Download or read book Polymer Process Engineering 99 written by Phil D. Coates and published by CRC Press. This book was released on 1999 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of an international conference held in June 1999 which was designed to address the issues: Where is polymer processing going? and What are the key trends in technology at the end of the 20th century in this vital international industry? Papers cover leading edge developments in polymer processing technology, in-process measurements and process flow modelling and control.

Download or read book Polymer Process Engineering written by R. Griskey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are ubiquitous and pervasive in industry, science, and technology. These giant molecules have great significance not only in terms of products such as plastics, films, elastomers, fibers, adhesives, and coatings but also less ob viously though none the less importantly in many leading industries (aerospace, electronics, automotive, biomedical, etc.). Well over half the chemists and chem ical engineers who graduate in the United States will at some time work in the polymer industries. If the professionals working with polymers in the other in dustries are taken into account, the overall number swells to a much greater total. It is obvious that knowledge and understanding of polymers is essential for any engineer or scientist whose professional activities involve them with these macromolecules. Not too long ago, formal education relating to polymers was very limited, indeed, almost nonexistent. Speaking from a personal viewpoint, I can recall my first job after completing my Ph.D. The job with E.I. Du Pont de Nemours dealt with polymers, an area in which I had no university training. There were no courses in polymers offered at my alma mater. My experience, incidentally, was the rule and not the exception.

Download or read book Polymer Process Engineering 01 written by Phil D. Coates and published by Woodhead Publishing Limited. This book was released on 2001 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Engineering Science and Viscoelasticity written by Hal F. Brinson and published by Springer. This book was released on 2015-01-24 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified mechanics and materials perspective on polymers: both the mathematics of viscoelasticity theory as well as the physical mechanisms behind polymer deformation processes. Introductory material on fundamental mechanics is included to provide a continuous baseline for readers from all disciplines. Introductory material on the chemical and molecular basis of polymers is also included, which is essential to the understanding of the thermomechanical response. This self-contained text covers the viscoelastic characterization of polymers including constitutive modeling, experimental methods, thermal response, and stress and failure analysis. Example problems are provided within the text as well as at the end of each chapter. New to this edition: · One new chapter on the use of nano-material inclusions for structural polymer applications and applications such as fiber-reinforced polymers and adhesively bonded structures · Brings up-to-date polymer production and sales data and equipment and procedures for evaluating polymer characterization and classification · The work serves as a comprehensive reference for advanced seniors seeking graduate level courses, first and second year graduate students, and practicing engineers

Download or read book Polyoxymethylene Handbook written by Sigrid Lüftl and published by John Wiley & Sons. This book was released on 2014-03-14 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent, unique, and up-to-date reference book on polyoxymethylene, its compounds, and nanocomposites, specifically dealing with synthesis, characterization, processing, morphology, and applications Polyoxymethylene Handbook: Structure, Properties, Applications, and Their Nanocomposites summarizes many of the state-of-the-art technological and research accomplishments in the area of polyoxymethylene (POM). It discusses in length the polymerization and manufacture of polyoxymethylene and various types of additives, as well as the structure and crystallization behavior of POM and its thermal, physical, mechanical, flame retardant, chemical, electrical, and optical properties. The environmental impact of POM is also addressed. The 15 chapters in the handbook are written by prominent researchers from industry, academia, and government/private research laboratories across the globe. Because so few books have ever been published on polyoxymethylene, the handbook is a very valuable reference tool that truly serves as a “one stop” resource for readers and users seeking solutions to both fundamental and applied problems.

Download or read book Polymer Process Engineering written by Eric A. Grulke and published by Prentice Hall. This book was released on 1994 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of both the basic science composition, morphology, physical states, and properties of polymers as well as quantitative engineering tools required to design polymer systems.

