Download or read book Power Generation Handbook written by Philip Kiameh and published by McGraw Hill Professional. This book was released on 2002-08-28 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: We’ve all lived through long hot summers with power shortages, brownouts, and blackouts. But at last, all the what-to-do and how-to-do it information you’ll need to handle a full range of operation and maintenance tasks at your fingertips. Written by a power industry expert, Power Generation Handbook: Selection, Applications, Operation, Maintenance helps you to gain a thorough understanding of all components, calculations, and subsystems of the various types of gas turbines, steam power plants, co-generation, and combined cycle plants. Divided into five sections, Power Generation Handbook: Selection, Applications, Operation, Maintenance provides a thorough understanding of co-generation and combined cycle plants. Each of the components such as compressors, gas and steam turbines, heat recovery steam generators, condensers, lubricating systems, transformers, and generators are covered in detail. The selection considerations, operation, maintenance and economics of co-generation plants and combined cycles as well as emission limits, monitoring and governing systems will also be covered thoroughly. This all-in-one resource gives you step-by-step guidance on how to maximize the efficiency, reliability and longevity of your power generation plant.

Download or read book Coal Fired Power Generation Handbook written by James G. Speight and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal accounts for approximately one quarter of world energy consumption and of the coal produced worldwide approximately 65% is shipped to electricity producers and 33% to industrial consumers, with most of the remainder going to consumers in the residential and commercial sectors. The total share of total world energy consumption by coal is expected to increase to almost 30% in 2035. This book describes the challenges and steps by which electricity is produced form coal and deals with the challenges for removing the environmental objections to the use of coal in future power plants. New technologies are described that could virtually eliminate the sulfur, nitrogen, and mercury pollutants that are released when coal is burned for electricity generation. In addition, technologies for the capture greenhouse gases emitted from coal-fired power plants are described and the means of preventing such emissions from contributing to global warming concerns. Written by one of the world’s leading energy experts, this volume is a must-have for any engineer, scientist, or student working in this field, providing a valuable reference and guide in a quickly changing field.

Download or read book Energy and Power Generation Handbook written by K. R. Rao and published by American Society of Mechanical Engineers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers aspects of power generation from all known sources of energy that are in use around the globe. It contains power and energy sources such as solar, wind, hydro, tidal and wave power, bio energy including bio-mass and bio-fuels, waste-material, geothermal, fossil, petroleum, gas and nuclear. Experts were also invited to cover the role of nano-technology and the role of NASA in photovoltaic and wind energy in power generation.

Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

Download or read book Power Generation Handbook 2 E written by Philip Kiameh and published by McGraw Hill Professional. This book was released on 2011-10-28 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE DEFINITIVE GUIDE TO POWER GENERATION--FULLY REVISED Updated throughout to cover the latest technologies and applications, Power Generation Handbook, Second Edition, focuses on the basics of power generation using gas turbine, steam, wind, solar, co-generation, and combined-cycle power plants. Other essential topics such as calculations, efficient plant design, emission limits, monitoring, and the economics of power generation are discussed in detail. A real-world case study illustrates the material presented in this authoritative resource. Coverage includes: All components and subsystems of the various types of gas turbine, steam power, co-generation, combined-cycle, wind turbine, solar power, and generator plants Advantages, applications, performance, and economics of low-emission, high-efficiency power plants Selection, operation, and maintenance of gas turbines, steam turbines, valves, compressors, governing systems, combustors, de-aerators, feedwater heaters, transformers, generators, wind turbines and generators, and solar power stations Monitoring and control of all power station environmental emissions Power station performance monitoring and performance enhancement options

Download or read book Handbook for Cogeneration and Combined Cycle Power Plants written by Meherwan P. Boyce and published by American Society of Mechanical Engineers. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the aspects of power plant design, operation, and maintenance. This title discusses cycle optimization and reliability, technical details on sizing, plant layout, fuel selection, types of drives, and performance characteristics of the major components in a cogeneration or combined cycle power plant.

Download or read book Handbook of Generation IV Nuclear Reactors written by Igor Pioro and published by Woodhead Publishing. This book was released on 2022-12-07 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Generation IV Nuclear Reactors, Second Edition is a fully revised and updated comprehensive resource on the latest research and advances in generation IV nuclear reactor concepts. Editor Igor Pioro and his team of expert contributors have updated every chapter to reflect advances in the field since the first edition published in 2016. The book teaches the reader about available technologies, future prospects and the feasibility of each concept presented, equipping them users with a strong skillset which they can apply to their own work and research. - Provides a fully updated, revised and comprehensive handbook dedicated entirely to generation IV nuclear reactors - Includes new trends and developments since the first publication, as well as brand new case studies and appendices - Covers the latest research, developments and design information surrounding generation IV nuclear reactors

