Download or read book Properties of Polymers written by D.W. van Krevelen and published by Elsevier. This book was released on 2012-12-02 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions summarizes the latest developments regarding polymers, their properties in relation to chemical structure, and methods for estimating and predicting numerical properties from chemical structure. In particular, it examines polymer electrical properties, magnetic properties, and mechanical properties, as well as their crystallization and environmental behavior and failure. The rheological properties of polymer melts and polymer solutions are also considered. Organized into seven parts encompassing 27 chapters, this book begins with an overview of polymer science and engineering, including the typology of polymers and their properties. It then turns to a discussion of thermophysical properties, from transition temperatures to volumetric and calorimetric properties, along with the cohesive aspects and conformation statistics. It also introduces the reader to the behavior of polymers in electromagnetic and mechanical fields of force. The book covers the quantities that influence the transport of heat, momentum, and matter, particularly heat conductivity, viscosity, and diffusivity; properties that control the chemical stability and breakdown of polymers; and polymer properties as an integral concept, with emphasis on processing and product properties. Readers will find tables that give valuable (numerical) data on polymers and include a survey of the group contributions (increments) of almost every additive function considered. This book is a valuable resource for anyone working on practical problems in the field of polymers, including organic chemists, chemical engineers, polymer processers, polymer technologists, and both graduate and PhD students.

Download or read book Physical Properties of Polymers written by James E. Mark and published by . This book was released on 1993 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents have been divided into sections on physical states of polymers and characterization techniques. Chapters on physical states include discussions of the rubber elastic state, the glassy state, melts and concentrated solutions, the crystalline state, and the mesomorphic state. Characterization techniques described are molecular spectroscopy and scattering techniques.

Download or read book Polymer Engineering Science and Viscoelasticity written by Hal F. Brinson and published by Springer. This book was released on 2015-01-24 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified mechanics and materials perspective on polymers: both the mathematics of viscoelasticity theory as well as the physical mechanisms behind polymer deformation processes. Introductory material on fundamental mechanics is included to provide a continuous baseline for readers from all disciplines. Introductory material on the chemical and molecular basis of polymers is also included, which is essential to the understanding of the thermomechanical response. This self-contained text covers the viscoelastic characterization of polymers including constitutive modeling, experimental methods, thermal response, and stress and failure analysis. Example problems are provided within the text as well as at the end of each chapter. New to this edition: · One new chapter on the use of nano-material inclusions for structural polymer applications and applications such as fiber-reinforced polymers and adhesively bonded structures · Brings up-to-date polymer production and sales data and equipment and procedures for evaluating polymer characterization and classification · The work serves as a comprehensive reference for advanced seniors seeking graduate level courses, first and second year graduate students, and practicing engineers

Download or read book Smart Polymers and their Applications written by Maria Rosa Aguilar and published by Elsevier. This book was released on 2014-02-19 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart polymers are polymers that respond to different stimuli or changes in the environment. Smart Polymers and their Applications reviews the types, synthesis, properties, and applications of smart polymers. Chapters in part one focus on types of polymers, including temperature-, pH-, photo-, and enzyme-responsive polymers. Shape memory polymers, smart polymer hydrogels, and self-healing polymer systems are also explored. Part two highlights applications of smart polymers, including smart instructive polymer substrates for tissue engineering; smart polymer nanocarriers for drug delivery; the use of smart polymers in medical devices for minimally invasive surgery, diagnosis, and other applications; and smart polymers for bioseparation and other biotechnology applications. Further chapters discuss the use of smart polymers for textile and packaging applications, and for optical data storage. Smart Polymers and their Applications is a technical resource for chemists, chemical engineers, mechanical engineers, and other professionals in the polymer industry; manufacturers in such sectors as medical, automotive, and aerospace engineering; and academic researchers in polymer science. Reviews the different types of smart polymer, discussing their properties, structure, design, and characterization Reviews applications of smart polymers in such areas as biomedical engineering, textiles, and food packaging

