Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.
Download or read book Molecular Mobility in Deforming Polymer Glasses written by Nikhil Padhye and published by Springer Nature. This book was released on 2021-10-15 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges disparate fields in an exploration of the phenomena and applications surrounding molecular mobility in glassy materials experiencing inelastic deformation. The subjects of plastic deformation and polymer motion/interdiffusion currently belong to the two different fields of continuum mechanics and polymer physics, respectively. However, molecular motion associated with plastic deformation is a key ingredient to gain fundamental understanding, both at the macroscopic and microscopic level. This short monograph provides necessary background in the aforementioned fields before addressing the topic of molecular mobility accompanied by macroscopic inelastic deformation in an accessible and easy-to-understand manner. A new phenomenon of solid-state deformation-induced bonding in polymers is discussed in detail, along with some broad implications in several manufacturing sectors. Open questions pertaining to mechanisms, mechanics, and modeling of deformation-induced bonding in polymers are presented. The book’s clear language and careful explanations will speak to readers of diverse backgrounds.
Download or read book Synthesis and Properties of Polymers written by Gennadiĭ Efremovich Zaikov and published by Nova Publishers. This book was released on 1996 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis & Properties Of Polymers
Download or read book Polymer Yearbook 15 written by Richard A. Pethrick and published by CRC Press. This book was released on 1998-11-26 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains reviews on state-of-the-art Japanese research presented in the annual Spring and Autumn meetings of the Japanese Polymer Science Society. The aim of this section is to make information on the progress of Japanese Polymer Science, and on topics of current interest to polymer scientists in Japan, more easily available worldwide.
Download or read book Fundamentals of Polymer Science for Engineers written by Stoyko Fakirov and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Polymer Science for Engineers Filling a gap in the market, this textbook provides a concise, yet thorough introduction to polymer science for advanced engineering students and practitioners, focusing on the chemical, physical and materials science aspects that are most relevant for engineering applications. After covering polymer synthesis and properties, the major section of the book is devoted to polymeric materials, such as thermoplastics and polymer composites, polymer processing such as injection molding and extrusion, and methods for large-scale polymer characterization. The text concludes with an overview of engineering plastics. The emphasis throughout is on application-relevant topics, and the author focuses on real-life, industry-relevant polymeric materials.
Download or read book Disorder Effects on Relaxational Processes written by Ranko Richert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of non-crystalline materials has seen the emergence of many challeng ing problems during its long history. In recent years, the interest in polymeric and biological disordered matter has stimulated new activities which in turn have enlarged the organic and inorganic glass community. The current research fields and recent progress have extended our knowledge of the rich phenomenol ogy of glassy systems, where the role of disorder is fundamental for the underlying microscopic dynamics. In addition, despite the lack of a unified theory, many interesting theoretical models have recently evolved. The present volume offers the reader a collection of topics representing the current state in the understanding of disorder effects as well as a survey of the basic problems and phenomena involved. The task of compiling a book devoted to disordered systems has benefited much from a seminar organized by the W.-E. Heraeus Foundation in Bad Honnef in April 1992, where we had the opportunity to discuss the project with most of the authors. Here we wish to thank the Heraeus Foundation for their support, and the authors and Springer-Verlag, especially Dr. Marion Hertel, for the pleasant cooperation.