Download or read book Carbon Dioxide Recovery and Utilization written by M. Aresta and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Dioxide Recovery and Utilization is a complete and informative resource on the carbon dioxide sources and market at the European Union level, with reference to the world situation. The book covers the following themes: - Sources of carbon dioxide and their purity, - Market of carbon dioxide and its uses, - Separation techniques of carbon dioxide from flue gases, - Analysis of the potential of each technique and application, - Basic science and technology of supercritical CO2, - Reactions in supercritical CO2 and its use as reactive solvent, - Utilization of CO2 in the synthesis of chemicals with low energy input, - Conversion of CO2 into fuels: existing techniques, - Dry reforming of methane, - Assessment of the use of carbon dioxide for the synthesis of methanol. This book is unique in providing integrated information and a perspective on innovative technologies for the use of carbon dioxide. The book is suitable for use as a textbook for courses in chemical engineering and chemistry. It is also of great interest as a general reference for those involved with technologies for avoiding carbon dioxide production and for economists. This is an invaluable reference for specialists on synthetic chemistry, gas separation, supercritical fluids, carbon dioxide marketing, renewable energy and sustainable development. In addition, it will be useful for those working in the chemical industry and for policy makers for carbon dioxide mitigation, innovative technologies, carbon recycling, and power generation.

Download or read book Fundamentals of Polymer Engineering Third Edition written by Anil Kumar and published by CRC Press. This book was released on 2018-12-07 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring the chemistry of synthesis, mechanisms of polymerization, reaction engineering of step-growth and chain-growth polymerization, polymer characterization, thermodynamics and structural, mechanical, thermal and transport behavior of polymers as melts, solutions and solids, Fundamentals of Polymer Engineering, Third Edition covers essential concepts and breakthroughs in reactor design and polymer production and processing. It contains modern theories and real-world examples for a clear understanding of polymer function and development. This fully updated edition addresses new materials, applications, processing techniques, and interpretations of data in the field of polymer science. It discusses the conversion of biomass and coal to plastics and fuels, the use of porous polymers and membranes for water purification, and the use of polymeric membranes in fuel cells. Recent developments are brought to light in detail, and there are new sections on the improvement of barrier properties of polymers, constitutive equations for polymer melts, additive manufacturing and polymer recycling. This textbook is aimed at senior undergraduate students and first year graduate students in polymer engineering and science courses, as well as professional engineers, scientists, and chemists. Examples and problems are included at the end of each chapter for concept reinforcement.

Download or read book Polymer Processing written by Abhijit Bandyopadhyay and published by CRC Press. This book was released on 2023-10-02 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers polymer 3D printing through basics of technique and its implementation. It begins with the discussion on fundamentals of new-age printing, know-how of technology, methodology of printing, and product design perspectives. It includes aspects of CAD along with uses of Slicer software, image analysis software and MATLAB® programming in 3D printing of polymers. It covers choice of polymers for printing subject to their structure–property relationship, troubleshooting during printing, and possible uses of waste plastics and other waste materials. Key Features Explores polymeric material printing and design. Provides information on the potential for the transformation and manufacturing, reuse and recycling of polymeric material. Includes comparison of 3D printing and injection moulding. Discusses CAD design and pertinent scaling-up process related to polymers. Offers basic strategies for improvement and troubleshooting of 3D printing. This book is aimed at professionals and graduate students in polymer and mechanical engineering and materials science and engineering.

Download or read book Micro Process Engineering written by Norbert Kockmann and published by John Wiley & Sons. This book was released on 2013-03-26 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of 'Micro Process Engineering' was originally published in the successful series 'Advanced Micro & Nanosystems'. Authors from leading industrial players and research institutions present a concise and didactical introduction to Micro Process Engineering, the combination of microtechnology and process engineering into a most promising and powerful tool for revolutionizing chemical processes and industrial mass production of bulk materials, fine chemicals, pharmaceuticals and many other products. The book takes the readers from the fundamentals of engineering methods, transport processes, and fluid dynamics to device conception, simulation and modelling, control interfaces and issues of modularity and compatibility. Fabrication strategies and techniques are examined next, focused on the fabrication of suitable microcomponents from various materials such as metals, polymers, silicon, ceramics and glass. The book concludes with actual applications and operational aspects of micro process systems, giving broad coverage to industrial efforts in America, Europe and Asia as well as laboratory equipment and education.

