Download or read book Polymer Particle Size Distributions in Continuous Emulsion Polymerization written by James Otto Funderburk and published by . This book was released on 1969 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Particle Size Distribution in Continuous Emulsion Polymerization Through a Modified Population Balance Approach written by Ying-Yuh Lu and published by . This book was released on 1984 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed mathematical model for particle size distribution in continuous emulsion polymerization of styrene and vinyl acetate is proposed on the basis of the population balance in the presence of several kinetic and mass transfer processes. This study is limited to the Smith-Ewart case II, which assumes instantaneous free radical termination within polymer particles. Radical desorption mechanism from polymer particles is included in the model and the desorption rate is formulated from the diffusion theory which suggests that the rate coefficient should be inversely proportional to the surface area of polymer particles.
Download or read book Process to Establish Specific Particle Size Distributions in Continuous Emulsion Polymerization written by R. Kakuschke and published by . This book was released on 1984 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molecular Weight and Particle Size Distribution Prediction in a Continuous Stirred Tank Emulsion Polymerization Reactors written by Paul Stephen Inglish and published by . This book was released on 1973 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emulsion Polymerization and Emulsion Polymers written by Peter A. Lovell and published by John Wiley & Sons. This book was released on 1997-04-03 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion Polymerization and Emulsion Polymers Edited by Peter A. Lovell Manchester Materials Science Centre, UMIST, Manchester, UK and Mohamed S. El-Aasser Emulsion Polymers Institute and Department of Chemical Engineering, Lehigh University, Bethlehem, PA, USA Emulsion polymerization is a technologically and commercially important reaction used to produce synthetic polymers and latexes for a wide range of applications. It is the basis of a massive global industry that is expanding due to the versatility of the reaction and the greater realization of the ability to control properties of the polymer latexes produced. Emulsion Polymerization and Emulsion Polymers provides an up-to-date treatment of both academic and industrial aspects of the subject in a single self-contained volume. Established knowledge is integrated with latest developments and introductory chapters to give a state-of-the-art summary which is also suitable as a broad based introduction to the field. The individual chapters have been written by specialists from academia and industry and are presented in a way which ensures that the book will be of equal value to experienced researchers and students.
Download or read book The Dynamics of Continuous Emulsion Polymerization Reactors written by Francis Joseph Schork and published by . This book was released on 1981 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Size Distribution Dynamics in Emulsion Polymerization written by Donald Allen Cauley and published by . This book was released on 1980 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.
Download or read book Principles and Applications of Emulsion Polymerization written by Chorng-Shyan Chern and published by John Wiley & Sons. This book was released on 2008-10-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of methods of emulsion polymerization This book provides a comprehensive reference on emulsion polymerization methods,focusing on the fundamental mechanisms and kinetics of each process, as well as howthey can be applied to the manufacture of environmentally friendly polymeric materials. Topics covered include: Conventional emulsion polymerization Miniemulsion polymerization Microemulsion polymerization Industrial emulsion polymerization processes (primarily the semibatch and continuous reactions systems) The role of various colloidal phenomena in emulsion polymerization Important end-use properties of emulsion polymer (latex) products Information on industrial applications in paints, coatings, adhesives, paper and board, and more This is a hands-on reference for graduate students and professionals in polymerchemistry, chemical engineering, and materials science who are involved in researchon coatings, adhesives, rubber, latex, paints, finishes, and other materials that can becreated using various methods of emulsion polymerization.
Download or read book Radiation Induced Emulsion Polymerization written by V. T. Stannett and published by . This book was released on 1964 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emulsion Polymerization written by Robert G. Gilbert and published by . This book was released on 1995 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a modern overview of the principles governing emulsion polymerization, a topic of both academic and industrial importance. The reader is provided with the mathematical, physical and technical tools to understand the mechanisms and physical chemistry of these systems, particularly the major advances of the last 15 years. The book describes the mechanisms that govern the various aspects of an emulsion polymerization, and how from appropriate experimental studies, the dominant mechanisms in a particular system may be deduced. From such deductions, the means are developed whereby the properties of the result of the emulsion polymerization can be quantitatively modelled and trends can be qualitatively understood and predicted. This book opens the way to the intelligent, knowledge-based design that is the future for improvements and innovations in products and processes from this important technology. Provides a thoroughly up-to-date overview of the principles and practices of emulsion polymerization Contains mathematical, physical, and technical tools which enable the reader to understand the mechanisms and physical chemistry used in the field Includes extensive exercises with model answers
Download or read book Emulsion Polymerization and Its Applications in Industry written by V. I. Eliseeva and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a large body of Soviet work on emulsion polymerization, spanning a period of over three decades, that has been published primarily in the Russian language. Most of this has remained untranslated into English and hence un available to most other scientists. The value of this book lies primarily in the fact that it brings together the most important of these Soviet contributions, along with comment and analysis by the authors, who may be considered among the foremost authorities in this field in the Soviet Union. But the hundreds of literature citations go far beyond the borders of the Soviet Union and serve as an excellent bibliography of the world literature on emulsion polymerization up to the time this book was written. The book covers both fundamental and applied aspects. In the former are included discussions of particle formation mechanisms, a comprehensive theory of emulsion polymerization, copolymerization of polar monomers, and particle morphology and its implications with regard to derived film properties. Among the applied aspects are discussions of continuous emulsion polymerization, both tubular reactors and continuous stirred tank cascades, and various aspects con cerning the manufacture of some of the most important monomers, such as styrene, butadiene, vinyl acetate, methyl methacrylate, acrylonitrile, and chloroprene. This book will be an indispensable reference source for scientists who are entering the field as well as those who are experienced and who have wanted a ready access to this large body of literature.
Download or read book Simulation and Stability of Continuous Emulsion Polymerization Reactors written by James Blake Rawlings and published by . This book was released on 1985 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Size Distribution in Isothermal Batch Emulsion Polymerization written by Bhavin R. Patel and published by . This book was released on 1987 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2013-05-13 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and Technology of Emulsion Polymerisation 2e provides a practical and intuitive explanation of emulsion polymerization, in combination with both conventional and controlled radical polymerization. For those working in industry, coupling theory with everyday practice can be difficult. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, the book explains how the principles relate to practical application. The second edition of this book includes a new chapter on morphology of latex particles, a rapidly progressing area where modelling the thermodynamic and kinetic aspects of phase separation and morphology has developed into a mature and powerful tool to predict and control morphology of latex particles. Another area that is rapidly progressing is the application of controlled radical polymerisation in emulsion polymerization. Controlled radical polymerisation is used in aiding encapsulation of inorganic particles like pigment particles and clay platelets. These latest developments are included in the second edition.
Download or read book Modeling Validation and Time Optimal Control of Particle Size Distribution in Emulsion Polymerization written by Mehdi Rajabi-Hamane and published by . This book was released on 2007 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Prediction of Particle Size and Molecular Weight Distributions in Emulsion Polymerization written by Donald Charles Sundberg and published by . This book was released on 1970 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
