Download or read book Industrial Pollution Control written by Nancy J. Sell and published by John Wiley & Sons. This book was released on 1992-11-11 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Pollution Control: Issues and Techniques Second Edition Nancy J. Sell This revised guide incorporates all the important information on pollution sources, control methods, and pollution regulations generated since publication of the previous edition in 1981. This edition surveys the impacts of every type of pollution on health, plants, materials, and weather. It discusses how different types of pollution are produced, laws governing specific emissions, and both existing and emerging air, water, and solid waste control techniques. Detailed sections zero in on processing methods, pollution production, and control methods in specific industries, including chemical, physical, and economic factors that inhibit better pollution control. Case studies offer insights into processes that directly minimize emissions or indirectly reduce them by decreasing energy needs. Pollution issues of iron and steel manufacturing, foundry operations, metals finishing, cement manufacture, glass manufacture, paper and pulp, food processing, brewing, tanning, and chemical industries are probed in depth. Among the new pollution control strategies covered are: * Regulations, treatment techniques, and disposal methods for hazardous wastes * Direct steelmaking processes that reduce pollution * Modified glassmaking furnaces that decrease pollution * Non-chlorine pulp bleaching sequences that curtail production of toxic substances such as dioxin * Secondary fiber utilization and reduction of PCB emissions * Resource recovery from sludges and ashes * Chemical spill containment and cleanup * Uses of degradation and recycling to reduce plastics waste Coverage of the impact of U.S. regulations, status of the U.S. environment, continuing problems, economic costs, and cost-benefit issues further increases the value of this source to environmental engineers and scientists working for the EPA, state regulatory agencies, or consulting engineering firms. This guide is also a vital reference for environmentalists working with advocacy groups, and environmental or process engineers in industry.

