Download or read book Polymer Waste Management written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2018-08-28 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is literally awash with plastics and this book practically provides a broad overview of plastic recycling procedures and waste management. With the huge amount of plastics floating in the oceans, fish and other sea creatures are directly suffering the consequences. On land, city leaders and planners are banning one-use plastics as well as plastic bags from grocery stores in an effort to stem the use. Many countries have made official announcements and warnings concerning the pollution caused from plastic wastes. These urgent developments have stimulated the author to study the problem and write Polymer Waste Management. Plastic recycling refers to a method that retrieves the original plastic material. However, there are many sophisticated methods available for the treatment and management of waste plastics such as basic primary recycling, where the materials are sorted and collected individually. In chemical recycling, the monomers and related compounds are processed by special chemical treatments. Other methods, such as pyrolysis, can produce fuels from waste plastics. These methods and others are treated comprehensively in the book. This groundbreaking book also discusses: General aspects, such as amount of plastics production, types of waste plastics, analysis procedures for identification of waste plastic types, standards for waste treatment, contaminants in recycled plastics. Environmental aspects, such as pollution in the marine environment and landfills. The advantages of the use of bio-based plastics. Recycling methods for individual plastic types and special catalysts.

Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Degradable Polymers Recycling and Plastics Waste Management written by Albertsson and published by CRC Press. This book was released on 1995-07-07 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the International Workshop on Controlled Life-Cycle of Polymeric Materials held in Stockholm, this work examines degradable polymers and the recycling of plastic materials. It highlights recent results on recycling and waste management, including topics such as renewable resources, degradation, processing and products, and environmental is

Download or read book Plastics Waste Management written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2019-09-02 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides clear explanations for newcomers to the subject as well as contemporary details and theory for the experienced user in plastics waste management. It is seldom that a day goes by without another story or photo regarding the problem of plastics waste in the oceans or landfills. While important efforts are being made to clear up the waste, this book looks at the underlying causes and focuses on plastics waste management. Plastics manufacturers have been slow to recognize their environmental impact compared with more directly polluting industries. However, the environmental pressures concerning plastics have forced the industry to examine their own recycling operations and implement plastics waste management. Plastics Waste Management realizes two ideals: That all plastics should be able to persist for as long as plastics are required, and that all plastics are recycled in a uniform manner regardless of the length of time for which it persists. The book examines plastics waste management and systems for the environment, as well the management approaches and techniques which are appropriate for managing the environment. It serves as an excellent and thoughtful plastics waste management handbook. This groundbreaking book: Identifies deficiencies in plastics waste management Extrapolates from experiences to draw some conclusions about plastics waste for persistence Describes methods how the waste related processing techniques should be used in recycling Shows how the consumer and industry can assess the performance of plastics waste management Explains waste utilization by recycling techniques as well as waste reduction Life cycle assessment as an important technique for recycling of persistent plastics waste.

Download or read book Polymer Products and Waste Management written by Martijntje Smits and published by . This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyzing the future strategies for polymer waste management, this volume addresses the chemical/technical problems as well as the societal aspects of this area.

Download or read book Plastic Waste Management written by Kalim Deshmukh and published by John Wiley & Sons. This book was released on 2024-03-15 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste Management Comprehensive resource on innovative and breakthrough developments in plastic waste management, covering a wide range of processing techniques and applications Plastic Waste Management offers a complete guide to the best plastic waste management practices through recycling, incineration, landfill, and other processes, discusses applications of plastic waste management including energy generation, biochemical production, construction, and food packaging, covering current challenges relating to plastic waste, explaining the sources of waste and their routes into the environment, and providing systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstock, gasification, and thermal recycling. The book also discusses different biodegradation mechanisms of plastic wastes and ecotoxicity and ecological Implications of marine plastic debris. From a cultural perspective, the book provides information regarding environmental and health implications, societal issues, and current challenges associated with plastic waste management. Written by leading experts in the field and edited by two highly qualified academics, Plastic Waste Management covers specific sample topics such as: A a roadmap towards a circular economy and environmental sustainability via effective management strategies for plastic wastes Implementation of an analytical hierarchy process for developing better waste collection systems, and chemical recycling of plastic waste for sustainable development Mechanisms, perspectives, and challenges for natural biodegradation of plastic wastes, and conversion of plastic wastes into value added materials Plastic wastes management and disposal in developing countries, and challenges and strategies for plastic waste management during and post COVID-19 pandemic Plastic Waste Management is a highly valuable resource for scientists and researchers working in the fields of environmental science, environmental engineering, and plastic engineering towards the goal of developing sustainable materials, along with graduate and postgraduate students in related programs of study, and professionals and engineers in related industries.

