, Production, Hydrodynamics, Structures and Materials of Ships and Floating Systems. Proposals for over 270 papers from 26 countries and regions within the themes were received for PRADS 2001, and about 170 papers were accepted for presentation at the symposium. With the high quality of the proposed papers the Local Organising Committee had a difficult task to make a balanced selection and to control the total number of papers for fitting into the allocated time schedule approved by the Standing Committee of PRADS. Volume I covers design synthesis, production and part of hydrodynamics. Volume II contains the rest of hydrodynamics, and structures and materials.
Download or read book Practical Design of Ships and Other Floating Structures written by Tetsuo Okada and published by Springer Nature. This book was released on 2020-10-05 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed proceedings of the 14th International Symposium, PRADS 2019, held in Yokohama, Japan, in September 2019. It brings together naval architects, engineers, academic researchers and professionals who are involved in ships and other floating structures to share the latest research advances in the field. The contents cover a broad range of topics, including design synthesis for ships and floating systems, production, hydrodynamics, and structures and materials. Reflecting the latest advances, the book will be of interest to researchers and practitioners alike.
Download or read book Ship and Mobile Offshore Unit Automation written by Henryk Pepliński and published by Gulf Professional Publishing. This book was released on 2019-08-23 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship and Mobile Offshore Unit Automation: A Practical Guide: A Practical Guide gives engineers a much-needed reference on relevant standards and codes, along with practical case studies on how to use these standards on actual projects and plans. Packed with the critical procedures necessary for each phase of the project, the book also gives an outlook on trends of development for control and monitoring systems, including usage of artificial intelligence in software development and prospects for the use of autonomous vessels.Rounding out with a glossary and introductory chapter specific to the new marine engineer just starting, this book delivers a source of valuable information to help offshore engineers be better prepared to safely and efficiently design today's offshore unit control systems. - Helps readers understand the worldwide offshore unit regulations necessary for monitoring systems and automation installation, including ISO, IEC, IEEE, IMO, SOLAS AND MODU, ABS, DNVGL, API, NMA and NORSOK - Presents real-world examples that apply standards - Provides tactics on how to procure control and monitoring systems specific to the offshore industry
Download or read book Progress in the Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2017-04-28 with total page 2192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Analysis and Design of Marine Structures collects the contributions presented at MARSTRUCT 2017, the 6th International Conference on Marine Structures (Lisbon, Portugal, 8-10 May 2017). The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, and the fifth in Southampton, UK in March 2015. This Conference series deals with Ship and Offshore Structures, addressing topics in the areas of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation, and - Structural Reliability, Safety and Environmental Protection Progress in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures.
Download or read book Ship Resistance and Propulsion written by Anthony F. Molland and published by Cambridge University Press. This book was released on 2017-08-17 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition provides a modern scientific approach to evaluating ship resistance and propulsion for a range of ship types.
Download or read book Advances in the Collision and Grounding of Ships and Offshore Structures written by Hervé Le Sourne and published by CRC Press. This book was released on 2023-09-11 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers state-of-the-art developments in the collision and grounding of ship and offshore structures. The topics covered by the contributions include: dynamics of vessels in collision and grounding; collision and grounding in Arctic conditions; collision and grounding statistics and measures of the probability of incidents; risk assessment of collision and grounding; measures for reduction of collision and grounding, machine learning methods for the evaluation of probabilistic collision and grounding risk; new designs for improvement of structural resistance to collisions; analysis of ultimate strength of damaged ship structures; design of buffer bows to reduce collision consequences; innovative navigation systems for safer sea transportation, collision between ships and offshore structures; collision between ships and fixed or floating bridges, collision and grounding experiments; properties of materials under impact loadings; residual strength of damaged ships and offshore structures; hull girder response of ships under severe dynamic loadings. The book is aimed at naval architects, marine engineers and scientists. The ICCGS conferences aim to present state-of-the-art methods for analysis and design against collision and grounding of ships, collisions between ships and icebergs, offshore structures, bridges, submerged tunnels and waterfront structures. Previous conferences were held in: San Francisco, USA in 1996; Copenhagen, Denmark in 2001; Tokyo, Japan in 2004; Hamburg, Germany in 2007; Helsinki, Finland in 2010; Trondheim, Norway in 2013; Ulsan, South Korea in 2016, and Lisbon, Portugal in 2019. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences, and the Collision and Grounding of Ships and Offshore Structures (ICCGS) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.
