Download or read book Practical Cold Spray written by Victor Kenneth Champagne Jr. and published by Springer Nature. This book was released on 2021-06-18 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed explanation of the cold spray process from a practical standpoint. Drawing on the authors’ 36 years of research and development experience, it is firmly rooted in theory but also substantiated by empirical data and practical knowledge, offering potential users the information they need to recognize the advantages, as well as the limitations, of cold spray. This sets it apart from previous works on the subject, which have been purely academic. Cold spray technology has made great dramatic strides over the last 10 years and is now being used extensively in the aerospace, electronics, automotive, medical, and even the petrochemical industries. Most recently, cold spray of near-net shaped parts was accomplished – something previously assumed to be impossible because of the limitations of commercially available cold spray systems and a lack of fundamental understanding regarding the process. The cost of cold spray has also declined, making it appealing to industry through the introduction of new powders, surface preparation techniques, and recovery systems tailored to the cold spray process. Though primarily intended for users of the technology, this handbook is also a valuable resource for researchers interested in advances in cold spray materials, improved feedstock powders, advanced hardware and software development, surface preparation techniques, and the numerous applications developed to date. For example, cold spray aluminum alloys have been developed that offer the strength and ductility of wrought material in the as-sprayed condition. This has yet to be achieved by conventional powder consolidation methods including laser sintering, electron beam, and ultrasonic techniques. Other topics covered include additive manufacturing, structural repair, nondestructive evaluation, advanced cold spray materials, qualification requirements, cold spray systems comparison, and, finally, helium recovery. Thanks to its practical focus, the book provides readers with everything they need to understand, evaluate, and implement cold spray technology.

Download or read book Cold Spray Technology written by Anatolii Papyrin and published by Elsevier. This book was released on 2006-10-04 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is recognized by world leading scientists and specialists. A wide spectrum of research is being conducted at many research centres and companies in many countries. New approach to spray coatings Results are exceptionally pure coatings Low spray temperature without degradation of powder and substrate materials High productivity, high deposition efficiency High operational safety because of absence of high temperature gas jets, radiation and explosive gases Excellent thermal and electrical conductivity Wide spectrum of applications because of important advantages of the process

Download or read book Modern Cold Spray written by Julio Villafuerte and published by Springer. This book was released on 2015-08-24 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the current state of the art of the novel cold spray process. Cold spray is a solid state metal consolidation process, which allows engineers to tailor surface and shape properties by optimizing process parameters, powder characteristics and substrate conditions for a wide variety of applications that are difficult or impossible by other techniques. Readers will benefit from this book's coverage of the commercial evolution of cold spray since the 1980's and will gain a practical understanding of what the technology has to offer.

Download or read book High Pressure Cold Spray written by C. M. Kay and published by . This book was released on 2016-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a highly practical and useful ""go-to"" resource that presents an in-depth look at the high pressure cold spray process and describes applications in various industries. Cold spray continues to be the fastest developing spray technology over the last decade, and a significant number of scientists, engineers, and technologists are joining the cold spray community around the globe. The technology is relatively young and work is being simultaneously pursued in universities, research centers, and in many high tech industries. As this novel technology spreads quickly into many new application areas, there is a large need for an authoritative source of information. This new book addresses this need and will be indispensable to universities, libraries, and those involved in thermal spray. It presents baseline information on design and modeling, materials science of engineered coatings, and specific applications in various high tech industries, and is also a hands-on resource for cold spray operators.

Download or read book Cold Spray Coatings written by Pasquale Cavaliere and published by Springer. This book was released on 2017-11-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.

Download or read book The Cold Spray Materials Deposition Process written by and published by Elsevier. This book was released on 2007-09-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cold spray process produces dense, low oxide coatings which can be used in such diverse applications as corrosion control and metals repair. It has emerged as an important alternative to thermal spray coating techniques in certain areas. This pioneering book reviews both the fundamentals of the process and how it can best be applied in practice. The first part of the book discusses the development of the process together with its advantages and disadvantages in comparison with thermal spray coating techniques. Part two reviews key process parameters such as powders, nozzle design, particle temperature and velocity, and particle/substrate interaction. It also describes portable and stationary cold spray systems. The final part of the book discusses how the cold spray process can be applied in such areas as improved wear, corrosion protection, electromagnetic interference shielding and repair of damaged components. The cold spray materials deposition process is a standard reference on this important process and its industrial applications. Examines the fundamentals of the cold spraying process Assesses how the technique can best be applied in practice Describes portable and stationary cold spray systems

