Download or read book Power Plant System Design written by Kam W. Li and published by John Wiley & Sons. This book was released on 1985 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the overall design of power plant systems, focusing on system rather than component design. Examines thermal aspects of systems and the desicions necessary to produce optimal power plant design. Includes appropriate computer methodology. Suitable for introductory courses in mechanical engineering.

Download or read book Large Scale Solar Power System Design GreenSource Books written by Peter Gevorkian and published by McGraw Hill Professional. This book was released on 2011-05-02 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive Guide to Large-Scale, Grid-Connected Solar Power System Design and Construction This GreenSource book provides comprehensive engineering design and construction guidelines for large-scale solar power system projects. Proven design methodologies are detailed installation diagrams are included in this practical resource. Large-Scale Solar Power System Design offers complete coverage of solar power system technologies and components, planning, cost estimates, financing, project management, safety, and testing. This authoritative guide fully addresses the complex technical and management issues associated with large-scale, grid-connected solar power system implementations. COVERAGE INCLUDES: Solar power system technologies, including photovoltaic and thin-film solar cells Solar power system physics Photovoltaic power system feasibility study Solar power system costing Solar power system design Large-scale solar power system construction Concentrator photovoltaic systems Solar power system project management Smart-grid systems Solar thermal power Solar power financing and feed-in tariff programs

Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2015-08-20 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plant: Design and Operation deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design. Its author has a 40-long association with thermal power plants in design as well as field engineering, sharing his experience with professional engineers under various training capacities, such as training programs for graduate engineers and operating personnel. Thermal Power Plant presents practical content on coal-, gas-, oil-, peat- and biomass-fueled thermal power plants, with chapters in steam power plant systems, start up and shut down, and interlock and protection. Its practical approach is ideal for engineering professionals. Focuses exclusively on thermal power, addressing some new frontiers specific to thermal plants Presents both technology and design aspects of thermal power plants, with special treatment on plant operating practices and troubleshooting Features a practical approach ideal for professionals, but can also be used to complement undergraduate and graduate studies

Download or read book Nuclear Power Plant Design and Analysis Codes written by Jun Wang and published by Woodhead Publishing. This book was released on 2020-11-10 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Power Plant Design and Analysis Codes: Development, Validation, and Application presents the latest research on the most widely used nuclear codes and the wealth of successful accomplishments which have been achieved over the past decades by experts in the field. Editors Wang, Li,Allison, and Hohorst and their team of authors provide readers with a comprehensive understanding of nuclear code development and how to apply it to their work and research to make their energy production more flexible, economical, reliable and safe.Written in an accessible and practical way, each chapter considers strengths and limitations, data availability needs, verification and validation methodologies and quality assurance guidelines to develop thorough and robust models and simulation tools both inside and outside a nuclear setting. This book benefits those working in nuclear reactor physics and thermal-hydraulics, as well as those involved in nuclear reactor licensing. It also provides early career researchers with a solid understanding of fundamental knowledge of mainstream nuclear modelling codes, as well as the more experienced engineers seeking advanced information on the best solutions to suit their needs. - Captures important research conducted over last few decades by experts and allows new researchers and professionals to learn from the work of their predecessors - Presents the most recent updates and developments, including the capabilities, limitations, and future development needs of all codes - Incudes applications for each code to ensure readers have complete knowledge to apply to their own setting

Download or read book Nuclear Power Plant Design Analysis written by Alexander Sesonske and published by . This book was released on 1973 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Construction of Nuclear Power Plants written by Rüdiger Meiswinkel and published by John Wiley & Sons. This book was released on 2013-04-10 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite all the efforts being put into expanding renewable energy sources, large-scale power stations will be essential as part of a reliable energy supply strategy for a longer period. Given that they are low on CO2 emissions, many countries are moving into or expanding nuclear energy to cover their baseload supply. Building structures required for nuclear plants whose protective function means they are classified as safety-related, have to meet particular construction requirements more stringent than those involved in conventional construction. This book gives a comprehensive overview from approval aspects given by nuclear and construction law, with special attention to the interface between plant and construction engineering, to a building structure classification. All life cycle phases are considered, with the primary focus on execution. Accidental actions on structures, the safety concept and design and fastening systems are exposed to a particular treatment. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.