Download or read book Polymer Waste Management written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2018-08-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is literally awash with plastics and this book practically provides a broad overview of plastic recycling procedures and waste management. With the huge amount of plastics floating in the oceans, fish and other sea creatures are directly suffering the consequences. On land, city leaders and planners are banning one-use plastics as well as plastic bags from grocery stores in an effort to stem the use. Many countries have made official announcements and warnings concerning the pollution caused from plastic wastes. These urgent developments have stimulated the author to study the problem and write Polymer Waste Management. Plastic recycling refers to a method that retrieves the original plastic material. However, there are many sophisticated methods available for the treatment and management of waste plastics such as basic primary recycling, where the materials are sorted and collected individually. In chemical recycling, the monomers and related compounds are processed by special chemical treatments. Other methods, such as pyrolysis, can produce fuels from waste plastics. These methods and others are treated comprehensively in the book. This groundbreaking book also discusses: General aspects, such as amount of plastics production, types of waste plastics, analysis procedures for identification of waste plastic types, standards for waste treatment, contaminants in recycled plastics. Environmental aspects, such as pollution in the marine environment and landfills. The advantages of the use of bio-based plastics. Recycling methods for individual plastic types and special catalysts.

Download or read book Plastics Waste Management written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2019-09-02 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides clear explanations for newcomers to the subject as well as contemporary details and theory for the experienced user in plastics waste management. It is seldom that a day goes by without another story or photo regarding the problem of plastics waste in the oceans or landfills. While important efforts are being made to clear up the waste, this book looks at the underlying causes and focuses on plastics waste management. Plastics manufacturers have been slow to recognize their environmental impact compared with more directly polluting industries. However, the environmental pressures concerning plastics have forced the industry to examine their own recycling operations and implement plastics waste management. Plastics Waste Management realizes two ideals: That all plastics should be able to persist for as long as plastics are required, and that all plastics are recycled in a uniform manner regardless of the length of time for which it persists. The book examines plastics waste management and systems for the environment, as well the management approaches and techniques which are appropriate for managing the environment. It serves as an excellent and thoughtful plastics waste management handbook. This groundbreaking book: Identifies deficiencies in plastics waste management Extrapolates from experiences to draw some conclusions about plastics waste for persistence Describes methods how the waste related processing techniques should be used in recycling Shows how the consumer and industry can assess the performance of plastics waste management Explains waste utilization by recycling techniques as well as waste reduction Life cycle assessment as an important technique for recycling of persistent plastics waste.

Download or read book Plastics and the Environment written by Anthony L. Andrady and published by John Wiley & Sons. This book was released on 2003-02-20 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics offer a variety of environmental benefits. However, their production, applications, and disposal present many environmental concerns. Plastics and the Environment provides state-of-the-art technical and research information on the complex relationship between the plastic and polymer industry and the environment, focusing on the sustainability, environmental impact, and cost—benefit tradeoffs associated with different technologies. Bringing together the field’s leading researchers, Anthony Andrady’s innovative collection not only covers how plastics affect the environment, but also how environmental factors affect plastics. The relative benefits of recycling, resource recovery, and energy recovery are also discussed in detail. The first of the book’s four sections represents a basic introduction to the key subject matter of plastics and the environment; the second explores several pertinent applications of plastics with environmental implications–packaging, paints and coatings, textiles, and agricultural film use. The third section discusses the behavior of plastics in some of the environments in which they are typically used, such as the outdoors, in biotic environments, or in fires. The final section consists of chapters on recycling and thermal treatment of plastics waste. Chapters include: Commodity Polymers Plastics in Transportation Biodegradation of Common Polymers Thermal Treatment of Polymer Waste Incineration of Plastics The contributors also focus on the effectiveness of recent technologies in mitigating environmental impacts, particularly those for managing plastics in the solid waste stream. Plastic and design engineers, polymer chemists, material scientists, and ecologists will find Plastics and the Environment to be a vital resource to this critical industry.

Download or read book Plastics Waste Management written by Nabil Mustafa and published by CRC Press. This book was released on 1993-04-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the structure and growth of the plastics industry, comprehensively displaying the complete cycle of plastics from raw materials to waste and solutions related to this waste - presenting practical cost scenarios for the collection and disposal of waste.;Examining the issue of plastics waste in a broad social and environmental context, Plastics Waste Management: considers the regulations imposed on waste disposal and aspects of pollution control acts; provides a technical overview of polymers, classifications, and properties as well as the plastics industry, polymer production, and consumption; addresses extrusion basics and polymers' compatibility in a mixture of plastic waste; describes the recycling of mixed plastics waste; and explores design considerations and product life cycles with respect to environmentally friendly products in packaging applications.;Furnishing more than 400 bibliographic citations, Plastics Waste Management is a reference for pollution control, plastics, environmental, polymer and chemical engineers; recycling facility operators; plastics designers; and upper-level undergraduate and graduate students in these disciplines.

Download or read book Sustainable Infrastructure Breakthroughs in Research and Practice written by Management Association, Information Resources and published by IGI Global. This book was released on 2019-11-01 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continued growth of any nation depends largely on the development of their built infrastructures and communities. By creating stable infrastructures, countries can more easily thrive in competitive international markets. Sustainable Infrastructure: Breakthroughs in Research and Practice examines sustainable development through the lens of transportation, waste management, land use planning, and governance. Highlighting a range of topics such as sustainable development, transportation planning, and regional and urban infrastructure planning, this publication is an ideal reference source for engineers, planners, government officials, developers, policymakers, legislators, researchers, academicians, and graduate-level students seeking current research on the latest trends in sustainable infrastructure.