Download or read book Plastics Processing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book provides guidelines for maximizing plastics proc essing efficiency in the manufacture of all types of products, using all types of plastics. A practical approach is employed to present fundamental, yet comprehensive, coverage of processing concepts. The information and data presented by the many tables and figures interrelate the different variables that affect injection molding, extrusion, blow molding, thermoforming, compression molding, reinforced plastics molding, rotational molding, re action injection molding, coining, casting, and other processes. The text presents a great number of problems pertaining to different phases of processing. Solutions are provided that will meet product per formance requirements at the lowest cost. Many of the processing variables and their behaviors in the different processes are the same, as they all in volve basic conditions of temperature, time, and pressure. The book begins with information applicable to all processes, on topics such as melt soft ening flow and controls; all processes fit into an overall scheme that re quires the interaction and proper control of systems. Individual processes are reviewed to show the effects of changing different variables to meet the goal of zero defects. The content is arranged to provide a natural progres sion from simple to complex situations, which range from control of a sin gle manual machine to simulation of sophisticated computerized processes that interface with many different processing functions.

Download or read book Polymer Processing Instabilities written by Savvas G. Hatzikiriakos and published by CRC Press. This book was released on 2004-11-30 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Processing Instabilities: Control and Understanding offers a practical understanding of the various flows that occur during the processing of polymer melts. The book pays particular attention to flow instabilities that affect the rate of production and the methods used to prevent and eliminate flow instabilities in order to increase product

Download or read book Supercritical Fluid Technology for Drug Product Development written by Peter York and published by CRC Press. This book was released on 2004-03-23 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interconnecting the fundamentals of supercritical fluid (SCF) technologies, their current and anticipated utility in drug delivery, and process engineering advances from related methodological domains and pharmaceutical applications, this volume unlocks the potential of supercritical fluids to further the development of improved pharmaceutical prod

Download or read book Multi material Injection Moulding written by V. Goodship and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many variations of injection moulding have been developed and one of the rapidly expanding fields is multi-material injection moulding. This review looks at the many techniques being used, from the terminology to case studies. The three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. The basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology are described.

Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.

Download or read book Processing of Polymers written by Chris Defonseka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-09-21 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are converted into finished products through a series of steps which include mixing in additives and various types of forming. Following an introduction to polymer science and its importance to various fields, the author describes these processes from a practical, application-oriented perspective. Global suppliers of raw materials, machinery and equipment are also given, making this book an invaluable resource for industry practitioners.

Download or read book Who s Who in Plastics Polymers First Edition written by James P. Harrington and published by CRC Press. This book was released on 2000-05-09 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first edition of a unique new plastics industry resource: Who's Who in Plastics & Polymers. It is the only biographical directory of its kind and includes contact, affiliation and background information on more than 3300 individuals who are active leaders in this industry and related organizations. The biographical directory is in alphabetical order by individual name. After each individual name, current affiliation and contact information is provided. This includes job title, full name of affiliation (e.g., business, university, association, research institute), business address, and electronic contacts-telephone, fax, e-mail and Web site. Home addresses and contacts are also provided for most of the entries. In the biographical summary section for each individual, the following information is provided: date and place of birth, education and educational achievements, work experience including company or other organization names, positions held and time periods. Also included in this section are the number of patents awarded, articles, and book chapters authored, and conference sessions chaired. Other information includes titles of books edited or written by the individual, listing of conferences where the person had a leadership position, and listing of memberships and positions held in professional organizations. Finally, professional and civic awards are listed. Indexes provide listings of individuals by company or other organization name, and also by geographical location. Who's Who in Plastics & Polymers is now published in a limited edition of 1,000 copies. This edition will not be reprinted. To be sure of receiving your copy, please act now. Information on ordering follows sample pages on the reverse.