Download or read book Power Estimation on Electronic System Level using Linear Power Models written by Stefan Schuermans and published by Springer. This book was released on 2018-12-14 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a flexible and largely automated methodology for adding the estimation of power consumption to high level simulations at the electronic system level (ESL). This method enables the inclusion of power consumption considerations from the very start of a design. This ability can help designers of electronic systems to create devices with low power consumption. The authors also demonstrate the implementation of the method, using the popular ESL language “SystemC”. This implementation enables most existing SystemC ESL simulations for power estimation with very little manual work. Extensive case-studies of a Network on Chip communication architecture and a dual-core application processor “ARM Cortex-A9” showcase the applicability and accuracy of the method to different types of electronic devices. The evaluation compares various trade-offs regarding amount of manual work, types of ESL models, achieved estimation accuracy and impact on the simulation speed. Describes a flexible and largely automated ESL power estimation method; Shows implementation of power estimation methodology in SystemC; Uses two extensive case studies to demonstrate method introduced.

Download or read book Transaction Level Power Modeling written by Amr Baher Darwish and published by Springer. This book was released on 2019-08-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers a methodology for dynamic power estimation, using Transaction Level Modeling (TLM). The methodology exploits the existing tools for RTL simulation, design synthesis and SystemC prototyping to provide fast and accurate power estimation using Transaction Level Power Modeling (TLPM). Readers will benefit from this innovative way of evaluating power on a high level of abstraction, at an early stage of the product life cycle, decreasing the number of the expensive design iterations.

Download or read book Architecture of Computing Systems ARCS 2020 written by André Brinkmann and published by Springer Nature. This book was released on 2020-07-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 33rd International Conference on Architecture of Computing Systems, ARCS 2020, held in Aachen, Germany, in May 2020.* The 12 full papers in this volume were carefully reviewed and selected from 33 submissions. 6 workshop papers are also included. ARCS has always been a conference attracting leading-edge research outcomes in Computer Architecture and Operating Systems, including a wide spectrum of topics ranging from embedded and real-time systems all the way to large-scale and parallel systems. The selected papers focus on concepts and tools for incorporating self-adaptation and self-organization mechanisms in high-performance computing systems. This includes upcoming approaches for runtime modifications at various abstraction levels, ranging from hardware changes to goal changes and their impact on architectures, technologies, and languages. *The conference was canceled due to the COVID-19 pandemic.

Download or read book Low Power Design with High Level Power Estimation and Power Aware Synthesis written by Sumit Ahuja and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel research techniques, algorithms, methodologies and experimental results for high level power estimation and power aware high-level synthesis. Readers will learn to apply such techniques to enable design flows resulting in shorter time to market and successful low power ASIC/FPGA design.

Download or read book Complete range Activity based RTL Power Estimation written by and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, power consumption has become a major concern in the electronic industry. Power reduction can be accelerated in the design cycle by fast and accurate power estimation tools. Since the units of lower-levels of design abstraction are transistors or gates, power estimation becomes a slow process at these levels. Therefore designers need to have tools for fast and accurate power estimation at the higher levels of design abstraction such as register transfer level (RTL). A novel RTL power estimation technique called CRAB-RPE will be presented in this thesis. The CRAB power model is built upon four important properties which most of the previous RTL models did not support at the same time. First, the model is based solely on the first and second-order primary input bit-level transition probabilities which provide detailed information about the primary input bit activity dependency of the circuit. Second, the model is based on the power characterization of a microarchitecture library with a complete range of primary input bit transition probabilities without any assumptions about this activity. Third, the pairwise spatial correlations of the primary input nodes are considered by including second-order crossterms of the primary input switching probabilities. Fourth, the first-order temporal correlations of the primary input bits are considered by including 1 to 1 and binary switching transition probabilities. With the proposed model, fast power estimation can be achieved from input bit-level statistics without further simulation. The model was evaluated using the ISCAS combinational circuit benchmarks and other commonly used micro-architectural circuit blocks. Second-order terms were observed to be important for modeling the low bit activity effects on power dissipation. The CRAB power model returned under 5% of the low-level simulator estimates for either biased single, pair PIN statistics or uniform white noise, DBT-like data.