Download or read book Electrical Systems for Nuclear Power Plants written by Dr. Omar S. Mazzoni and published by John Wiley & Sons. This book was released on 2018-10-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all aspects of electrical systems for nuclear power plants written by an authority in the field Based on author Omar Mazzoni's notes for a graduate level course he taught in Electrical Engineering, this book discusses all aspects of electrical systems for nuclear power plants, making reference to IEEE nuclear standards and regulatory documents. It covers such important topics as the requirements for equipment qualification, acceptance testing, periodic surveillance, and operational issues. It also provides excellent guidance for students in understanding the basis of nuclear plant electrical systems, the industry standards that are applicable, and the Nuclear Regulatory Commission's rules for designing and operating nuclear plants. Electrical Systems for Nuclear Power Plants offers in-depth chapters covering: elements of a power system; special regulations and requirements; unique requirements of a Class 1E power system; nuclear plants containment electrical penetration assemblies; on-site emergency AC sources; on-site emergency DC sources; protective relaying; interface of the nuclear plant with the grid; station blackout (SBO) issues and regulations; review of electric power calculations; equipment aging and decommissioning; and electrical and control systems inspections. This valuable resource: Evaluates industry standards and their relationship to federal regulations Discusses Class 1E equipment, emergency generation, the single failure criterion, plant life, and plant inspection Includes exercise problems for each chapter Electrical Systems for Nuclear Power Plants is an ideal text for instructors and students in electrical power courses, as well as for engineers active in operating nuclear power plants.

Download or read book Power Plant Engineering written by Larry Drbal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume provides a complete, authoritative, up-to-date reference for all aspects of power plant engineering. Coverage ranges from engineering economics to coal and limestone handling, from design processes to plant thermal heat balances. Both theory and practical applications are covered, giving engineers the information needed to plan, design, construct, upgrade, and operate power plants. Power Plant Engineering is the culmination of experience of hundreds of engineers from Black & Veatch, a leading firm in the field for more than 80 years. The authors review all major power generating technologies, giving particular emphasis to current approaches. Special features of the book include: * More than 1000 figures and lines drawings that illustrate all aspects of the subject. * Coverage of related components and systems in power plants such as turbine-generators, feedwater heaters, condenser, and cooling towers. * Definitions and analyses of the features of various plant systems. * Discussions of promising future technologies. Power Plant Engineering will be the standard reference in the professional engineer's library as the source of information on steam power plant generation. In addition, the clear presentation of the material will make this book suitable for use by students preparing to enter the field.

Download or read book Practical Power Plant Engineering written by Zark Bedalov and published by John Wiley & Sons. This book was released on 2020-01-24 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Power Plant Engineering offers engineers, new to the profession, a guide to the methods of practical design, equipment selection and operation of power and heavy industrial plants as practiced by experienced engineers. The author—a noted expert on the topic—draws on decades of practical experience working in a number of industries with ever-changing technologies. This comprehensive book, written in 26 chapters, covers the electrical activities from plant design, development to commissioning. It is filled with descriptive examples, brief equipment data sheets, relay protection, engineering calculations, illustrations, and common-sense engineering approaches. The book explores the most relevant topics and reviews the industry standards and established engineering practices. For example, the author leads the reader through the application of MV switchgear, MV controllers, MCCs and distribution lines in building plant power distribution systems, including calculations of interrupting duty for breakers and contactors. The text also contains useful information on the various types of concentrated and photovoltaic solar plants as well as wind farms with DFIG turbines. This important book: • Explains why and how to select the proper ratings for electrical equipment for specific applications • Includes information on the critical requirements for designing power systems to meet the performance requirements • Presents tests of the electrical equipment that prove it is built to the required standards and will meet plant-specific operating requirements Written for both professional engineers early in their career and experienced engineers, Practical Power Plant Engineering is a must-have resource that offers the information needed to apply the concepts of power plant engineering in the real world.

Download or read book Advanced Power Generation Systems written by Ibrahim Dincer and published by Academic Press. This book was released on 2014-07-15 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Power Generation Systems examines the full range of advanced multiple output thermodynamic cycles that can enable more sustainable and efficient power production from traditional methods, as well as driving the significant gains available from renewable sources. These advanced cycles can harness the by-products of one power generation effort, such as electricity production, to simultaneously create additional energy outputs, such as heat or refrigeration. Gas turbine-based, and industrial waste heat recovery-based combined, cogeneration, and trigeneration cycles are considered in depth, along with Syngas combustion engines, hybrid SOFC/gas turbine engines, and other thermodynamically efficient and environmentally conscious generation technologies. The uses of solar power, biomass, hydrogen, and fuel cells in advanced power generation are considered, within both hybrid and dedicated systems. The detailed energy and exergy analysis of each type of system provided by globally recognized author Dr. Ibrahim Dincer will inform effective and efficient design choices, while emphasizing the pivotal role of new methodologies and models for performance assessment of existing systems. This unique resource gathers information from thermodynamics, fluid mechanics, heat transfer, and energy system design to provide a single-source guide to solving practical power engineering problems. - The only complete source of info on the whole array of multiple output thermodynamic cycles, covering all the design options for environmentally-conscious combined production of electric power, heat, and refrigeration - Offers crucial instruction on realizing more efficiency in traditional power generation systems, and on implementing renewable technologies, including solar, hydrogen, fuel cells, and biomass - Each cycle description clarified through schematic diagrams, and linked to sustainable development scenarios through detailed energy, exergy, and efficiency analyses - Case studies and examples demonstrate how novel systems and performance assessment methods function in practice

Download or read book Engineering of Power Plant and Industrial Cooling Water Systems written by Charles F. Bowman and published by CRC Press. This book was released on 2021-08-23 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a reference to analysis techniques of common cooling water system problems and a historical perspective on solutions to chronic cooling water system problems, such as corrosion and biofouling. It covers best design practices for cooling water systems that are required to support the operation of all electric power plants. Plant engineers will gain better understanding of the practical issues associated with their cooling water systems and new designs or modifications of their systems should consider the actual challenges to the systems. The book is intended for graduate students and practicing engineers working in both nuclear and fossil power plants and industrial facilities that use large amounts of cooling water.

