Download or read book Particle Size Enlargement written by C. E. Capes and published by Elsevier. This book was released on 2013-10-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Powder Technology, Volume 1: Particle Size Enlargement is the first of a series which will together form a Handbook of Powder Technology, primarily intended for engineers and scientists working in industry. The scope of the Handbook can be defined as being concerned with that part of chemical engineering which deals with processes involving the handling and treatment of material in solid particulate form. This book deals with methods used to create larger entities from fine particles so that the bulk properties of particulates can be improved. These so-called ""size enlargement"" methods evidently concern a broad spectrum of technical disciplines and industries ranging from the relatively small scale requirements of pharmaceutical manufacturers through the tonnage requirements of the fertilizer and minerals processing industries. A primary objective in preparing this book was to present a generalized account of the many size enlargement techniques scattered throughout these diverse industries, with emphasis on similarities and unifying characteristics whenever possible. The book devotes one chapter to each of the principal methods used to bring particles together into agglomerates: agitation methods— tumbling agglomeration, agitation methods—mixer agglomeration, pressure methods, thermal methods, spray and dispersion methods, and agglomeration from liquids.

Download or read book Powder Technology and Application written by Guo Sheng Gai and published by Trans Tech Publications Ltd. This book was released on 2008-10-30 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from International Forum on Powder Technology & Application, Tsinghua University Beijing, 1-2 April, 2008

Download or read book Particle Breakage written by Agba D. Salman and published by Elsevier. This book was released on 2007-11-01 with total page 1241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle breakage is an important process within a wide range of solids processing industries, including pharmaceuticals, food, agricultural and mining. Breakage of particles can be defined as intentional and unintentional, depending on whether it is desired or not. Through understanding of the science and underlying mechanisms behind this phenomenon, particle breakage can be either minimised or encouraged within an efficient and effective process. Particle Breakage examines particle breakage at three different length scales, ranging from single particle studies through groups of particles and looking at solid processing steps as a whole. This book is the widest ranging book in the field and includes the most up-to-date techniques such as Distinct Element Method (DEM), Monte Carlo simulations and Population Balance Equations (PBE). This handbook provides an overview of the current state-of-the- art and particle breakage. From the small scale of a single particle, to the study of whole processes for breakage; both by experimental study and mathematical modelling.* Covering a wide range of subjects and industrial applications* Allows the reader an understanding of the science behind engineered breakage processes* Giving an unrestrictive and interdisciplinary approach

Download or read book Granulation written by Agba D. Salman and published by Elsevier. This book was released on 2006-11-24 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granulation provides a complete and comprehensive introduction on the state-of-the-art of granulation and how it can be applied both in an academic context and from an industrial perspective. Coupling science and engineering practices it covers differing length scales from the sub-granule level through behaviour through single granules, to bulk granule behaviour and equipment design. With special focus on a wide range of industrially relevant areas from fertilizer production, through to pharmaceuticals. Experimental data is complemented by mathematical modelling in this emerging field, allowing for a greater understanding of the basis of particle products and this important industry sector.Four themes run through the book: 1. The Macro Scale processing for Granulation – including up to date descriptions of the methods used for granulation and how they come about and how to monitor – on-line these changes.2. The Applications of granulation from an industrial perspective, with current descriptive roles and how they are undertaken with relevance to industry, and effective properties.3. Mechanistic descriptions of granulation and the different rate processes occurring within the granulator. This includes methods of modelling the process using Population – Balance Equations, and Multi-level Computational Fluid Dynamics Models.4. The Micro Scale: Granules and Smaller, looking at single granules and there interactions and modelling, while also considering the structure of granules and their constituent liquid bridges.* Covers a wide range of subjects and industrial applications* Provides an understanding of current issues for industrial and academic environments* Allows the reader an understanding of the science behind engineered granulation processes

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. - Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques - Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys - Reviews the manufacture and densification of PM components and explores joining techniques

Download or read book Handbook of Powder Science Technology written by Muhammed Fayed and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of Canada, and Australia have increased teach Handbook of Powder Science and Technology, ing, research, and training activities in areas the field of powder science and technology has related to particle science and technology. gained broader recognition and its various ar In addition, it is worth mentioning the many eas of interest have become more defined and books and monographs that have been pub focused. Research and application activities lished on specific areas of particle, powder, related to particle technology have increased and particle fluid by professional publishers, globally in academia, industry, and research technical societies and university presses. Also, institutions. During the last decade, many to date, there are many career development groups, with various scientific, technical, and courses given by specialists and universities on engineering backgrounds have been founded various facets of powder science and technol to study, apply, and promote interest in areas ogy.

