EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Post irradiation Deformation Characteristics of Heavy ion Irradiated 304L SS

Download or read book Post irradiation Deformation Characteristics of Heavy ion Irradiated 304L SS written by and published by . This book was released on 1994 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Post-irradiation deformation behavior in Ni-ion-irradiated 304L stainless steel (SS) is examined as a function of radiation dose and deformation temperature. For similar strain levels, specimens exhibit a transition from dislocation slip to deformation-induced twinning at 25C with increasing radiation dose. At 288C twinning is no longer observed and highly localized slip occurs by the formation of narrow ''channels'' containing a reduced defect density. The observations are discussed in terms of radiation-induced defect character and expected deformation mechanisms.

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Metals Abstracts

Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Effects of Radiation on Materials

Download or read book Effects of Radiation on Materials written by Todd R. Allen and published by ASTM International. This book was released on 2006 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Effects of Radiation on Materials

Download or read book Effects of Radiation on Materials written by D. S. Gelles and published by ASTM International. This book was released on 1996 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Radiation Hardening Effects on Localized Deformation and Stress Corrosion Cracking of Stainless Steels

Download or read book Radiation Hardening Effects on Localized Deformation and Stress Corrosion Cracking of Stainless Steels written by and published by . This book was released on 1993 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation hardening in austenitic stainless steels modifies deformation characteristics and correlate well with increased susceptibility to intergranular stress corrosion cracking (IGSCC). Available data on neutron-irradiated materials have been analyzed and correlations developed between fluence, yield strength, and cracking susceptibility in high-temperature water environments. Large heat-to-heat differences in critical fluence (0.2 to 2.5 x 1021 n/cm2) for IGSCC are documented. In many cases, this variability is consistent with yield strength differences among irradiated materials. IGSCC correlates better to yield strength than to fluence for most heats suggesting a possible role of radiation-induced hardening (and microstructure) on cracking. Microstructural evolution during proton and heavy-ion irradiation has been characterized in low-carbon 302SSs. Hardening results from dislocation loops. SEM and TEM are used to examine dose, strain, and temperature effects on deformation. This hardened microstructure produces inhomogeneous planar deformation within the matrix. Regularly spaced steps are created at the surface during deformation which increase in number with increasing macroscopic strain. Twinning is the dominant deformation mechanism at low temperature, while dislocation channeling is observed at 288C. Deformation characteristics are discussed in terms of potential impact on IGSCC.

Book Effects of Radiation on Materials

Download or read book Effects of Radiation on Materials written by and published by . This book was released on 1996 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Nuclear Science Abstracts

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-05 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Government Reports Announcements   Index

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Metals Abstracts Index

Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1634 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book INIS Atomindex

Download or read book INIS Atomindex written by and published by . This book was released on 1988 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Effects of Temperature and Strain Rate on the Low Cycle Fatigue Properties of Neutron Irradiated Stainless Steel DIN 1 4948

Download or read book Effects of Temperature and Strain Rate on the Low Cycle Fatigue Properties of Neutron Irradiated Stainless Steel DIN 1 4948 written by MI. de Vries and published by . This book was released on 1982 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low cycle fatigue (1cf) specimens of stainless steel DIN 1.4948, which is similar to AISI Type 304, have been irradiated to a relatively low fluence level of maximally 5.1024 n.m-2 (E > 0.1 MeV) at temperatures ranging from 330 to 923 K. Post-irradiation fatigue tests at the conventional strain rate (??) of 3.10-3s-1, were performed at temperatures ranging from 298 to 1023 K. Tests at low strain rates, ranging from 1.10-6 to 1.10-3 s-1, were performed at 823 and 923 K. Irradiation hardening after the low temperature irradiations (623 K and below) caused no effect on the fatigue life. After irradiation at the higher temperatures the fatigue life was significantly reduced due to enhanced intergranular crack formation. This effect increased with increasing temperature and decreasing strain rate. The fatigue life reduction factor (Nfunirr./Nfirr.) increased from a value of one at 723 K to three at 1023 K for tests with the conventional strain rate. The strain rate effect was strongest at 823 K. The post-irradiation fatigue life decreased from 2000 cycles at ?? of 3.10-3s-1 to 90 cycles at the low strain rate of 2.10-6s-1 for tests with 1.0 precent strain range at 823 K.

Book Physics Briefs

Download or read book Physics Briefs written by and published by . This book was released on 1991 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Fundamentals of Radiation Materials Science

Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.

Book Government Reports Annual Index

Download or read book Government Reports Annual Index written by and published by . This book was released on 1994 with total page 1442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.