Download or read book Electric Power Generation Transmission and Distribution written by Leonard L. Grigsby and published by CRC Press. This book was released on 2018-09-03 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from worldwide leaders in the field, the carefully crafted Electric Power Generation, Transmission, and Distribution, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) provides convenient access to detailed information on a diverse array of power engineering topics. Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. Topics covered include: Electric power generation: nonconventional methods Electric power generation: conventional methods Transmission system Distribution systems Electric power utilization Power quality L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Saifur Rahman, Rama Ramakumar, George Karady, Bill Kersting, Andrew Hanson, and Mark Halpin present substantially new and revised material, giving readers up-to-date information on core areas. These include advanced energy technologies, distributed utilities, load characterization and modeling, and power quality issues such as power system harmonics, voltage sags, and power quality monitoring. With six new and 16 fully revised chapters, the book supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. New chapters cover: Water Transmission Line Reliability Methods High Voltage Direct Current Transmission System Advanced Technology High-Temperature Conduction Distribution Short-Circuit Protection Linear Electric Motors A volume in the Electric Power Engineering Handbook, Third Edition. Other volumes in the set: K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (ISBN: 9781439883204) K12650 Electric Power Substations Engineering, Third Edition (ISBN: 9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (ISBN: 9781439856291)

Download or read book Standard Handbook of Powerplant Engineering written by Thomas C. Elliott and published by McGraw Hill Professional. This book was released on 2012-09-17 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this new edition of a classic resource provides powerplant engineers with a full range of information from basic operations to leading-edge technologies, including steam generation, turbines and diesels, fuels and fuel handling, pollution control, plant electrical systems, and instrumentation and control. New material covers various energy resources for power generation, nuclear plant systems, hydroelectric power stations, alternative and cogeneration energy plants, and environmental controls. With over 600 drawings, diagrams, and photographs, it offers engineers and technicians the information needed to keep powerplants operating smoothly into the 21st century.

Download or read book Handbook of Power System Engineering written by Yoshihide Hase and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining the reliable and efficient generation, transmission and distribution of electrical power is of the utmost importance in a world where electricity is the inevitable means of energy acquisition, transportation, and utilization, and the principle mode of communicating media. Our modern society is entirely dependent on electricity, so problems involving the continuous delivery of power can lead to the disruption and breakdown of vital economic and social infrastructures. This book brings together comprehensive technical information on power system engineering, covering the fundamental theory of power systems and their components, and the related analytical approaches. Key features: Presents detailed theoretical explanations of simple power systems as an accessible basis for understanding the larger, more complex power systems. Examines widely the theory, practices and implementation of several power sub-systems such as generating plants, over-head transmission lines and power cable lines, sub-stations, including over-voltage protection, insulation coordination as well as power systems control and protection. Discusses steady-state and transient phenomena from basic power-frequency range to lightning- and switching-surge ranges, including system faults, wave-form distortion and lower-order harmonic resonance. Explains the dynamics of generators and power systems through essential mathematical equations, with many numerical examples. Analyses the historical progression of power system engineering, in particular the descriptive methods of electrical circuits for power systems. Written by an author with a wealth of experience in the field, both in industry and academia, the Handbook of Power System Engineering provides a single reference work for practicing engineers, researchers and those working in industry that want to gain knowledge of all aspects of power systems. It is also valuable for advanced students taking courses or modules in power system engineering.

Download or read book Handbook of Distributed Generation written by Ramesh Bansal and published by Springer. This book was released on 2017-03-07 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features extensive coverage of all Distributed Energy Generation technologies, highlighting the technical, environmental and economic aspects of distributed resource integration, such as line loss reduction, protection, control, storage, power electronics, reliability improvement, and voltage profile optimization. It explains how electric power system planners, developers, operators, designers, regulators and policy makers can derive many benefits with increased penetration of distributed generation units into smart distribution networks. It further demonstrates how to best realize these benefits via skillful integration of distributed energy sources, based upon an understanding of the characteristics of loads and network configuration.

Download or read book Handbook of Wind Power Systems written by Panos M. Pardalos and published by Springer Science & Business Media. This book was released on 2014-01-15 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind power is currently considered as the fastest growing energy resource in the world. Technological advances and government subsidies have contributed in the rapid rise of Wind power systems. The Handbook on Wind Power Systems provides an overview on several aspects of wind power systems and is divided into four sections: optimization problems in wind power generation, grid integration of wind power systems, modeling, control and maintenance of wind facilities and innovative wind energy generation. The chapters are contributed by experts working on different aspects of wind energy generation and conversion.

