Download or read book POWDER HYDROXYAPATITE DISSOLUTION KINETICS AND A STUDY OF EFFECTS OF DODECYLAMINE AND FLUORIDE written by WING-KEE PHILIP CHO and published by . This book was released on 1983 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: wide ranges of partial saturation and calcium/phosphate ratios in the solution.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1983 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1982 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adsorption on and Surface Chemistry of Hydroxyapatite written by Dwarika N. Misra and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydroxyapatite is the structural prototype of the main inorganic constituent of bone and teeth and, together with fluorapatite, is also one of the principal minerals in commercial phosphate ores. The adsorption characteristics and surface chemistry of hydroxyapatite are important in understanding the growth, dissolution and adhesion mechanisms of bone and tooth tissues and in elucidating the factors in mineral beneficiation such as floation and flocculation. This volume essentially documents the proceedings of the symposium on the same topic held at the American Chemical Society Meeting in Kansas City, MO, September 12-17, 1982. It includes a few papers which were not presented at the symposium but does not comprise the entire program. This volume provides, on a limited scale, a multidisciplinary overview of current work in the field of adsorptive behavior and surface chemistry of hydroxyapatite and includes certain review articles. There are two papers each on adsorption, adsorption and its effects on crystal growth or dissolution kinetics, effects of electrochemical parameters on solubility and adsorption, and newer physical methods (exoemission and high-resolution NMR) of examining hydroxyapatite surface. There is one paper each on structure modelling of apatite surface based on octacalcium phosphate interface and on biodegradation of sintered hydroxyapatite.
Download or read book Calcium Phosphates in Biological and Industrial Systems written by Zahid Amjad and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calcium Phosphates in Biological and Industrial Systems provides a comprehensive discussion on calcium phosphates in the diverse areas of their applications. The authors are all respected specialists in their particular fields, possessing wide knowledge and experience and able to analyze recent results and relate them to their respective areas of expertise. New information, as well as a review of current concepts, highlights the individual contributions. Due to the broad scope of the subject covered and the large number of contributions, this book is divided into three parts. Whilst each section contains a basic theme, there is a considerable overlapping of ideas and approaches. This reflects the excitement and interdisciplinary nature of investigations by researchers interested in dissimilar aspects of calcium phosphates. Considering the general interest in calcium phosphates, Calcium Phosphates in Biological and Industrial Systems is directed at an audience of researchers in the fields of biology, chemistry, dentistry, geology, chemical engineering, environmental engineering, and medicine. It will also be useful to technology-focused researchers in industry whose investigations might be related directly or indirectly to calcium phosphates.
Download or read book Natural Microporous Materials in Environmental Technology written by P. Misaelides and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop on the Application of Natural Microporous Materials for Environmental Technology, Smolenice Castle, Slovakia, 26-30 October 1998
Download or read book Water Chemistry written by Murat Eyvaz and published by BoD – Books on Demand. This book was released on 2020-02-05 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water, which plays an important role in every aspect of our daily lives, is the most valuable natural resource we have on this planet. Drinking, bathing, cooking, regeneration, cleaning, production, energy, and many other uses of water originate from some of its versatile, useful, basic, and unique features. The access, purification, and reuse of water on our planet, which is of course not endless and not available for direct use, is directly related to the water chemistry that explores its inimitable properties. This book includes research on water chemistry-related applications in environmental management and sustainable environmental issues such as water and wastewater treatment, water quality management, and other similar topics. The book consists of three sections, namely, water treatment, wastewater treatment, and water splitting, respectively, and includes 11 chapters. In these chapters, water-wastewater remediation methods, nanomaterials in water treatment, and water splitting processes are comprehensively reviewed in terms of water chemistry.The editors would like to record their sincere thanks to the authors for their contributions.
Download or read book Mineral Processing and the Environment written by G.P. Gallios and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral processing technologies have been used for decades to protect the environment and many examples of such applications are given here. The book covers four major subject areas: fundamentals; environmental pollution and its prevention; separation processes; and innovative techniques. Audience: Scientists, engineers and technologists conducting both applied and basic research into the different environmental aspects of mineral processing.
Download or read book Advanced Functional Materials from Nanopolysaccharides written by Ning Lin and published by Springer Nature. This book was released on 2019-11-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research on nanopolysaccharides in the development of functional materials, from their preparation, properties and functional modifications to the architecture of diverse functional materials. Polysaccharide-based nanoparticles, including nanocellulose, nanochitin, and nanostarch have attracted interest in the field of nanoscience, nanotechnology, and materials science that encompasses various industrial sectors, such as biomedicine, catalyst, coating, energy, optical materials, environmental materials, construction materials, and antibacterial materials. This book establishes a fundamental framework, highlighting the architecture strategies of typical functional systems based on nanopolysaccharides and integrated analysis of their significant influence and properties to various functional behaviors of materials, to help readers to fully understand the fundamental features of nanopolysaccharides and functional materials. Addressing the potential for practical applications, the book also covers the related industrial interests and reports on highly valued products from nanopolysaccharides, providing ideas for future studies in the area. Intended both for academics and professionals who are interested in nanopolysaccharides, it is also a valuable resource for postgraduate students, researchers, and engineers involved in R&D of natural polymers, nanotechnology, and functional materials.