Download or read book Reckoning with the U S Role in Global Ocean Plastic Waste written by National Academies of Sciences, Engineering, and Medicine and published by . This book was released on 2022-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: An estimated 8 million metric tons (MMT) of plastic waste enters the world's ocean each year - the equivalent of dumping a garbage truck of plastic waste into the ocean every minute. Plastic waste is now found in almost every marine habitat, from the ocean surface to deep sea sediments to the ocean's vast mid-water region, as well as the Great Lakes. This report responds to a request in the bipartisan Save Our Seas 2.0 Act for a scientific synthesis of the role of the United States both in contributing to and responding to global ocean plastic waste. The United States is a major producer of plastics and in 2016, generated more plastic waste by weight and per capita than any other nation. Although the U.S. solid waste management system is advanced, it is not sufficient to deter leakage into the environment. Reckoning with the U.S. Role in Global Ocean Plastic Waste calls for a national strategy by the end of 2022 to reduce the nation's contribution to global ocean plastic waste at every step - from production to its entry into the environment - including by substantially reducing U.S. solid waste generation. This report also recommends a nationally-coordinated and expanded monitoring system to track plastic pollution in order to understand the scales and sources of U.S. plastic waste, set reduction and management priorities, and measure progress.

Download or read book Handbook of Research on Waste Diversion and Minimization Technologies for the Industrial Sector written by Rathoure, Ashok K. and published by IGI Global. This book was released on 2021-01-08 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to various issues in the world including rapid urbanization and industrial processes, waste generation has reached levels that are becoming detrimental to the environment and the global population. Waste management has remained a challenging issue for many professional sectors as it is directly linked to an organization’s performance; however, the implementation of efficient and cost-effective waste minimization plans is the first step in improving the global environment. Innovative technologies in waste management are emerging and can help professionals looking to implement more efficient methods of pollution control. The Handbook of Research on Waste Diversion and Minimization Technologies for the Industrial Sector is a pivotal reference source that provides vital research on the application of modern pollution-control methodologies in industrialized environments. While highlighting topics such as life cycle assessment, bioremediation, and thermal waste treatment, this publication explores environmental risk reduction scenarios as well as sustainable waste-collecting solutions. This book is ideally designed for researchers, industrialists, environmentalists, practitioners, policymakers, scientists, students, and academicians seeking current research on innovative advancements in waste minimization techniques.

Download or read book Degradable Polymers Recycling and Plastics Waste Management written by Albertsson and published by CRC Press. This book was released on 2019-08-30 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the International Workshop on Controlled Life-Cycle of Polymeric Materials held in Stockholm, this work examines degradable polymers and the recycling of plastic materials. It highlights recent results on recycling and waste management, including topics such as renewable resources, degradation, processing and products, and environmental issues.

Download or read book Economic Policy Instruments for Plastic Waste written by Magnus Hennlock and published by Nordic Council of Ministers. This book was released on 2015-03-18 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieving a high quality of waste plastic materials and recycling processes is a key challenge in closing the resource loops for plastics. This report reviews the status and trends for plastic waste flows and treatment in Denmark, Finland, Norway and Sweden. Furthermore, it gives an overview of existing policy instruments and the main challenges for designing policy instruments for improved recycling of plastic waste in these Nordic countries. The report identifies potential market failures associated with closing the resource loops for plastics. It reviews the economics research literature on policy instrument design for achieving optimal recycling rates and makes policy recommendations from the Nordic perspective. Finally, it presents results from a survey on market conditions to managers in the recycling and plastic manufacturing industry in Sweden.

Download or read book Plastic Pollution written by Sivakumaran SIVARAMANAN and published by . This book was released on 2018-01-15 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic is a non- biodegradable organic polymer, which is very commonly used in materials, large amounts of discarded plastics accumulating in oceans as Garbage islands and in land as landfills or blocking streams and waterways. Leaching of waste plastics from land filling and fumes released during incineration resulting major health impacts to living things as well as polluting the air, water, and soil, burning PVC releases cancer causing dioxins and PCB. Addition to recycling waste plastics also used in production of energy or in co-processing. Oxo-degradable plastics end up in fragments which cannot be compostable and also resulting in particles that can cause bioaccumulation. This study analyses plastics, and their path way in the environment, it also figure out the hazardous effects of plastics to living things and to the environment, and ends with practically feasible solutions.

Download or read book Improving Markets for Recycled Plastics Trends Prospects and Policy Responses written by OECD and published by OECD Publishing. This book was released on 2018-05-24 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become one of the most prolific materials on the planet: in 2015 we produced about 380 million tonnes of plastics globally, up from 2 million tonnes in the 1950s. Yet today only 15% of this plastic waste is collected and recycled into secondary plastics globally each year. This ...