Download or read book Powder Technology Handbook Fourth Edition written by Ko Higashitani and published by CRC Press. This book was released on 2019-10-16 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth Edition of Powder Technology Handbook continues to serve as the comprehensive guide to powder technology and the fundamental engineering processes of particulate technology, while incorporating significant advances in the field in the decade since publication of the previous edition. The handbook offers a well-rounded perspective on powder technologies in gas and liquid phases that extends from particles and powders to powder beds and from basic problems to actual applications. This new edition features fully updated and new chapters written by a team of internationally distinguished contributors. All content has been updated and new sections added on. Powder Technology Handbook provides methodologies of powder and particle handling technology essential to scientific researchers and practical industrial engineers. It contains contemporary and comprehensive information on powder and particle handling technology that is extremely useful not only to newcomers but also to experienced engineers and researchers in the field of powder and particle science and technology.

Download or read book Powder Technology and Application IV written by Shujuan Dai and published by . This book was released on 2012 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now.Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals).The result is a formidable reference source for those in all aspects of the metal powder industry. - Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Expert Russian team of authors, all very experienced - English translation and update of book previously published in Russian

Download or read book Powder Technology written by Alberto Adriano Cavalheiro and published by BoD – Books on Demand. This book was released on 2018-09-26 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Technology comprehends several particulate solid systems, which must be controlled, from the nucleation stages to the final application of derivative materials. Powder characteristics depend on the synthesis method, which can be a simple solid-state reaction followed by attrition milling, mechanosynthesis, or chemical methods, such as the sol-gel method. Powder technology is an important interdisciplinary area, which can provide solutions to several application fields. The book Powder Technology contains several peer-reviewed chapters organized in two sections. Section 1 is focused on metal and composites powders and Section 2 contains chapters on non-metallic powders. I sincerely hope that the contents of this book will help in the dissemination of knowledge to researchers and students working with powder technology.

Download or read book Powder Technology written by Hiroaki Masuda and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing from the third edition of the bestselling Powder Technology Handbook, this book is focused solely on analyzing the fundamental properties and behavior of particles and particle beds. Powder Technology: Fundamentals of Particles, Powder Beds, and Particle Generation concentrates on the most useful analytical methods of observation, measurement, modeling, and prediction. This volume carefully incorporates the progressive work and vision of new authors while retaining the concepts that continue to promote innovative research and applications. The authors highlight.

Download or read book Biomaterials Science Processing Properties and Applications IV written by Susmita Bose and published by John Wiley & Sons. This book was released on 2014-09-15 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This CT Volume contains 11 contributed papers from the following 2013 Materials Science and Technology (MS&T'13) symposia: Next Generation Biomaterials Surface Properties of Biomaterials

Download or read book Cold Spray Technology written by Anatolii Papyrin and published by Elsevier. This book was released on 2006-10-04 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is recognized by world leading scientists and specialists. A wide spectrum of research is being conducted at many research centres and companies in many countries. New approach to spray coatings Results are exceptionally pure coatings Low spray temperature without degradation of powder and substrate materials High productivity, high deposition efficiency High operational safety because of absence of high temperature gas jets, radiation and explosive gases Excellent thermal and electrical conductivity Wide spectrum of applications because of important advantages of the process

Download or read book Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1979 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes subject section, name section, and 1968-1970, technical reports.

Download or read book Powder Technology Handbook written by Hiroaki Masuda and published by CRC Press. This book was released on 2006-01-13 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Powder Technology Handbook, Third Edition provides a comprehensive guide to powder technology while examining the fundamental engineering processes of particulate technology. The book offers a well-rounded perspective on powder technologies that extends from particle to powder and from basic problems to actual applications. Pro

Download or read book Progress in Civil Architectural and Hydraulic Engineering IV written by Yun-Hae Kim and published by CRC Press. This book was released on 2018-11-22 with total page 1447 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Civil, Architectural and Hydraulic Engineering series provides a forum for exchange of ideas and enhancing mutual understanding between scientists, engineers, policymakers and experts in these engineering fields. This book contains peer-reviewed contributions from many experts representing industry and academic es

Download or read book Hydraulic Engineering IV written by Liquan Xie and published by CRC Press. This book was released on 2016-06-22 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic research is developing beyond traditional civil engineering to satisfy increasing demands in natural hazards, structural safety assessment and environmental research. Hydraulic Engineering IV contains 38 technical papers presented at the 4th International Technical Conference on Hydraulic Engineering (CHE 2016, Hong Kong, 16–17 July 2016), including the 5th International Workshop on Environment and Safety Engineering (WESE 2016) and the 2nd International Structural and Civil Engineering Workshop (SCEW 2016). The sections on hydraulic engineering mainly focus on river engineering and sediment transport, flood hazards and innovative control measures, complex flow modelling, dam safety, slope stability, environmental hydraulics and hydrology, while the contributions related to environmental issues focus on environmental prediction and control techniques in environmental geoscience, water pollution and ecosystem degradation, applied meteorology, coastal engineering, safety engineering and environmental pollution control. The sections on structural and civil engineering mainly focus on underground engineering, construction engineering, road and bridge engineering. Hydraulic Engineering IV will of interest to academics and engineering involved in Hydraulic Engineering and Civil Engineering.