Download or read book Advances in Cold Spray written by Victor K. Champagne and published by Woodhead Publishing. This book was released on 2023-06-23 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Cold Spray: A Coating Deposition and Additive Manufacturing Process, Second Edition reviews the fundamental processes and recent advances made in the field of cold spray. This fully updated edition now includes a special chapter on Cold Spray Additive Manufacturing, along with advancements in impact modeling and simulation that allow a better understanding of the cold spray bonding mechanisms, powder synthesis and predictive modeling to improve the engineering of cold spray powders. In addition, materials properties data is a backbone of this book because the advanced cold spray materials have proven to be comparable to wrought and enable cold spray to be incorporated into structural applications for near-net shape parts production as well as for repair. Finally, numerous modern applications of cold spray representative of the Electronics, Medical, Petrochemical, Nuclear, Aerospace, Automotive, and Additive Manufacturing industries are presented. - Provides information on the fundamentals of cold spray as an additive manufacturing process - Presents the significant increase in properties of cold spray materials achieved to date - Discusses recent advancements in cold spray powders, equipment, automation, modeling and simulation and the expansion of applications

Download or read book Cold Spray Additive Manufacturing written by Shuo Yin and published by Springer Nature. This book was released on 2021-04-28 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically describes the status quo and future development of cold spray additive manufacturing technology. It starts with a comprehensive introduction to the fundamentals of cold spray additive manufacturing, including its history, working principle, equipment, processing parameters and powder feedstock. It then discusses the fundamentals of and the latest developments in the gas flow character, particle acceleration, particle deposition and bond mechanism from the perspectives of both experiments and modelling to provide readers with insights into the cold spray additive manufacturing process. Further, it explores microstructure and properties, which are major concerns in the context of cold sprayed deposits. The book also highlights the strengthening strategies for cold sprayed deposits, from pre- and in-process to post-treatment. Lastly, it examines the current and potential applications of cold spray additive manufacturing.

Download or read book High Pressure Cold Spray written by Charles M. Kay and published by . This book was released on 2016 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cold Spray in the Realm of Additive Manufacturing written by Sunil Pathak and published by Springer Nature. This book was released on 2020-05-12 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process. Bonding mechanism and powder substrate interface are an important part of the book. The chapters present the recent developments in materials used in cold spraying for AM and various coating applications. The latest research in this area as well as possible avenues of future research are also highlighted as a way to encourage the researchers.

Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys

Download or read book Advanced Coating Materials written by Liang Li and published by John Wiley & Sons. This book was released on 2018-12-06 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive, yet practical source of reference, and excellent foundation for comparing the properties and performance of coatings and selecting the most suitable materials based on specific service needs and environmental factors. Coating technology has developed significant techniques for protecting existing infrastructure from corrosion and erosion, maintaining and enhancing the performance of equipment, and provided novel functions such as smart coatings greatly benefiting the medical device, energy, automotive and construction industries. The mechanisms, usage, and manipulation of cutting-edge coating methods are the focus of this book. Not only are the working mechanisms of coating materials explored in great detail, but also craft designs for further optimization of more uniform, safe, stable, and scalable coatings. A group of leading experts in different coating technologies demonstrate their main applications, identify the key bottlenecks, and outline future prospects. Advanced Coating Materials broadly covers the coating techniques, including cold spray, plasma vapor deposition, chemical vapor deposition, sol–gel method, etc., and their significant applications in microreactor technology, super(de)wetting, joint implants, electrocatalyst, etc. Numerous kinds of coating structures are addressed, including nanosize particles, biomimicry structures, metals and complexed materials, along with the environmental and human compatible biopolymers resulting from microbial activities. This state-of-the-art book is divided into three parts: (1) Materials and Methods: Design and Fabrication, (2) Coating Materials: Nanotechnology, and (3) Advanced Coating Technology and Applications.

Download or read book The Imperfect Environmentalist written by Sara Gilbert and published by Ballantine Books. This book was released on 2013-08-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Actress, producer, mother, and imperfect environmentalist, Sara Gilbert understands how helping the environment can seem overwhelming. Between keeping up with work, friends, and kids, who has the time or money to maintain a compost pile, become an activist, or knit a sweater out of recycled grocery bags? Fortunately, we now know that small changes here and there in our everyday lives can make a big impact on the environment. We just need to know where to begin. That’s where Gilbert comes in, with this tongue-in-cheek reference guide packed full of helpful information, available at your fingertips. Read it cover to cover or just open it up to a random page; you can take what you want from it when you want. Whether you’ve got money to burn or have to crash on a friend’s couch, here are all of the eco-essentials to get the planet back on track, and you won’t have to hug a single tree—unless tree-hugging is your thing. Sharing the basics on health and beauty, work and money, home and gardening, family and fitness, and more, The Imperfect Environmentalist cuts through the clutter—both in our homes and in our heads—and offers simple approaches to help us clear out the pollutants, put down the poisons, and begin to breathe easy again—one 100% recycled page at a time. Advance praise for The Imperfect Environmentalist “This book really opened my eyes. Then my eyes started stinging and tearing from all the toxins in the environment I’m now aware of. Thanks, Sara, I have a lot to do now.”—Lisa Kudrow “Sara’s passion and commitment to the environment have given me an awareness that I never had before about our planet. I learn from Sara every day and she makes me want to be a better person. See, you can teach an old dog new tricks.”—Sharon Osbourne