Download or read book Integrated Circuit Design Power and Timing Modeling Optimization and Simulation written by Dimitrios Soudris and published by Springer Science & Business Media. This book was released on 2000-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nebel (OFFISResearchInstitute,Oldenburg,Germany) RTL Estimation of Steering Logic Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 C. Anton,P. Civera,I. Colonescu,E. Macii,M. Poncino (PolytechnicalUniversityofTorino,Italy) A. Bogliolo(UniversityofFerrara,Italy) PowerEstimationandOptimization Reducing Power Consumption through Dynamic Frequency Scaling for a Class of Digital Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 N. D. Zervas,S. Theoharis,A. P. Kakaroudas,G. Theodoridis, C. E. Goutis(UniversityofPatras,Greece) D.

Download or read book Machine Learning Applications in Electronic Design Automation written by Haoxing Ren and published by Springer Nature. This book was released on 2023-01-01 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book serves as a single-source reference to key machine learning (ML) applications and methods in digital and analog design and verification. Experts from academia and industry cover a wide range of the latest research on ML applications in electronic design automation (EDA), including analysis and optimization of digital design, analysis and optimization of analog design, as well as functional verification, FPGA and system level designs, design for manufacturing (DFM), and design space exploration. The authors also cover key ML methods such as classical ML, deep learning models such as convolutional neural networks (CNNs), graph neural networks (GNNs), generative adversarial networks (GANs) and optimization methods such as reinforcement learning (RL) and Bayesian optimization (BO). All of these topics are valuable to chip designers and EDA developers and researchers working in digital and analog designs and verification.

Download or read book A Survey of Electronic System Level Based Power Estimation Techniques for Arbitary Logic and Processors written by Nihar Shrikant Bendre and published by . This book was released on 2015 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power estimation of chips is imperative. To meet the low power requirements amid the configuration of new chip, power consumption has be regarded officially during the configuration of new chip. Electronic System Level (ESL) outline methodologies permit engineers to achieve design improvements on the latest designs more rapidly, efficient and economical than with customary RTL approach, by prototyping, debugging and analyzing complicated design systems before the RTL stage. This report presents a novel idea of surveying of the existing power estimation techniques at ESL level for arbitrary logic and processors.

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Jorge Juan Chico and published by Springer. This book was released on 2003-10-02 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the proceedings of PATMOS 2003. This was the 13th in a series of international workshops held in several locations in Europe. Over the years, PATMOS has gained recognition as one of the major European events devoted to power and timing aspects of integrated circuit and system design. Despite its signi?cant growth and development, PATMOS can still be considered as a very informal forum, featuring high-level scienti?c presentations together with open discussions and panel sessions in a free and relaxed environment. This year, PATMOS took place in Turin, Italy, organized by the Politecnico di Torino, with technical co-sponsorship from the IEEE Circuits and Systems Society and the generous support of the European Commission, as well as that of several industrial sponsors, including BullDAST, Cadence, Mentor Graphics, STMicroelectronics, and Synopsys. The objective of the PATMOS workshop is to provide a forum to discuss and investigate the emerging problems in methodologies and tools for the design of new generations of integrated circuits and systems. A major emphasis of the technical program is on speed and low-power aspects, with particular regard to modeling, characterization, design, and architectures.

Download or read book Management Information And Optoelectronic Engineering Proceedings Of The 2016 International Conference written by Yongsheng Gao and published by World Scientific. This book was released on 2017-03-14 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together 59 selected articles presented at the joint conferences of the International Conference on Management, Information and Communication (ICMIC2016) and the International Conference on Optics and Electronics Engineering (ICOEE2016), which were held in Guilin, China, during May 28-29, 2016.ICMIC2016 and ICOEE2016 provide a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their latest findings and results in the development in Information Management, Communication, Optics and Electronics host by ICMIC2016 and ICOEE2016.The proceedings collected the latest research results and applications in the related areas. We hope to enlighten readers with some latest developments in Information Management, and Optics Electronics presented at the joint conferences.

Download or read book Languages Design Methods and Tools for Electronic System Design written by Frank Oppenheimer and published by Springer. This book was released on 2015-12-11 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a selection of the best papers from the seventeenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on October 14-16, 2014, in Munich, Germany. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.

Download or read book The VLSI Handbook written by Wai-Kai Chen and published by CRC Press. This book was released on 2019-07-17 with total page 1788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the years, the fundamentals of VLSI technology have evolved to include a wide range of topics and a broad range of practices. To encompass such a vast amount of knowledge, The VLSI Handbook focuses on the key concepts, models, and equations that enable the electrical engineer to analyze, design, and predict the behavior of very large-scale integrated circuits. It provides the most up-to-date information on IC technology you can find. Using frequent examples, the Handbook stresses the fundamental theory behind professional applications. Focusing not only on the traditional design methods, it contains all relevant sources of information and tools to assist you in performing your job. This includes software, databases, standards, seminars, conferences and more. The VLSI Handbook answers all your needs in one comprehensive volume at a level that will enlighten and refresh the knowledge of experienced engineers and educate the novice. This one-source reference keeps you current on new techniques and procedures and serves as a review for standard practice. It will be your first choice when looking for a solution.

Download or read book Advances in Electric Power and Energy written by Mohamed E. El-Hawary and published by John Wiley & Sons. This book was released on 2021-03-03 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the role of static state estimation in the mitigation of potential system failures With contributions from a noted panel of experts on the topic, Advances in Electric Power and Energy: Static State Estimation addresses the wide-range of issues concerning static state estimation as a main energy control function and major tool for evaluating prevailing operating conditions in electric power systems worldwide. This book is an essential guide for system operators who must be fully aware of potential threats to the integrity of their own and neighboring systems. The contributors provide an overview of the topic and review common threats such as cascading black-outs to model-based anomaly detection to the operation of micro-grids and much more. The book also includes a discussion of an effective mathematical programming approach to state estimation in power systems. Advances in Electric Power and Energy reviews the most recent developments in the field and: Offers an introduction to the topic to help non-experts (and professionals) get up-to-date on static state estimation Covers the essential information needed to understand power system state estimation written by experts on the subject Discusses a mathematical programming approach Written for electric power system planners, operators, consultants, power system software developers, and academics, Advances in Electric Power and Energy is the authoritative guide to the topic with contributions from experts who review the most recent developments.