Download or read book Modification of Polymer Properties written by Carlos Federico Jasso-Gastinel and published by William Andrew. This book was released on 2016-09-14 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of Polymer Properties provides, for the first time, in one title, the latest information on gradient IPNs and gradient copolymers. The book covers the broad range of polymer modification routes in a fresh, current view representing a timely addition to the technical literature of this important area. Historically, blends, copolymers, or filled polymers have been developed to meet specific properties, or to optimize the cost/properties relationship. Using the gradient structure approach with conventional radical polymerization, it has been shown that it is possible to optimize properties if appropriate gradients in the composition of copolymer chains are obtained. An overview of the gradient structure approach for designing polymers has not appeared in the recent literature and this title covers the different methods used to modify properties, offering the whole range of ways to modify polymers in just one volume and making this an attractive option for a wide audience of practitioners. The approach for each chapter is to explain the fundamental principles of preparation, cover properties modification, describe future research and applications as examples of materials that may be prepared for specific applications, or that are already in use, in present day applications. The book is for readers that have a basic background in polymer science, as well as those interested in the different ways to combine or modify polymer properties. Provides an integrated view on how to modify polymer properties Presents the entire panorama of polymer properties modification in one reference, covering the essential information in each topic Includes the optimization of properties using gradients in polymers composition or structure

Download or read book Structure Property Relationships in Polymers written by Charles E. Carraher Jr. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first concern of scientists who are interested in synthetic polymers has always been, and still is: How are they synthesized? But right after this comes the question: What have I made, and for what is it good? This leads to the important topic of the structure-property relations to which this book is devoted. Polymers are very large and very complicated systems; their character ization has to begin with the chemical composition, configuration, and con formation of the individual molecule. The first chapter is devoted to this broad objective. The immediate physical consequences, discussed in the second chapter, form the basis for the physical nature of polymers: the supermolecular interactions and arrangements of the individual macromolecules. The third chapter deals with the important question: How are these chemical and physical structures experimentally determined? The existing methods for polymer characterization are enumerated and discussed in this chapter. The following chapters go into more detail. For most applications-textiles, films, molded or extruded objects of all kinds-the mechanical and the thermal behaviors of polymers are of pre ponderant importance, followed by optical and electric properties. Chapters 4 through 9 describe how such properties are rooted in and dependent on the chemical structure. More-detailed considerations are given to certain particularly important and critical properties such as the solubility and permeability of polymeric systems. Macromolecules are not always the final goal of the chemist-they may act as intermediates, reactants, or catalysts. This topic is presented in Chapters 10 and 11.

Download or read book Polymers and Their Properties Fundamentals of structure and mechanics written by J. W. S. Hearle and published by Ellis Horwood. This book was released on 1982 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grady, a transgendered high school student, yearns for acceptance by his classmates and family as he struggles to adjust to his new identity as a male.

Download or read book Mechanical Properties of Solid Polymers written by Ian M. Ward and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an updated and comprehensive account of the properties of solid polymers, the book covers all aspects of mechanical behaviour. This includes finite elastic behavior, linear viscoelasticity and mechanical relaxations, mechanical anisotropy, non-linear viscoelasicity, yield behavior and fracture. New to this edition is coverage of polymer nanocomposites, and molecular interpretations of yield, e.g. Bowden, Young, and Argon. The book begins by focusing on the structure of polymers, including their chemical composition and physical structure. It goes on to discuss the mechanical properties and behaviour of polymers, the statistical molecular theories of the rubber-like state and describes aspects of linear viscoelastic behaviour, its measurement, and experimental studies. Later chapters cover composites and experimental behaviour, relaxation transitions, stress and yielding. The book concludes with a discussion of breaking phenomena.

Download or read book Polymer Properties at Room and Cryogenic Temperatures written by Gunther Hartwig and published by Springer Science & Business Media. This book was released on 1995-01-31 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most descriptions of polymers start at room temperature and end at the melting point. This textbook starts at very low temperatures and ends at room temperature. At low temperatures, may processes and relaxations are frozen which allows singular processes or separate relaxations to be studied. At room temperatures, or at the main glass transitions, many processes overlap and the properties are determined by relaxations. At low temperatures, there are temperature ranges with negligible influences by glass transitions. They can be used for investigating so-called basic properties which arise from principles of solid state physics. The chain structure of polymers, however, requires stringent modifications for establishing solid state physics of polymers. Several processes which are specific of polymers, occur only at low temperatures. There are also technological aspects for considering polymers at low temperatures. More and more applications of polymeric materials in low temperature technology appear. Some examples are thermal and electrical insulations, support elements for cryogenic devices, low-loss materials for high frequency equipments. It is hoped that, in addition to the scientific part, a data collection in the appendix may help to apply polymers more intensively in low temperature technology. The author greatly appreciates the contributions by his coworkers of the Kernforschungszentrum Karlsruhe in measurement and discussion of many data presented in the textbook and its appendix. Fruitful disccussions with the colleagues Prof. H. Baur, Prof. S. Hunklinger, Prof. D. Munz and Prof. R.