Download or read book Proceedings of the 61st Conference of Metallurgists COM 2022 written by Metallurgy & Materials Soc. of CIM and published by Springer Nature. This book was released on 2023-01-05 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings represent the metallurgical engineering and materials science research presented at the 61st Annual Conference of Metallurgists. The collection themed ‘The Pathway to Net-Zero’ presents findings on a wide range of topics including: Processing of Critical Materials Towards Sustainable Circularity: Mining to Materials Deep Decarbonization Pathways for Pyrometallurgical Processes: Opportunities & Challenges Energy and Environmental Materials Light Metals for the Transportation Industry Advances in Materials Manufacturing VI – Existing and Emerging Materials Electrochemical Degradation of Multi-component Materials

Download or read book How to Prepare for Climate Change written by David Pogue and published by Simon & Schuster. This book was released on 2021-01-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and comprehensive guide to surviving the greatest disaster of our time, from New York Times bestselling self-help author and beloved CBS Sunday Morning science and technology correspondent David Pogue. You might not realize it, but we’re already living through the beginnings of climate chaos. In Arizona, laborers now start their day at 3 a.m. because it’s too hot to work past noon. Chinese investors are snapping up real estate in Canada. Millennials have evacuation plans. Moguls are building bunkers. Retirees in Miami are moving inland. In How to Prepare for Climate Change, bestselling self-help author David Pogue offers sensible, deeply researched advice for how the rest of us should start to ready ourselves for the years ahead. Pogue walks readers through what to grow, what to eat, how to build, how to insure, where to invest, how to prepare your children and pets, and even where to consider relocating when the time comes. (Two areas of the country, in particular, have the requisite cool temperatures, good hospitals, reliable access to water, and resilient infrastructure to serve as climate havens in the years ahead.) He also provides wise tips for managing your anxiety, as well as action plans for riding out every climate catastrophe, from superstorms and wildfires to ticks and epidemics. Timely and enlightening, How to Prepare for Climate Change is an indispensable guide for anyone who read The Uninhabitable Earth or The Sixth Extinction and wants to know how to make smart choices for the upheaval ahead.

Download or read book Solid State Metal Additive Manufacturing written by Hang Z. Yu and published by John Wiley & Sons. This book was released on 2024-07-10 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely summary of state-of-the-art solid-state metal 3D printing technologies, focusing on fundamental processing science and industrial applications Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications provides detailed and in-depth discussion on different solid-state metal additive manufacturing processes and applications, presenting associated methods, mechanisms and models, and unique benefits, as well as a detailed comparison to traditional fusion-based metal additive manufacturing. The text begins with a high-level overview of solid-state metal additive manufacturing with an emphasis on its position within the metal additive manufacturing spectrum and its potential for meeting specific demands in the aerospace, automotive, and defense industries. Next, each of the four categories of solid-state additive technologies—cold spray additive manufacturing, additive friction stir deposition, ultrasonic additive manufacturing, and sintering-based processes—is discussed in depth, reviewing advances in processing science, metallurgical science, and innovative applications. Finally, the future direction of these solid-state processes, especially the material innovation and artificial intelligence aspects, are discussed. Sample topics covered in Solid-State Metal Additive Manufacturing include: Physical processes and bonding mechanisms in impact-induced bonding and microstructures and microstructural evolution in cold sprayed materials Process fundamentals, dynamic microstructure evolution, and potential industrial applications of additive friction stir deposition Microstructural and mechanical characterization and industrial applications of ultrasonic additive manufacturing Principles of solid-state sintering, binder jetting-based metal printing, and sintering-based metal additive manufacturing methods for magnetic materials Critical issues inherent to melting and solidification, such as porosity, high residual stress, cast microstructure, anisotropic mechanical properties, and hot cracking Solid-State Metal Additive Manufacturing is an essential reference on the subject for academic researchers in materials science, mechanical, and biomedicine, as well as professional engineers in various manufacturing industries, especially those involved in building new additive technologies.

Download or read book Frattura ed Integrit Strutturale Annals 2012 written by Francesco Iacoviello and published by Gruppo Italiano Frattura. This book was released on 2012-10-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: