Download or read book Power Electronic Systems written by Jai P. Agrawal and published by . This book was released on 2001 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: References. Problems. IV. POWER ELECTRONIC APPLICATION SYSTEMS. 12. Electric Utility Interface: Power Factor Correction and Static Var Control. Introduction. Electric Utility Distribution System. Passive Filtering. Active Current Shaping: Power Factor Correction. Interface for Bidirectional Power Flow. 3-Phase Utility Interface. Static VAR Compensators. Summary. References. Problems. 13. Converter Control. Introducion. Averaged Model. Linearized Model. State-Space Averaged Model. Feedback Control. Summary. References. Problems. 14. Applications I: Power Supply and.... Introduction. DC Power Supply System. Control of Switch-Mode DC Power Supplies. Protection of DC Power Supplies. Electrical Isolation. Equivalent Series Resistance (ESR). Synchronous Rectifiers. Cross Regulation in Multiple Outputs. Battery Charging Systems. Uninterruptible (AC) Power Supply (UPS). Electronic Lamp Ballast. Induction Heating. Switch-Mode Welding. Electromagnetic Interference Considerations. Summary. References. Problems. 15. Applications II: Motor Drives. Introduction. DC Motor Drives. Induction Motor Drives. Synchronous Motor Drives. Summary. References. Problems. 16. Temperature Control, Protection, and Packaging. Introduction. Temperature Control in Semiconductor Devices. Heat Transfer Basics. Heat Transfer Systems. Static Thermal Model of Heat Transfer Systems. Transient Thermal Impedance. Heat Sink. Surge Voltage Protection. Fault Current Protection. Circuit Layout Techniques. Summary. References. Problems. Appendix A. Review of Basic Principles. Basic Mathematical Methods. Energy and Power. PSpice Simulation. Appendix B. Electromagnetics. Appendix C. Semiconductor Basics. Charge Transport in Homogenous-Structure Semiconductor Devices. Heterogeneous-Structure Devices. Appendix D. Appendix E. Appendix F. Index.

Download or read book Transformers and Inductors for Power Electronics written by W.G. Hurley and published by John Wiley & Sons. This book was released on 2013-02-21 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the fundamentals of electromagnetics, this clear and concise text explains basic and applied principles of transformer and inductor design for power electronic applications. It details both the theory and practice of inductors and transformers employed to filter currents, store electromagnetic energy, provide physical isolation between circuits, and perform stepping up and down of DC and AC voltages. The authors present a broad range of applications from modern power conversion systems. They provide rigorous design guidelines based on a robust methodology for inductor and transformer design. They offer real design examples, informed by proven and working field examples. Key features include: emphasis on high frequency design, including optimisation of the winding layout and treatment of non-sinusoidal waveforms a chapter on planar magnetic with analytical models and descriptions of the processing technologies analysis of the role of variable inductors, and their applications for power factor correction and solar power unique coverage on the measurements of inductance and transformer capacitance, as well as tests for core losses at high frequency worked examples in MATLAB, end-of-chapter problems, and an accompanying website containing solutions, a full set of instructors’ presentations, and copies of all the figures. Covering the basics of the magnetic components of power electronic converters, this book is a comprehensive reference for students and professional engineers dealing with specialised inductor and transformer design. It is especially useful for senior undergraduate and graduate students in electrical engineering and electrical energy systems, and engineers working with power supplies and energy conversion systems who want to update their knowledge on a field that has progressed considerably in recent years.

Download or read book Fundamentals of Power Electronics written by Robert W. Erickson and published by Springer Nature. This book was released on 2020-07-14 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Power Electronics, Third Edition, is an up-to-date and authoritative text and reference book on power electronics. This new edition retains the original objective and philosophy of focusing on the fundamental principles, models, and technical requirements needed for designing practical power electronic systems while adding a wealth of new material. Improved features of this new edition include: new material on switching loss mechanisms and their modeling; wide bandgap semiconductor devices; a more rigorous treatment of averaging; explanation of the Nyquist stability criterion; incorporation of the Tan and Middlebrook model for current programmed control; a new chapter on digital control of switching converters; major new chapters on advanced techniques of design-oriented analysis including feedback and extra-element theorems; average current control; new material on input filter design; new treatment of averaged switch modeling, simulation, and indirect power; and sampling effects in DCM, CPM, and digital control. Fundamentals of Power Electronics, Third Edition, is intended for use in introductory power electronics courses and related fields for both senior undergraduates and first-year graduate students interested in converter circuits and electronics, control systems, and magnetic and power systems. It will also be an invaluable reference for professionals working in power electronics, power conversion, and analog and digital electronics.

Download or read book Transformers and Inductors for Power Electronics written by W.G. Hurley and published by John Wiley & Sons. This book was released on 2013-04-29 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the fundamentals of electromagnetics, this clear and concise text explains basic and applied principles of transformer and inductor design for power electronic applications. It details both the theory and practice of inductors and transformers employed to filter currents, store electromagnetic energy, provide physical isolation between circuits, and perform stepping up and down of DC and AC voltages. The authors present a broad range of applications from modern power conversion systems. They provide rigorous design guidelines based on a robust methodology for inductor and transformer design. They offer real design examples, informed by proven and working field examples. Key features include: emphasis on high frequency design, including optimisation of the winding layout and treatment of non-sinusoidal waveforms a chapter on planar magnetic with analytical models and descriptions of the processing technologies analysis of the role of variable inductors, and their applications for power factor correction and solar power unique coverage on the measurements of inductance and transformer capacitance, as well as tests for core losses at high frequency worked examples in MATLAB, end-of-chapter problems, and an accompanying website containing solutions, a full set of instructors’ presentations, and copies of all the figures. Covering the basics of the magnetic components of power electronic converters, this book is a comprehensive reference for students and professional engineers dealing with specialised inductor and transformer design. It is especially useful for senior undergraduate and graduate students in electrical engineering and electrical energy systems, and engineers working with power supplies and energy conversion systems who want to update their knowledge on a field that has progressed considerably in recent years.

Download or read book Power Electronics written by Ned Mohan and published by John Wiley & Sons. This book was released on 2003 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: · Electrical Engineering Students · Electrical Engineering Instructors· Power Electronics Engineers Special Features: · Easy to follow step-by-step in depth treatment of all the theory.· Computer simulation chapter describes the role of computer simulations in power electronics. Examples and problems based on Pspice and MATLAB are included.· Introductory chapter offers a review of basic electrical and magnetic circuit concepts.· A new CD-ROM contains the following:· Over 100 of new problems of varying degrees of difficulty for homework assignments and self-learning.· PSpice-based simulation examples, which illustrate basic concepts and help in design of converters.· A newly-developed magnetic component design program that demonstrates design trade-offs.· PowerPoint-based slides, which will improve the learning experience and the ease of using the book About The Book: The text includes cohesive presentation of power electronics fundamentals for applications and design in the power range of 500 kW or less. It describes a variety of practical and emerging power electronic converters made feasible by the new generation of power semiconductor devices. Topics included in this book are an expanded discussion of diode rectifiers and thyristor converters as well as chapters on heat sinks, magnetic components which present a step-by-step design approach and a computer simulation of power electronics which introduces numerical techniques and commonly used simulation packages such as PSpice, MATLAB and EMTP.

Download or read book Power Electronics and Motor Drive Systems written by Stefanos Manias and published by Academic Press. This book was released on 2016-11-08 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics and Motor Drive Systems is designed to aid electrical engineers, researchers, and students to analyze and address common problems in state-of-the-art power electronics technologies. Author Stefanos Manias supplies a detailed discussion of the theory of power electronics circuits and electronic power conversion technology systems, with common problems and methods of analysis to critically evaluate results. These theories are reinforced by simulation examples using well-known and widely available software programs, including SPICE, PSIM, and MATLAB/SIMULINK. Manias expertly analyzes power electronic circuits with basic power semiconductor devices, as well as the new power electronic converters. He also clearly and comprehensively provides an analysis of modulation and output voltage, current control techniques, passive and active filtering, and the characteristics and gating circuits of different power semiconductor switches, such as BJTs, IGBTs, MOSFETs, IGCTs, MCTs and GTOs. Includes step-by-step analysis of power electronic systems Reinforced by simulation examples using SPICE, PSIM, and MATLAB/SIMULINK Provides 110 common problems and solutions in power electronics technologies