Download or read book Design of Solar Thermal Power Plants written by Zhifeng Wang and published by Academic Press. This book was released on 2019-02-22 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Solar Thermal Power Plants introduces the basic design methods of solar thermal power plants for technicians engaged in solar thermal power generation engineering. This book includes the author's theoretical investigation and study findings in solar heat concentrators, a performance evaluation of solar thermal collectors, a numerical simulation of the heat transfer process between complex geometrics, heat transfer through radiation, and more. Containing theoretical descriptions of solar concentrators and receivers, practical engineering examples, and detailed descriptions of site selections for solar thermal power plants, this book has a strong theoretical and practical value for readers. - Contains practical guidance and applications, making it more useful and user-friendly for CSP engineers - Includes theoretical investigation in solar heat concentrators, performance evaluation of solar thermal collectors, and the numerical simulation of heat transfer between complex geometrics with practical applications

Download or read book Virtual Power Plant System Integration Technology written by Chuzo Ninagawa and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on building air conditioning demand response and power storage batteries as the resources that make up the virtual power plant. The research and its outcomes presented in this book provide an overview of virtual power plant technology. The contents focus on both fundamentals and advanced topics such as role of central power supply control office, battery charge and discharge control system, power system simulation, system design for practical application, etc. This is a highly informative and carefully presented book, providing insight to students, engineers, and researchers in the field of power systems.

Download or read book Design and Optimization of Biogas Energy Systems written by Prashant Baredar and published by Academic Press. This book was released on 2020-06-18 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Optimization of Biogas Energy Systems presents an overview on planning, implementing, assessing and optimizing biogas systems, from fuel conversion to power generation. The book introduces the fundamental elements of bioenergy systems, highlighting the specificities of biogas systems. It discusses the current state of their adoption at a global level and the challenges faced by designers and operators. Methods for sizing, simulating and modeling are discussed, including prefeasibility analysis, available production processes, integration into hybrid energy systems, and the application of Big Data analysis and game theory concepts. All chapters include real-life examples and exercises to illustrate the topics being covered. The book goes beyond theory to offer practical knowledge of methods to reach solutions to key challenges in the field. This is a valuable resource for researchers, practitioners and graduate students interested in developing smart, reliable and sustainable biogas technologies. - Provides an applied approach to biogas systems, from technology fundamentals, to economic and environmental assessment - Explores control methods and reliability prediction of each system component, including modeling and simulation with HOMER and MATLAB - Discusses the use of Big Data analysis, numerical methods, and Game Theory for plant assessment

Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants.After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems.With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. - Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants - Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems - Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems

Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2016-08-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plants: Pre-Operational Activities covers practical information that can be used as a handy reference by utility operators and professionals working in new and existing plants, including those that are undergoing refurbishments and those that have been shut for long periods of time. It is fully comprehensive, including chapters on flushing boiler systems, various methods of testing steam generators, and the drying out of generators. This book will be invaluable for anyone working on the startup, commissioning, and operation of thermal power plants. It is also a great companion book to Sarkar's Thermal Power Plant: Design and Operation. Sarkar has worked with thermal power plants for over 40 years, bringing his experience in design and operations to help new and experienced practicing engineers perform effective pre-operational activities. - Consolidates all pre-operational aspects of thermal power plants - Explains how to handle equipment safely and work efficiently - Provides guidance for new and existing power plants to help reduce outage time and save on budgets

Download or read book Power Systems and Renewable Energy written by Gary D. Price and published by Momentum Press. This book was released on 2014-07-31 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar and wind energy systems have flourished throughout the United States in the last few years as the public calls for reduced dependence on foreign oil. This has stimulated the growth of an industry that provides wind and solar systems, and many small businesses have sprung up to install these systems. Training programs and courses are now ubiquitous as the demand for designers and installers increases. This book provides a resource for engineering students interested in the design and operation of solar electric, solar thermal, wind, and other renewable systems. While there are many good reference books on power systems and renewable energy, this book integrates the engineering basics of existing power systems with design problems and solutions using renewable energy sources. The author includes chapters on concepts and background review. Details of photovoltaic and wind systems as interconnected or stand-alone designs, estimating and predicting energy production using industry distribution functions and online programs, and concepts of temperature coefficients, synchronization, power conversion, and system protection are explained and illustrated. The book is a very “hands-on” practical guide, structured to motivate you to experience the design and installation process.