Download or read book Mechanical Properties of Model Polymer Glasses written by Kenji Yoshimoto and published by . This book was released on 2005 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Motion in Polymer Glasses written by and published by . This book was released on 1980 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Craze Microstructure in Polymer Glasses as a Function of Environment Temperature and Molecular Topology written by Philip Miller and published by . This book was released on 1987 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inorganic Polymeric Glasses written by Richard C. Ropp and published by Elsevier. This book was released on 2013-10-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author describes a novel method of preparing hydrolysis-stable non-silicate glasses which is based on experimental work accomplished over the past twenty years. As such, the method is the beginning of a new approach to glass-making by the use of a molecularly-polymerizable precursor. The book elucidates the technical details required to produce such molecularly-polymerized glasses from carefully prepared inorganic molecular monomers. Essentially, only silicate-based glasses have been known to be stable, whereas non-silicate glasses could not be attributed with such properties. Such glasses have, therefore, not found widespread usage in industry. The new phosphate glasses described here exhibit stabilities superior to many of the silicate glasses. For example, the nuclear-waste glass shows no measurable loss at all in boiling water, something entirely foreign to the zinc borosilicate glasses developed for nuclear waste encapsulation in the U.S. by Battelle-Northwest. The exceptional stability of the new glasses is achieved by selecting an inorganic compound capable of being polymerized, and then causing it to polymerize in a proper manner, in the absence of chain-stoppers. To obtain glasses equal or superior in hydrolysis stability to silicate-based systems it is imperative to employ molecular polymerization in situ, starting from carefully prepared precursors of exact stoichiometric proportion. Researchers in glass and glass properties will find this volume extremely useful and those involved in organic polymers will be intrigued by the similarities and disparities of the two systems.
Download or read book The Physics of Glassy Polymers written by R. N. Haward and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work sets out to provide an up-to-date account of the physical properties and structure of polymers in the glassy state. Properties measured above the glass transition temperature are therefore included only in so far as is necessary for the treatment of the glass transition process. This approach to the subject therefore excludes any detailed account of rubber elasticity or melt rheology or of the structure and conformation of the long chain molecule in solution, although knowledge derived from this field is assumed where required. Major emphasis is placed on structural and mechanical properties, although a number of other physical properties are included. Naturally the different authors contributing to the book write mainly from their own particular points of view and where there are several widely accepted theoretical approaches to a subject, these are sometimes provided in different chapters which will necessarily overlap to a significant extent. For example, the main theoretical presentation on the subject of glass transition is given in Chapter 1. This is supplemented by accounts of the free volume theory in Chapter 3 and in the Introduction, and a short account of the work of Gibbs and DiMarzio, also in Chapter 3. Similarly, there is material on solvent cracking in Chapters 7 and 9, though the two workers approach the subject from opposite directions. Every effort has therefore been made to encourage cross-referencing between different chapters.
Download or read book Yield and Relaxation in Polymeric Glasses written by Robert Howard Beck and published by . This book was released on 1971 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Properties of Glassy Polymers written by Martin R. Tant and published by . This book was released on 1998 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: In twenty-nine chapters by leading authorities, Structure and Properties of Glassy Polymers provides readers with comprehensive coverage of basic and applied research on glass polymers as well as a wealth of information on current topics such as molecular modeling, characterization, polymer glasses in confined spaces, and conducting glass polymers. The characterization techniques presented include temperature-modulated differential scanning calorimetry, dielectric loss spectroscopy, photochemical hole burning, positron annihilation lifetime spectroscopy, and transient current generation.
Download or read book Encyclopedia of Materials written by K. H. J. Buschow and published by . This book was released on 2001 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanyind CR-ROM conrtains The Encyclopedia of Materials Science and Technology on a web access disc.
Download or read book Encyclopedia of Polymer Blends Volume 3 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this Encyclopedia imparts knowledge of fundamental principles and their applications for academicians, scientists and researchers, while informing engineers, industrialists and entrepreneurs of the current state of the technology and its utilization. The most comprehensive source on polymer blends available on the market Offers a complete and timely overview of the topic Each article presents up to date research & development on a topic and its basic principles and applications, integrates case studies, laboratory and pilot plant experiments, and gives due reference to published and patented literature Equips academics, scientists and researchers with knowledge of fundamentals principles and their applications, and informs the engineers, industrialists and entrepreneurs about the state of the art technology and its applications
Download or read book Prediction of Glass melt Behavior and Penetrant Sorption Thermodynamics in Vinyl Polymers Via Molecular Simulations written by Travis David Boone and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Science written by and published by . This book was released on 2004 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