Download or read book Nanoclay Reinforced Polymer Composites written by Mohammad Jawaid and published by Springer. This book was released on 2016-08-12 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume book series that exhaustively reviews the key recent research into nanoclay reinforced polymer composites. This second volume focuses on nanoclay based nanocomposites and bionanocomposites fabrication, characterization and applications. This includes classification of nanoclay, chemical modification and processing techniques of nanocomposites. The book also provides comprehensive information about nanoclay modification and functionalization; modification of nanoclay systems, geological and mineralogical research on clays suitability; bio-nanocomposites based on nanoclays; modelling of mechanical behaviour of halloysite based composites; mechanical and thermal properties of halloysite nanocomposites; the effect of Nanoclays on gas barrier properties of polymers and modified nanocomposites. This book is a valuable reference guide for academics and industrial practitioners alike.
Download or read book Advances in Ceramics written by Costas Sikalidis and published by BoD – Books on Demand. This book was released on 2011-08-09 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book contains twenty-two chapters and is divided into three sections. Section I consists of nine chapters which discuss synthesis through innovative as well as modified conventional techniques of certain advanced ceramics (e.g. target materials, high strength porous ceramics, optical and thermo-luminescent ceramics, ceramic powders and fibers) and their characterization using a combination of well known and advanced techniques. Section II is also composed of nine chapters, which are dealing with the aqueous processing of nitride ceramics, the shape and size optimization of ceramic components through design methodologies and manufacturing technologies, the sinterability and properties of ZnNb oxide ceramics, the grinding optimization, the redox behaviour of ceria based and related materials, the alloy reinforcement by ceramic particles addition, the sintering study through dihedral surface angle using AFM and the surface modification and properties induced by a laser beam in pressings of ceramic powders. Section III includes four chapters which are dealing with the deposition of ceramic powders for oxide fuel cells preparation, the perovskite type ceramics for solid fuel cells, the ceramics for laser applications and fabrication and the characterization and modeling of protonic ceramics.
Download or read book Handbook of Microalgae Based Processes and Products written by Eduardo Jacob-Lopes and published by Academic Press. This book was released on 2020-07-23 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Microalgae-based Processes and Products provides a complete overview of all aspects involved in the production and utilization of microalgae resources at commercial scale. Divided into four parts (fundamentals, microalgae-based processes, microalgae-based products, and engineering approaches applied to microalgal processes and products), the book explores the microbiology and metabolic aspects of microalgae, microalgal production systems, wastewater treatment based in microalgae, CO2 capture using microalgae, microalgae harvesting techniques, and extraction and purification of biomolecules from microalgae. It covers the largest number of microalgal products of commercial relevance, including biogas, biodiesel, bioethanol, biohydrogen, single-cell protein, single-cell oil, biofertilizers, pigments, polyunsaturated fatty acids, bioactive proteins, peptides and amino acids, bioactive polysaccharides, sterols, bioplastics, UV-screening compounds, and volatile organic compounds. Moreover, it presents and discusses the available engineering tools applied to microalgae biotechnology, such as process integration, process intensification, and techno-economic analysis applied to microalgal processes and products, microalgal biorefineries, life cycle assessment, and exergy analysis of microalgae-based processes and products. The coverage of a broad range of potential microalgae processes and products in a single volume makes this handbook an indispensable reference for engineering researchers in academia and industry in the fields of bioenergy, sustainable development, and high-value compounds from biomass, as well as graduate students exploring those areas. Engineering professionals in bio-based industries will also find valuable information here when planning or implementing the use of microalgal technologies. Covers theoretical background information and results of recent research. Discusses all commercially relevant microalgae-based processes and products. Explores the main emerging engineering tools applied to microalgae processes, including techno-economic analysis, process integration, process intensification, life cycle assessment, and exergy analyses.
Download or read book Environmental Remediation Through Carbon Based Nano Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2020-09-25 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines carbon-based nanocomposite materials and their application in various environmental fields, such as wastewater treatment, and air and soil remediation. Featuring illustrations, and tables summarizing the latest research, it gathers up-to-date information on the application of carbon nanocomposites in the removal of environmental pollutants from different sources. Given its scope, the book is a valuable textbook for research students, and a useful handbook and reference resource for researchers, academics and industrial scientists working in the field of environmental pollutants and their safe removal.