Download or read book Electrical Power Engineering Reference Applications Handbook written by K.C.Agrawal and published by BecomeShakespeare.com. This book was released on 2020-11-10 with total page 2552 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOME UNIQUE FEATURES Special thrust on energy conservation, pollution control and space saving in consonance with the latest global requirements • Special Coverage on earthquake engineering and tsunami Seismic testing of critical machines . In all there are 32 Chapters and 2 Appendices. Each chapter is very interesting and full of rare Information . The book contains 5 parts and each part is a mini-encyclopedia on the subjects covered • Many topics are research work of the author and may have rare information not available in most works available in the market. Tables of all relevant and equivalent Standards IEC, BS, ANSI, NEMA, IEEE and IS at the end of each chapter is a rare feature APPLICATIONS OF THE HANDBOOK For professionals and practising engineers: As a reference handbook for all professionals and practising engineers associated with design, engineering, production, quality assurance, protection and testing. • Project engineering, project design and project Implementation A very useful book for every industry for selection, Installation and maintenance of electrical machines. . For practising engineers. It would be like keeping a gospel by their sides. For Inhouse training programmes: . Unique handbook for inhouse training courses for Industries, power generating, transmission and distribution organizations For students and research scholars : As a reference textbook for all electrical engineering students in the classrooms and during practical training. It can bridge the gap between the theory of the classroom and the practice in the field. A highly recommended book for all engineering colleges worldwide, right from 1st year through final year. It will prove to be a good guide during higher studies and research activities Subjects like Earthquake Engineering, Intelligent Switchgears, SCADA Power Systems, Surges. Temporary Over Voltage, Surge Protection, Reactive Power Control and Bus Systems etc. are some pertinent topics that can form the basis of their higher studies and research work . The book shall help in technological and product development and give a fresh Impetus to R&D.

Download or read book Large Energy Storage Systems Handbook written by Frank S. Barnes and published by CRC Press. This book was released on 2011-03-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the current push to convert to renewable sources of energy, many issues raised years ago on the economics and the difficulties of siting energy storage are once again being raised today. When large amounts of wind, solar, and other renewable energy sources are added to existing electrical grids, efficient and manageable energy storage becomes a

Download or read book Handbook of Power Quality written by Angelo Baggini and published by John Wiley & Sons. This book was released on 2008-07-31 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the complexity of power systems combined with other factors such as increasing susceptibility of equipment, power quality (PQ) is apt to waver. With electricity in growing demand, low PQ is on the rise and becoming notoriously difficult to remedy. It is an issue that confronts professionals on a daily basis, but few have the required knowledge to diagnose and solve these problems. Handbook of Power Quality examines of the full panorama of PQ disturbances, with background theory and guidelines on measurement procedures and problem solving. It uses the perspectives of both power suppliers and electricity users, with contributions from experts in all aspects of PQ supplying a vital balance of scientific and practical information on the following: frequency variations; the characteristics of voltage, including dips, fluctuations and flicker; the continuity and reliability of electricity supply, its structure, appliances and equipment; the relationship of PQ with power systems, distributed generation, and the electricity market; the monitoring and cost of poor PQ; rational use of energy. An accompanying website hosts case studies for each chapter, demonstrating PQ practice; how problems are identified, analysed and resolved. The website also includes extensive appendices listing the current standards, mathematical formulas, and principles of electrical circuits that are critical for the optimization of solutions. This comprehensive handbook explains PQ methodology with a hands-on approach that makes it essential for all practising power systems engineers and researchers. It simultaneously acts as a reference for electrical engineers and technical managers who meet with power quality issues and would like to further their knowledge in this area.

Download or read book Electric Generators Handbook Two Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2018-10-08 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Generators Handbook, Second Edition: Two-Volume Set supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs. The first volume, Synchronous Generators, explores large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds coverage of high-power wind generators with fewer or no PMs, PM-assisted DC-excited salient pole synchronous generators, autonomous synchronous generators’ control, line switching parameter identification for isolated grids, synthetic back-to-back load testing with inverter supply, and more. The second volume, Variable Speed Generators, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds material on doubly fed induction generator control under unbalanced voltage sags and nonlinear loads, interior permanent magnet claw-pole-alternator systems, high power factor Vernier PM generators, PM-assisted reluctance synchronous motors/generators for electric hybrid vehicles, and more.

Download or read book Electrical Power Engineering written by Henslay William Kabisama and published by McGraw-Hill Companies. This book was released on 1993 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable introduction to key concepts in electric power engineering for both entry-level and seasoned professionals. Table of Contents: 1. Energy Sources and Electric Power; 2. Magnetic Fields and Magnetic Circuits; 3. The Power Transformer; 4. Synchronous Machines; 5. D.C. Machines; 6. Induction Machines; 7. The Electric Power System Network; Appendix: Complex Numbers, Phasors, Impedances, and Polyphase Circuits. 200 illustrations.