Download or read book Contemporary Ideas on Ship Stability written by D. Vassalos and published by Elsevier. This book was released on 2000-12-14 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely publicised disasters serve as a reminder to the maritime profession of the eminent need for enhancing safety cost-effectively and as a strong indicator of the existing gaps in the stability safety of ships and ocean vehicles. The problem of ship stability is so complex that practically meaningful solutions are feasible only through close international collaboration and concerted efforts by the maritime community, deriving from sound scientific approaches. Responding to this and building on an established track record of co-operative research between UK and Japan, a Collaborative Research Project (CRP) was launched in 1995.This volume includes selected material from the first four workshops: 1st in University of Strathclyde, July 1995 organized by Professor Vassalos; 2nd in Osaka Japan, Osaka University, November 1996 organized by Professor Masami Hamamoto; 3rd in Crete Greece, Ship Design Laboratory of the National Technical University of Athens (NTUA-SDL), October 1997 organized by Professor Apostolos Papanikolaou; and 4th in Newfoundland Canada, Institute for Marine Dynamics, September 1998 organized by David Molyneux. It contains 46 papers that represent all currently available expertise on ship stability, spanning 17 countries from around the world. The framework adopted for grouping the papers aims to cover broad areas of ship stability in a way that it provides a template for future volumes.
Download or read book Ultimate Limit State Analysis and Design of Plated Structures written by Jeom Kee Paik and published by John Wiley & Sons. This book was released on 2018-03-02 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews and describes both the fundamental and practical design procedures for the ultimate limit state design of ductile steel plated structures The new edition of this well-established reference reviews and describes both fundamentals and practical design procedures for steel plated structures. The derivation of the basic mathematical expressions is presented together with a thorough discussion of the assumptions and the validity of the underlying expressions and solution methods. Furthermore, this book is also an easily accessed design tool, which facilitates learning by applying the concepts of the limit states for practice using a set of computer programs, which can be downloaded. Ultimate Limit State Design of Steel Plated Structures provides expert guidance on mechanical model test results as well as nonlinear finite element solutions, sophisticated design methodologies useful for practitioners in industries or research institutions, and selected methods for accurate and efficient analyses of nonlinear behavior of steel plated structures both up to and after the ultimate strength is reached. Covers recent advances and developments in the field Includes new topics on constitutive equations of steels, test database associated with low/elevated temperature, and strain rates Includes a new chapter on a semi-analytical method Supported by a companion website with illustrative example data sheets Provides results for existing mechanical model tests Offers a thorough discussion of assumptions and the validity of underlying expressions and solution methods Designed as both a textbook and a handy reference, Ultimate Limit State Design of Steel Plated Structures, Second Edition is well suited to teachers and university students who are approaching the limit state design technology of steel plated structures for the first time. It also meets the needs of structural designers or researchers who are involved in civil, marine, and mechanical engineering as well as offshore engineering and naval architecture.
Download or read book Safety Reliability and Risk Analysis written by Sebastian Martorell and published by CRC Press. This book was released on 2008-09-10 with total page 3512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisi
Download or read book Marine Rudders and Control Surfaces written by Anthony F. Molland and published by Elsevier. This book was released on 2011-02-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Rudders and Control Surfaces guides naval architects from the first principles of the physics of control surface operation, to the use of experimental and empirical data and applied computational fluid dynamic modelling of rudders and control surfaces.The empirical and theoretical methods applied to control surface design are described in depth and their use explained through application to particular cases. The design procedures are complemented with a number of worked practical examples of rudder and control surface design.• The only text dedicated to marine control surface design• Provides experimental, theoretical and applied design information valuable for practising engineers, designers and students• Accompanied by an online extensive experimental database together with software for theoreticalpredictions and design development
Download or read book Twenty Second Symposium on Naval Hydrodynamics written by National Research Council and published by National Academies Press. This book was released on 2000-02-02 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Twenty-Second Symposium on Naval Hydrodynamics was held in Washington, D.C., from August 9-14, 1998. It coincided with the 100th anniversary of the David Taylor Model Basin. This international symposium was organized jointly by the Office of Naval Research (Mechanics and Energy Conversion S&T Division), the National Research Council (Naval Studies Board), and the Naval Surface Warfare Center, Carderock Division (David Taylor Model Basin). This biennial symposium promotes the technical exchange of naval research developments of common interest to all the countries of the world. The forum encourages both formal and informal discussion of the presented papers, and the occasion provides an opportunity for direct communication between international peers.