Download or read book Air Pollution Aspects of the Iron and Steel Industry written by Jean J. Schueneman and published by . This book was released on 1963 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings Symposium on Iron and Steel Pollution Abatement Technology for 1980 written by and published by . This book was released on 1981 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Air Pollution Aspects of Emission Sources Iron and Steel Mills written by Air Pollution Technical Information Center and published by . This book was released on 1972 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Complete Guide on Industrial Pollution Control written by H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2011-10-02 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrialization is the process of social and economic change that transforms a human group from a pre-industrial society into an industrial one. It is a part of a wider modernization process, where social change and economic development are closely related with technological innovation, particularly with the development of large scale energy and metallurgy production. Industrial pollution hurts the environment in a range of ways, and it has a negative impact on human lives and health. Pollutants can kill animals and plants, imbalance ecosystems, degrade air quality radically, damage buildings, and generally degrade quality of life. India is a home to many industries. The sectors include Iron and Steel, Pulp and Paper, Food Processing, Chemicals, Aluminium Industry, Cement, Pharmaceuticals, Machine tools, Surface finishing Industries etc. However, the industrial growth happening at a breakneck speed has resulted in a significant contribution to the toxicity in the environment. Therefore industrial activities should comply with regulatory norms for prevention and control of pollution. There have been many guidelines for the industries and the pollution caused by them. The setup and implementation of these guidelines is a joint responsibility of the central and state governments along with the Central Pollution Control Board to curb such emissions. At present, the control of pollution from industrial installations remains a key issue in India. As urbanisation expands and cities grow the need to deal with the environmental impact becomes even more important to ensure sustainable development. This also entails handling increasing volumes of waste water. Efficient wastewater management exploiting the capacity optimally requires a thorough understanding of the pollutions sources origin and substance. Hence pollution sources must be mapped and identified. This book is designed to assist in the identification and implementation of a cost effective program for industrial pollution monitoring, control, and abatement within the context of institutional and financial constraints present in India. The book is a complete guide on industrial pollution control in important industries like Iron and Steel, Pulp and Paper, Food processing, Chemicals, Aluminium industry, Cement, Pharmaceuticals, Paint industry and many more. This book will be very resourceful to all its readers, students, entrepreneurs, technical institution, scientist, etc. TAGS How to Start Industrial Pollution management Industry in India, Industrial Pollution management Industry in India, Industrial Pollution management & Industrial Pollution management Based Profitable Projects, Industrial Pollution management Projects, Small Industrial Pollution management Projects, Starting a Industrial Pollution management Business, How to Start a Industrial Pollution management Business, Industrial Pollution management Based Small Scale Industries Projects, new small scale ideas in Industrial Pollution management industry, NPCS, Niir, Process technology books, Business consultancy, Business consultant, Project identification and selection, Preparation of Project Profiles, Startup, Business guidance, Business guidance to clients, Startup Project for Industrial Pollution management, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for a Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Start-up Business Plan for Industrial Pollution management, Start Up India, Stand Up India, Industrial Pollution management Making Small Business Manufacturing, Small scale Industrial Pollution management machine, Industrial Pollution management making machine factory, Modern small and cottage scale industries, Profitable small and cottage scale industries, Setting up and opening your Industrial Pollution management Business, How to Start a Industrial Pollution management Business?, How to start a successful Industrial Pollution management business, Small scale Commercial Industrial Pollution management making, Best small and cottage scale industries, Industrial Pollution management Business, Profitable Small Scale Manufacturing, Treatment to Reduce Disposal , Economic Evaluation in Pollution Prevention Programs, Machining and Other Metal Working Operations , Solvents Used for Cleaning, Refrigeration and Other Uses , Metal Plating and Surface Finishing , Painting and Coating , Removal of Paint and Coatings , Motor Oil and Antifreeze, Aluminium Industry, Construction and Demolition, Electric Utilities, Food Processing, Iron and Steel, Petroleum Exploration and Refining, Pharmaceuticals, Pulp and Paper Industry, Air Pollution Control Equipment, How to control industrial pollution, Waste Treatment and Disposal Methods, reuse, recycling, resource recovery, treatment and disposal, types of waste disposal methods, solid waste disposal methods, waste treatment methods, waste disposal problems, Electroplating & Surface Finishing, metal surface finishing process, surface treatment process, environmental regulation, chemical treatment, cleaning and degreasing, cold cleaning, vapor cleaning, precision cleaning, refrigerant, Nickel Plating, chrome plating, cadmium and zinc plating, copper, gold, silver, and tin plating, techniques to reduce plating waste, electro dialysis, powder coating, electrostatic painting, rendering, scalding

Download or read book The Iron and Steel Workforce of the Twenty first Century written by and published by International Labour Organization. This book was released on 1997 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Managing and disposing of residues from environmental control facilities in the steel industry written by László Pásztor and published by . This book was released on 1976 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pollution Control Technologies Volume I written by Bhaskar Nath and published by EOLSS Publications. This book was released on 2009-09-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution Control Technologies is a component of Encyclopedia of Environmental and Ecological Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The volume on Pollution Control Technologies focuses largely concerned with strategies for pollution reduction, and pollution prevention if at all possible, using scientific and technological methods. Focusing primarily but not exclusively on air pollution, the Theme is written in simple English, avoiding both mathematical and chemical equations as far as possible to facilitate effective and widest possible dissemination. The content of the Theme provides the essential aspects and a myriad of issues of great relevance to our world such as: Control of Particulate Matter in Gaseous Emissions; Control of Gaseous Emissions; Pollution Control through Efficient Combustion Technology; Pollution Control in Industrial Processes; Pollution Control in Transportation, which are then expanded into multiple subtopics, each as a chapter. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs

Download or read book Resources and Pollution Control written by United States. Environmental Protection Agency. Office of Environmental Processes and Effects Research and published by . This book was released on 1979 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the shearer removes the winter coat from the sheep, the spinner, weaver, and knitter, each in turn, do their part to produce the wool sweater.