Download or read book Power Integrity Modeling and Design for Semiconductors and Systems written by Madhavan Swaminathan and published by Prentice-Hall PTR. This book was released on 2008 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Madhavan Swaminathanreceived his B.E. in Electronics and Communication from Regional Engineering College, Tiruchirapalli in 1985 and his M.S. and Ph.D. degrees in Electrical Engineering from Syracuse University in 1989 and 1991, respectively. He is currently the Joseph M. Pettit Professor in Electronics in the School of Electrical and Computer Engineering and Deputy Director of the Packaging Research Center, Georgia Tech. He is also the cofounder of Jacket Micro Devices, a company specializing in RF modules for wireless applications. Prior to joining Georgia Tech he was with IBM where he worked on packaging for super computers. His work on Power Integrity has won several awards and he was made an IEEE Fellow for his contributions in this area. Ege Enginreceived his B.S. and M.S. degrees in electrical engineering from Middle East Technical University, Ankara, Turkey, and from University of Paderborn, Germany. From 2001 to 2004 he was with the Fraunhofer-Institute for Reliability and Microintegration in Berlin. During this time he also received his Ph.D. from the University of Hannover, Germany. He is currently a Research Engineer in the School of Electrical and Computer Engineering and an Assistant Research Director of the Packaging Research Center at Georgia Tech. He has more than 40 publications in refereed journals and conferences in the areas of signal and power integrity modeling and simulation. The First Comprehensive, Example-Rich Guide to Power Integrity Modeling Professionals need to thoroughly understand signal and power integrity issues in order to successfully design packages and boards for high-speed systems. Now, for the first time, there's a complete guide to power integrity modeling: everything you need to know, from the basics through the state of the art. Using realistic case studies and downloadable software examples, two leading experts demonstrate today's best techniques for designing and modeling interconnects to efficiently distribute power and minimize noise. The authors carefully introduce the core concepts of power distribution design, systematically present and compare leading techniques for modeling noise, and link these techniques to specific applications. Their many examples range from the simplest (using analytical equations to compute power supply noise) through complex system-level applications. The authors Introduce power delivery network components, analysis, high-frequency measurement, and modeling requirements Thoroughly explain plane modeling, including plane behavior, lumped modeling, distributed circuit-based approaches, and much more Offer in-depth coverage of simultaneous switching noise, including modeling for time- and frequency-domain analysis Introduce three leading time domain simulation methods: rational function methods, signal flow graphs, and MNA Present these and other advanced case studies: high-speed servers, high-speed differential signaling, chip package analysis, embedded decoupling capacitors, and electromagnetic bandgap structures This book's system-level focus and practical examples will make it indispensable for every professional concerned with power integrity, including electrical engineers, system designers, signal integrity engineers, and materials scientists. It will also be valuable to developers building software that takes advantage of high-speed systems. During my (M.S) undergraduate days in a little town called Tiruchirapalli in Southern India, we used to have frequent voltage and current surges that knocked out all the electrical equipment such as fans and lights in our rooms. Frustrated, my friend once remarked, "We are Powerless to solve the Current problem." Of course, he meant this in jest, but little did I realize that this would become the theme of my research for many years. Though my area is on Semiconductors and computer system

Download or read book Power System Dynamic Modelling and Analysis in Evolving Networks written by Babak Badrzadeh and published by Springer Nature. This book was released on with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Power Electronics and Interfacing Energy Conversion Systems written by M. Godoy Simoes and published by John Wiley & Sons. This book was released on 2016-09-16 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work. Discusses the mathematical formulation of system equations for energy systems and power electronics aiming state-space and circuit oriented simulations Studies the interactions between MATLAB and Simulink models and functions with real-world implementation using microprocessors and microcontrollers Presents numerical integration techniques, transfer-function modeling, harmonic analysis and power quality performance assessment Examines existing software such as, MATLAB/Simulink, Power Systems Toolbox and PSIM to simulate power electronic circuits including the use of renewable energy sources such as wind and solar sources The simulation files are available for readers who register with the Google Group: power-electronics-interfacing-energy-conversion-systems@googlegroups.com. After your registration you will receive information in how to access the simulation files, the Google Group can also be used to communicate with other registered readers of this book.

Download or read book Modelling and Simulation of Power Electronic Converter Dominated Power Systems in PowerFactory written by Francisco M. Gonzalez-Longatt and published by Springer Nature. This book was released on 2021 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of power electronic converters for numerical simulations based on DIgSILENT PowerFactory. It covers the working principles, key assumptions and implementation of models of different types of these power systems. The book is divided into three main parts: the first discusses high-voltage direct currents, while the second part examines distribution systems and micro-grids. Lastly, the third addresses the equipment and technologies used in modelling and simulation. Each chapter includes practical examples and exercises, and the accompanying software illustrates essential models, principles and performance using DIgSILENT PowerFactory. Exploring various current topics in the field of modelling power systems, this book will appeal to a variety of readers, ranging from students to practitioners.