Download or read book An Introduction to the Mechanical Properties of Solid Polymers written by I. M. Ward and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the mechanical behaviour of solid polymers. Extensively revised and updated throughout, the second edition now includes new material on mechanical relaxations and anisotropy, composites modelling, non-linear viscoelasticity, yield behaviour and fracture of tough polymers. The accessible approach of the book has been retained with each chapter designed to be self contained and the theory and applications of the subject carefully introduced where appropriate. The latest developments in the field are included alongside worked examples, mathematical appendices and an extensive reference. Fully revised and updated throughout to include all the latest developments in the field Worked examples at the end of the chapter An invaluable resource for students of materials science, chemistry, physics or engineering studying polymer science

Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.

Download or read book Organic and Physical Chemistry of Polymers written by Yves Gnanou and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic and Physical Chemistry of Polymers provides a thorough introduction to the fundamentals of polymers, including their structure and synthesis as well as their chemical and physical properties. This accessible guide illuminates the increasingly important role of polymers in modern chemistry, beginning with the essentials, then covering thermodynamics, conformation, morphology, and measurements of molar masses; polymerization mechanisms, reaction of polymers, synthesis of block and graft polymers, and complex topologies; and the mechanical properties, rheology, polymer processing, and fabrication of fibers and films.

Download or read book Chemistry and Properties of Crosslinked Polymers written by Labana and published by Elsevier. This book was released on 2012-12-02 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and Properties of Crosslinked Polymers provides a description of the structure property relationship, chemistry, and methods of characterization of crosslinked polymers. The book presents papers that discuss experimental techniques to study polymer network structure; deduction of information on network structure from theoretical considerations; interpenetrating polymer networks; crosslinked polymers for high temperature applications; a novel class of polyurethanes; crosslinking agents; and the influence of crosslinking agents on thermal and mechanical properties. The text will be of value to materials scientists and engineers, chemists, and researchers in the field of polymer science.

Download or read book Electrical Properties of Polymers written by A. R. Blythe and published by Cambridge University Press. This book was released on 2005-06-10 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive update on the fundamentals and recent advancements of electrical properties of polymers.

Download or read book Physical Properties of Polymers written by Frederick Bueche and published by Krieger Publishing Company. This book was released on 1979 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics of Polymers written by George Youssef and published by Elsevier. This book was released on 2021-12-02 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Mechanics of Polymers: Properties, Processing, and Behavior provides readers with an overview of the properties, mechanical behaviors and modeling techniques for accurately predicting the behaviors of polymeric materials. The book starts with an introduction to polymers, covering their history, chemistry, physics, and various types and applications. In addition, it covers the general properties of polymers and the common processing and manufacturing processes involved with them. Subsequent chapters delve into specific mechanical behaviors of polymers such as linear elasticity, hyperelasticity, creep, viscoelasticity, failure, and fracture. The book concludes with chapters discussing electroactive polymers, hydrogels, and the mechanical characterization of polymers. This is a useful reference text that will benefit graduate students, postdocs, researchers, and engineers in the mechanics of materials, polymer science, mechanical engineering and material science. Additional resources related to the book can be found at polymersmechanics.com. Provides examples of real-world applications that demonstrate the use of models in designing polymer-based components Includes access to a companion site from where readers can download FEA and MATLAB code, FEA simulation files, videos and other supplemental material Features end-of-chapter summaries with design and analysis guidelines, practice problem sets based on real-life situations, and both analytical and computational examples to bridge academic and industrial applications

Download or read book Mechanical Properties of Polymers and Composites Second Edition written by Robert F. Landel and published by CRC Press. This book was released on 1993-12-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, now in its second edition, offers an up-to-date, expanded treatment of the behaviour of polymers with regard to material variables and test and use conditions. It highlights general principles, useful empirical rules and practical equations.;Detailing the specific behaviour of many common polymers, the text: places emphasis on time and frequency dependence over temperature dependence; uses contemporary molecular mechanisms to explain creep, stress relaxation, constant strain rate responses and crazing; provides explicit equations to predict responses; supplies a discussion of large deformation multiaxial responses; compares statistical and continuum theories on the same data set; and updates stress-strain behaviour and particulate filled systems.