Download or read book Chemistry of Phytopotentials Health Energy and Environmental Perspectives written by LD Khemani and published by Springer Science & Business Media. This book was released on 2011-12-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of human civilization, plants have been our true companions. Plants contribute not only to our existence but also serve us through discovery, design and the treatment of various diseases where there is no satisfactory cure in modern medicine. This has focused Natural Product Chemists to unravel plants therapeutic potential in the light of modern analytical and pharmacological understandings. Presence of multiple active phytochemicals in medicinal plants offers exciting opportunity for the development of novel therapeutics, providing scientific justification for their use in traditional medicines. Non-food plants have been recognized as biofactories for the production of eco-friendly value added materials including agricultural, food products, enzymes, nutraceuticals etc. They have also been widely explored for personal care, industrial products and sources of energy generation. The proven efficacy of botanicals has been appreciated by the scientific community and strengthened plant-human relationship. The synergism in the Phytoproducts, the result of the interaction of two or more moieties, is not simply additive but multiplicative. Recent acceptance of the Food and Drug Administration (US) for herbal-medicine based preparation has renewed interest in Natural Product Research. The year 2011 is declared as the International Year of Chemistry (IYC 2011) by the United Nations Assembly. On this occasion, the present conference CPHEE 2011 aims to offer chemists from diverse areas to come to a common platform to share the knowledge and unveil the chemistry and magic potentials of phytoproducts for the mankind.
Download or read book Phoscorites and Carbonatites from Mantle to Mine the Key Example of the Kola Alkaline Province written by F. Wall and published by The Mineralogical Society of Great Britain and Ireland. This book was released on 2004-07-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phoscorites are dark, often very handsome, sometimes economically valuable, magnetite-apatite-silicate rocks, almost always associated with carbonatite. They are key to understanding the longstanding question of how carbonate and carbonate-bearing magmas rise to the crust and the Earths surface. Despite this, they have been given little attention; a search on geological literature databases will produce thousands of references to carbonatite (up to 4125 on Georef) but not more than thirty references to phoscorite. This book goes some way to redress this balance. Over recent years many European and North American scientists have studied Kola rocks in collaboration with Russian colleagues. The idea for this book came from one such project funded by the European organisation, INTAS (Grant No 97-0722). The Kola Peninsula is one of the outstanding areas in the World for the concentration and economic importance of alkaline rocks. However, Russian work on the Kola complexes is still relatively unknown and a particular aim of this book, as well as presenting current research, is to make this knowledge accessible to English language readers. A large exploration programme on Kola alkaline rocks was active from 1950 to 1990 and involved teams of geologists who studied many kilometres of drill core and carried out detailed mineralogical and petrological studies.
Download or read book Seaweed Polysaccharides written by Jayachandran Venkatesan and published by Elsevier. This book was released on 2017-05-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seaweed Polysaccharides: Isolation, Biological, and Biomedical Applications examines the isolation and characterization of algal biopolymers, including a range of new biological and biomedical applications. In recent years, significant developments have been made in algae-based polymers (commonly called polysaccharides), and in biomedical applications such as drug delivery, wound dressings, and tissue engineering. Demand for algae-based polymers is increasing and represent a potential—very inexpensive—resource for these applications. The structure and chemical modification of algal polymers are covered, as well as the biological properties of these materials – including antithrombic, anti-inflammatory, anticoagulant, and antiviral aspects. Toxicity of algal biopolymers is also covered. Finally, the book introduces and explains real world applications of algal-based biopolymers in biomedical applications, including tissue engineering, drug delivery, and biosensors. This is the first book to cover the extraction techniques, biomedical applications, and the economic perspective of seaweed polysaccharides. It is an essential text for researchers and industry professionals looking to work with this renewable resource. Provides comprehensive coverage of the research currently taking place in biomedical applications of algae biopolymers Includes practical guidance on the isolation, extraction, and characterization of polysaccharides from sustainable marine sources Covers the extraction techniques, biomedical applications, and economic outlook of seaweed polysaccharides
Download or read book Properties and Applications of Polymer Nanocomposites written by Deba Kumar Tripathy and published by Springer. This book was released on 2017-05-07 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the present edited book is to furnish scientific information about manufacturing, properties, and application of clay and carbon based polymer nanocomposites. It can be used as handbook for undergraduate and post graduate courses (for example material science and engineering, polymer science and engineering, rubber technology, manufacturing engineering, etc.) as well as as reference book for research fellows and professionals. Polymer nanocomposites have received outstanding importance in the present decade because of their broad range of high-performance applications in various areas of engineering and technology due to their special material properties. A great interest is dedicated to nanofiller based polymeric materials, which exhibit excellent enhancement in macroscopic material properties (mechanical, thermal, dynamic mechanical, electrical and many more) at very low filler contents and can therefore be used for the development of next-generation composite materials.