Download or read book Dynamics and Control of Switched Electronic Systems written by Francesco Vasca and published by Springer Science & Business Media. This book was released on 2012-03-28 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased efficiency and quality constraints imposed on electrical energy systems have inspired a renewed research interest in the study of formal approaches to the analysis and control of power electronics converters. Switched systems represent a useful framework for modeling these converters and the peculiarities of their operating conditions and control goals justify the specific classification of “switched electronic systems”. Indeed, idealized switched models of power converters introduce problems not commonly encountered when analyzing generic switched models or non-switched electrical networks. In that sense the analysis of switched electronic systems represents a source for new ideas and benchmarks for switched and hybrid systems generally. Dynamics and Control of Switched Electronic Systems draws on the expertise of an international group of expert contributors to give an overview of recent advances in the modeling, simulation and control of switched electronic systems. The reader is provided with a well-organized source of references and a mathematically-based report of the state of the art in analysis and design techniques for switched power converters. Intuitive language, realistic illustrative examples and numerical simulations help the reader to come to grips with the rigorous presentation of many promising directions of research such as: converter topologies and modulation techniques; continuous-time, discrete-time and hybrid models; modern control strategies for power converters; and challenges in numerical simulation. The guidance and information imparted in this text will be appreciated by engineers, and applied mathematicians working on system and circuit theory, control systems development, and electronic and energy conversion systems design.

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2010-07-19 with total page 1189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. Power electronics has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications. * 25% new content* Reorganized and revised into 8 sections comprising 43 chapters* Coverage of numerous applications, including uninterruptable power supplies and automotive electrical systems* New content in power generation and distribution, including solar power, fuel cells, wind turbines, and flexible transmission

Download or read book Power Electronics Basics written by Yuriy Rozanov and published by CRC Press. This book was released on 2015-04-23 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Basics: Operating Principles, Design, Formulas, and Applications provides fundamental knowledge for the analysis and design of modern power electronic devices. This concise and user-friendly resource:Explains the basic concepts and most important terms of power electronicsDescribes the power assemblies, control, and passive compon

Download or read book Power Electronics Design Handbook written by Nihal Kularatna and published by Elsevier. This book was released on 1998-09-09 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Design Handbook covers the basics of power electronics theory and components while emphasizing modern low-power components and applications. Coverage includes power semiconductors, converters, power supplies, batteries, protection systems, and power ICs. One of the unique features of the Power Electronics Design Handbook is the integration of component and system theory with practical applications, particularly energy-saving low-power applications. Many chapters also include a section that looks forward to future developments in that area. References for further information or more in-depth technical reading are also included. Nihal Kularatna is a principal research engineer with the Arthur C. Clarke Foundation in Sri Lanka. He is also the author of Modern Electronic Test and Measuring Instruments, published by the Institute of Electrical Engineers. Emphasizes low- and medium-power components Offers a unique mix of theory and practical application Provides a useful guide to further reading

Download or read book Power Electronics written by Ned Mohan and published by . This book was released on 1994 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Modern Power Electronics written by Andrzej M. Trzynadlowski and published by John Wiley & Sons. This book was released on 2015-11-16 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of the basic principles and methods of electric power conversion and the latest developments in the field This book constitutes a comprehensive overview of the modern power electronics. Various semiconductor power switches are described, complementary components and systems are presented, and power electronic converters that process power for a variety of applications are explained in detail. This third edition updates all chapters, including new concepts in modern power electronics. New to this edition is extended coverage of matrix converters, multilevel inverters, and applications of the Z-source in cascaded power converters. The book is accompanied by a website hosting an instructor’s manual, a PowerPoint presentation, and a set of PSpice files for simulation of a variety of power electronic converters. Introduction to Modern Power Electronics, Third Edition: Discusses power conversion types: ac-to-dc, ac-to-ac, dc-to-dc, and dc-to-ac Reviews advanced control methods used in today’s power electronic converters Includes an extensive body of examples, exercises, computer assignments, and simulations Introduction to Modern Power Electronics, Third Edition is written for undergraduate and graduate engineering students interested in modern power electronics and renewable energy systems. The book can also serve as a reference tool for practicing electrical and industrial engineers.

Download or read book Multiphysics Simulation by Design for Electrical Machines Power Electronics and Drives written by Marius Rosu and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied theory and advanced simulation techniques for electric machines and drives This book combines the knowledge of experts from both academia and the software industry to present theories of multiphysics simulation by design for electrical machines, power electronics, and drives. The comprehensive design approach described within supports new applications required by technologies sustaining high drive efficiency. The highlighted framework considers the electric machine at the heart of the entire electric drive. The book also emphasizes the simulation by design concept—a concept that frames the entire highlighted design methodology, which is described and illustrated by various advanced simulation technologies. Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives begins with the basics of electrical machine design and manufacturing tolerances. It also discusses fundamental aspects of the state of the art design process and includes examples from industrial practice. It explains FEM-based analysis techniques for electrical machine design—providing details on how it can be employed in ANSYS Maxwell software. In addition, the book covers advanced magnetic material modeling capabilities employed in numerical computation; thermal analysis; automated optimization for electric machines; and power electronics and drive systems. This valuable resource: Delivers the multi-physics know-how based on practical electric machine design methodologies Provides an extensive overview of electric machine design optimization and its integration with power electronics and drives Incorporates case studies from industrial practice and research and development projects Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives is an incredibly helpful book for design engineers, application and system engineers, and technical professionals. It will also benefit graduate engineering students with a strong interest in electric machines and drives.