Download or read book Mechanical Design Theory and Methodology written by Manjula B. Waldron and published by Springer Science & Business Media. This book was released on 2013-04-09 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, Mechanical Design: Theory and Methodology, has been put together over the past four years. Most of the work is ongoing as can be ascertained easily from the text. One can argue that this is so for any text or monograph. Any such book is only a snapshot in time, giving information about the state of knowledge of the authors when the book was compiled. The chapters have been updated and are representative of the state of the art in the field of design theory and methodology. It is barely over a decade that design as an area of study was revived, mostly at the behest of industry, government, and academic leaders. Profes sor Nam Suh, then the head of the Engineering Directorate at the National Science Foundation, provided much of the impetus for the needed effort. The results of early work of researchers, many of whom have authored chapters in this book, were fundamental in conceiving the ideas behind Design for X or DFX and concurrent engineering issues. The artificial intelli gence community had a strong influence in developing the required com puter tools mainly because the field had a history of interdisciplinary work. Psychologists, computer scientists, and engineers worked together to under stand what support tools will improve the design process. While this influ ence continues today, there is an increased awareness that a much broader community needs to be involved.
Download or read book Towards Green Marine Technology and Transport written by Carlos Guedes Soares and published by CRC Press. This book was released on 2015-09-04 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Towards Green Marine Technology and Transport covers recent developments in marine technology and transport. The book brings together a selection of papers reflecting fundamental areas of recent research and development in the fields of ship hydrodynamics, marine structures, ship design, shipyard technology, ship machinery, maritime transportation,
Download or read book Mitochondrial Medicine written by Salvatore DiMauro and published by CRC Press. This book was released on 2006-04-19 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitochondrial dysfunction is increasingly being recognized as the basis of a wide variety of human diseases. Providing an authoritative update on our current knowledge of mitochondrial medicine, this text draws together world authorities from various fields to present general therapeutic strategies, as well as the treatments presently available in different specialties - thus making it essential reading for clinicians involved with the management of patients with mitochondrial diseases. A unique work, this text covers a range of specialties, including cardiology, ophthalmology, otology, nephrology, gastroenterology, hematology-oncology, and reproductive medicine, and does not focus exclusively on the more commonly known neurologic conditions. An accessible, user-friendly text, it also presents translational concepts of mitochondrial biogenesis and genetics in vignettes related to specific questions raised by the disease under discussion, rather than concentrating on basic science, which can often intimidate clinicians. This pioneering work is primarily directed to a clinical audience who are interested in the diverse and diagnostically challenging clinical presentations of mitochondrial diseases and their pathophysiology.
Download or read book SSC written by United States. Ship Structure Committee and published by . This book was released on 1992 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Methods for Structural Design written by Carlos Guedes Soares and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contributions from various authors on different important topics related with probabilistic methods used for the design of structures. Initially several of the papers were prepared for advanced courses on structural reliability or on probabilistic methods for structural design. These courses have been held in different countries and have been given by different groups of lecturers. They were aimed at engineers and researchers who already had some exposure to structural reliability methods and thus they presented overviews of the work in the various topics. The book includes a selection of those contributions, which can be of support for future courses or for engineers and researchers that want to have an update on specific topics. It is considered a complement to the existing textbooks on structural reliability, which normally ensure the coverage of the basic topics but then are not extensive enough to cover some more specialised aspects. In addition to the contributions drawn from those lectures there are several papers that have been prepared specifically for this book, aiming at complementing the others in providing an overall account of the recent advances in the field. It is with sadness that in the meanwhile we have seen the disappearance of two of the contributors to the book and, in fact two of the early contributors to this field.