Download or read book Handbook of Environmental Materials Management written by Chaudhery Mustansar Hussain and published by Springer. This book was released on 2019-06-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work analyzes and assesses global environmental management techniques for environmental materials with a focus on their performance and economic benefits, proposing eco-friendly solutions and designating policies that will sustain the environment for future generations. It addresses management of environmental materials as not only a complex anthropogenic problem, but also as an expensive problem that needs to be managed sustainably. Simultaneously, it considers the environmental and economic benefits involved in the high levels of investment and operation costs required to develop effective materials collection and management systems in modern society.

Download or read book Water Requirements of the Iron and Steel Industry written by Faulkner B. Walling and published by . This book was released on 1967 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide to Research in Air Pollution Projects Active in Calendar Year 1969 Seventh Edition written by Pennsylvania State University. Center for Air Environment Studies and published by . This book was released on 1970 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waste Treatment in the Metal Manufacturing Forming Coating and Finishing Industries written by Lawrence K. Wang and published by CRC Press. This book was released on 2016-04-19 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive in its scope and directly applicable to daily waste management problems of specific industries, Waste Treatment in the Metal Manufacturing, Forming, Coating, and Finishing Industries covers hazardous industrial waste treatment, renovation, and reuse in the metal manufacturing, forming, coating, enameling, and finishing industries. It

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1979 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Appropriate Waste Management for Developing Countries written by Kriton Curi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of protecting the environment against pollution is an objective which gained international acceptance in the recent years. According to the first principle of the Declaration of the United Nations Conference on the Human Environment which took place in Stockholm in 1972, "man .... bears a solemn responsibility to protect and improve the environment for present and future genera tions". The United Nations again in their desire to improve the sanitation conditions allover the world decided to proclaim the period between 1981-1990 as the "International Drinking Water Supply and Sanitation Decade." Although attempts have been made by inter national organizations to prevent pollution, it is difficult to say that these attempts gave satisfactory results in developing countries. The most common reasons of failure are: a) To find solutions to their environmental problems, develop ing countries usually seek the assistance of engineers and scientists from developed countries. Many times, how ever, either out of ignorance of the local condition or due to financial motivations, these experts come out with solutions which are far from being considered as the "most appropriate." As a result, the basic objective of protecting the environment is not achieved. b) Attempts made by developed countries to "export" their wastes - especially the hazardous ones - to the developing world, is another danger - and sometimes reason of failure encountered in the field of Environmental Management.

Download or read book Guide to Research in Air Pollution written by and published by . This book was released on 1969 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ENERGY AND ENVIRONMENTAL MANAGEMENT IN METALLURGICAL INDUSTRIES written by R. C. GUPTA and published by PHI Learning Pvt. Ltd.. This book was released on 2012-12-06 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book deals with the environmental aspects of metallurgical industries, including ferrous (iron and steel, DRI units, EAF units, ferroalloys and foundries) and non-ferrous (aluminium, copper, lead and zinc) plants. The text, comprising of eight chapters, discusses fundamental aspects of environment management, various energy sources available on the earth and environment awareness required for sustained economic growth. The book provides a thorough understanding of pollution sources in metallurgical industries and their abatement techniques. It also provides details of energy management in metal industry and enumerates factors for metallurgical plant location and layout. Furthermore, it presents health and safety guidelines for metallurgical professionals. The text concludes with discussion on basic legislations related to environment and labour. This book is primarily designed for undergraduate students of metallurgical engineering. Besides, it will also be useful as a ready reference source to professionals associated with metallurgical industries. KEY FEATURES Coverage of various types of environmental issues such as air emission, toxic effluents, solid waste, thermal discharge, noise and radiation. Analysis of renewable and non-renewable energy sources on the earth with current energy usage pattern and future consumption pattern. Description of various activities in the metallurgical units along with discussion of sources of pollution and abatement techniques. Guidelines for the plant location and layout. Basic information about labour health and safety, environmental legislations, labour laws, ISO 14000, carbon credit, etc.