Download or read book Metals and Their Alloys written by Charles Vickers and published by . This book was released on 1923 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pt Platinum written by Gary J.K. Acres and published by Springer. This book was released on 1985-12-30 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like most supplement volumes of the platinum-group metal series,Platinum Suppl. Vol. A 1 has been written by an international team of specialists. It comprises technological data of all six platinum-group metals and their technically relevant alloys and compounds. The volume starts with a review on the recovery of the platinum-group metals (23 pages); the next 42 pages are devoted to processes for separating and refining the PGM in order to obtain metals of high purity. The electrodeposition of the PGM and their alloys is treated on 26 pages.The by far most extensive section deals with PGMand their alloys and compounds in catalysis. After a historicalsurvey and alist of important reviewson PGMcatalysis,the catalytic properties of the metals are treated in a general way, followed by unsupported metals and alloys including preparation of catalysts and their reactions in various industrial processes. The role of supported metals and alloys is described in asimilar manner. This isfollowed byan extensive description of the preparation and the reactions of PGM compounds with various nonmetals and their catalytically active role in a number of industrial processes (226 pages). The last chapter (21 pages) is a compilation of data on the medical use of cytostatic platinum compounds. Gelnhausen, December 1985 Kurt Swars IX Table of Contents Page Technology ofthe Platinum-Group Metals. ............................... 1 1 Review on the Recovery ofthe Platinum-Group Metals . 1.1 Historical Perspective , , , . Period of Discovery, 1750 to 1820 , , . First Industrial Period 1820 to 1900 , , , .
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Noble and Precious Metals written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2018-07-04 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of copper, silver, gold and platinum in jewelry as a measure of wealth is well known. This book contains 19 chapters written by international authors on other uses and applications of noble and precious metals (copper, silver, gold, platinum, palladium, iridium, osmium, rhodium, ruthenium, and rhenium). The topics covered include surface-enhanced Raman scattering, quantum dots, synthesis and properties of nanostructures, and its applications in the diverse fields such as high-tech engineering, nanotechnology, catalysis, and biomedical applications. The basis for these applications is their high-free electron concentrations combined with high-temperature stability and corrosion resistance and methods developed for synthesizing nanostructures. Recent developments in all these areas with up-to-date references are emphasized.
Download or read book A History of Platinum and its Allied Metals written by Donald McDonald and published by Johnson Matthey Plc. This book was released on 1982-01-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the history of platinum and its associated metals, covering important discoveries and scientific work on the platinum group metals up to the early twentieth century. With twenty-four chapters, 450 pages, over 600 references and 235 illustrations (20 in colour) including 100 portraits, “A History of Platinum and its Allied Metals” by Donald McDonald and Leslie B. Hunt is the definitive description of how science was able to progress by means of the unique properties of these metals.
Download or read book The Carcinogenicity of Metals written by Alan B. G. Lansdown and published by Royal Society of Chemistry. This book was released on 2013-10-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book re-evaluates epidemiological and occupational health studies, experimental studies in animals and in vitro experiments relating to the toxicity of 27 metal and metalloid elements for which evidence of carcinogenicity has been presented. Human carcinogenic risk is substantiated in relation to arsenic, beryllium, thorium, chromium, radioactive elements, probably lead, and some nickel and cobalt compounds, and respirable silica particles, but the carcinogenicity of iron, aluminium, titanium, tungsten, antimony, bismuth, mercury, precious metals, and certain related compounds in humans is unresolved. The toxicity and carcinogenicity of each element is specific but correlates poorly with its position in the Periodic Table. Carcinogenicity differs according to the valency of the ion and its ability to interact with and penetrate membranes in target cells and to bind, denature or induce mutations by genotoxic or epigenetic mechanisms. This important text comprehensively examines each of the elements providing detailed information on the carcinogenicity and toxicity and detailing the most up-to-date research in this area. The book is an essential tool for toxicologists, medicinal and biochemists, and environmental scientists working in both industry and academia.
Download or read book Women In Their Element Selected Women s Contributions To The Periodic System written by Annette Lykknes and published by World Scientific. This book was released on 2019-08-05 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2019 celebrated the 150th anniversary of Mendeleev's first publication of the Periodic Table of Chemical Elements. This book offers an original viewpoint on the history of the Periodic Table: a collective volume with short illustrated papers on women and their contribution to the building and the understanding of the Periodic Table and of the elements themselves. Few existing texts deal with women's contributions to the Periodic Table. A book on women's work not only helps make historical women chemists more visible; it also sheds light on the multifaceted character of the work on the chemical elements and their periodic relationships. Stories of female input contribute to the understanding of the nature of science, of collaboration as opposed to the traditional depiction of the lone genius.While the discovery of elements is a natural part of this collective work, the book goes beyond discovery histories. Stories of women contributors to the chemistry of the elements also include understanding the concept of element, identifying properties, developing analytical methods, mapping the radioactive series, finding applications of elements, and the participation of women as audiences when new elements were presented at lectures.The book contains chapters on pre-periodic table contributions as well as recent discoveries, unknown stories as well as more famous ones, with an emphasis on work conducted in the late 19th century and early 20th century. Elements from different groups in the periodic table are included, so as to represent a variety of chemical contexts.