Download or read book Transients of Modern Power Electronics written by Hua Bai and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In high power, high voltage electronics systems, a strategy to manage short timescale energy imbalances is fundamental to the system reliability. Without a theoretical framework, harmful local convergence of energy can affect the dynamic process of transformation, transmission, and storage which create an unreliable system. With an original approach that encourages understanding of both macroscopic and microscopic factors, the authors offer a solution. They demonstrate the essential theory and methodology for the design, modeling and prototyping of modern power electronics converters to create highly effective systems. Current applications such as renewable energy systems and hybrid electric vehicles are discussed in detail by the authors. Key features: offers a logical guide that is widely applicable to power electronics across power supplies, renewable energy systems, and many other areas analyses the short-scale (nano-micro second) transient phenomena and the transient processes in nearly all major timescales, from device switching processes at the nanoscale level, to thermal and mechanical processes at second level explores transient causes and shows how to correct them by changing the control algorithm or peripheral circuit includes two case studies on power electronics in hybrid electric vehicles and renewable energy systems Practitioners in major power electronic companies will benefit from this reference, especially design engineers aiming for optimal system performance. It will also be of value to faculty staff and graduate students specializing in power electronics within academia.

Download or read book Modeling and Control of Power Electronics Converter System for Power Quality Improvements written by Sanjeet Kumar Dwivedi and published by Academic Press. This book was released on 2018-08-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Control of Power Electronics Converter Systems for Power Quality Improvements provides grounded theory for the modeling, analysis and control of different converter topologies that improve the power quality of mains. Intended for researchers and practitioners working in the field, topics include modeling equations and the state of research to improve power quality converters. By presenting control methods for different converter topologies and aspects related to multi-level inverters and specific analysis related to the AC interface of drives, the book helps users by putting a particular emphasis on different control algorithms that enhance knowledge and research work. Present In-depth coverage of modeling and control methods for different converter topology Includes a particular emphasis on different control algorithms to give readers an easier understanding Provides a results and discussion chapter and MATLAB simulation to support worked examples and real-life application scenarios

Download or read book Power Electronic Control in Electrical Systems written by Enrique Acha and published by Newnes. This book was released on 2002-01-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within this book the fundamental concepts associated with the topic of power electronic control are covered alongside the latest equipment and devices, new application areas and associated computer-assisted methods. *A practical guide to the control of reactive power systems *Ideal for postgraduate and professional courses *Covers the latest equipment and computer-aided analysis.

Download or read book Fundamentals of Power Electronics written by Robert W. Erickson and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Power Electronics, Second Edition, is an up-to-date and authoritative text and reference book on power electronics. This new edition retains the original objective and philosophy of focusing on the fundamental principles, models, and technical requirements needed for designing practical power electronic systems while adding a wealth of new material. Improved features of this new edition include: A new chapter on input filters, showing how to design single and multiple section filters; Major revisions of material on averaged switch modeling, low-harmonic rectifiers, and the chapter on AC modeling of the discontinuous conduction mode; New material on soft switching, active-clamp snubbers, zero-voltage transition full-bridge converter, and auxiliary resonant commutated pole. Also, new sections on design of multiple-winding magnetic and resonant inverter design; Additional appendices on Computer Simulation of Converters using averaged switch modeling, and Middlebrook's Extra Element Theorem, including four tutorial examples; and Expanded treatment of current programmed control with complete results for basic converters, and much more. This edition includes many new examples, illustrations, and exercises to guide students and professionals through the intricacies of power electronics design. Fundamentals of Power Electronics, Second Edition, is intended for use in introductory power electronics courses and related fields for both senior undergraduates and first-year graduate students interested in converter circuits and electronics, control systems, and magnetic and power systems. It will also be an invaluable reference for professionals working in power electronics, power conversion, and analogue and digital electronics.