Download or read book Gold Platinum Palladium Silver Other Jewelry Metals written by Renee Newman and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A full-colour guide for lay people and professionals about gold, platinum, palladium, silver, copper, bronze, brass, iron, titanium, niobium, aluminium, stainless steel, Damascus steel, tungsten carbide and cobalt chrome. This book explains how to test, buy, sell, and care for jewellery with precious and alternative metals. High-quality colour photographs show how these metals are creatively used in jewellery. Besides providing an historical perspective and interesting facts about the metals, this book discusses jewellery manufacturing methods, plating and responsible mining & business practices. You will learn: How to read the stamps on jewellery mountings; How to identify jewellery metals; How to determine the gold content in jewellery; How and where to sell your unwanted jewellery; How to spot a fair consignment contract; How to select refiners and prepare shipments to them; How to prevent and remove silver tarnish; How to clean metal jewellery.
Download or read book Separation Preconcentration and Spectrophotometry in Inorganic Analysis written by Z. Marczenko and published by Elsevier. This book was released on 2000-10-18 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectrophotometry enables one to determine, with good precision and sensitivity, almost all the elements present in small and trace quantities of any material. The method is particularly useful in the determination of non-metals and allows the determination elements in a large range of concentrations (from single % to low ppm levels) in various materials.In Separation, Preconcentration and Spectrophotometry in Inorganic Analysis, much attention has been paid to separation and preconcentration methods, since they play an essential role in increasing the selectivity and sensitivity of spectrophotometric methods. Separation and preconcentration methods have also been utilised in other determination techniques.Spectrophotometric methods which are widely used for the determination of the elements in a large variety of inorganic materials are presented in the book whilst separation and preconcentration procedures combined with spectrophotometry are also described. This book contains recent advances in spectrophotometry, detailed discussion of the instrumentation, and the techniques and reagents used for spectrophotometric determination of elements in a wide range of materials as well as a detailed discussion of separation and preconcentration procedures that precede the spectrophotometric detection.
Download or read book Handbook on Rare Earth Metals and Alloys Properties Extraction Preparation and Applications written by NPCS Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2009-04-01 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare earths are essential constituents of more than 100 mineral species and present in many more through substitution. They have a marked geochemical affinity for calcium, titanium, niobium, zirconium, fluoride, phosphate and carbonate ions. Industrially important minerals, which are utilized at present for rare earths production, are essentially three, namely monazite, bastnasite and xenotime. In modern time techniques for exploration of rare earths and yttrium minerals include geologic identification of environments of deposition and surface as well as airborne reconnaissance with magnetometric and radiometric equipment. There are numerous applications of rare earths such as in glass making industry, cracking catalysts, electronic and optoelectronic devices, medical technology, nuclear technology, agriculture, plastic industry etc. Lot of metals and alloys called rare earth are lying in the earth which required to be processed. Some of the important elements extracted from rare earths are uranium, lithium, beryllium, selenium, platinum metals, tantalum, silicon, molybdenum, manganese, chromium, cadmium, titanium, tungsten, zirconium etc. There are different methods involved in production of metals and non metals from rare earths for example; separation, primary crushing, secondary crushing, wet grinding, dry grinding etc. The rare earths are silver, silverymwhite, or gray metals; they have a high luster, but tarnish readily in air, have high electrical conductivity. The rare earths share many common properties this makes them difficult to separate or even distinguish from each other. There are very small differences in solubility and complex formation between the rare earths. The rare earth metals naturally occur together in minerals. Rare earths are found with non metals, usually in the 3+ oxidation state. At present all the rare earth resources in India are in the form of placer monazite deposits, which also carry other industrially important minerals like ilmenite, rutile, zircon, sillimanite and garnet. Some of the fundamentals of the book are commercially important rare earth minerals, exploration for rare earth resources, rare earth resources of the world, some rare earth minerals and their approximate compositions, rare earths in cracking catalysts, rare earth based phosphors, interdependence of applications and production of rare earths, uranium alloys, conversion of ores to lithium chemicals, characterization and analysis of very pure silicon, derivation of molybdenum metal, electoplating and chromizing, electrolytic production of titanium, heat treatment of titanium alloys, tensile properties of alloys etc. The book covers occurrence of rare earth, resources of the world, production of lithium metals, compounds derived from the metals, chemical properties of beryllium, uses of selenium, derivation of molybdenum metals, ore concentration and treatment and many more. This is a unique book of its kind, which will be a great asset for scientists, researchers, technocrats and entrepreneurs. TAGS Applications of Rare Earth Metals and Alloys, Beryllium, Best small and cottage scale industries, Boron, Business guidance for Rare earth metals and alloys processing, Business Plan for a Startup Business, Cadmium, Chromium, Extraction and Applications of Rare Earth Metals and Alloys, Extraction of Rare Earth Metals and Alloys, How to Start a Rare earth metals and alloys Business, How to Start a Rare earth metals and alloys extraction?, How to start a successful Rare earth metals and alloys extraction, How to start rare earth alloys Processing Industry in India, How to start rare earth metals Processing Industry in India, Industrial Uses of Rare Earths metals and alloys, Lithium, Magnesium Alloys with Rare-Earth Metal, Magnetic Properties of Rare‐Earth Metals and Alloys, Manganese, Molybdenum, Most Profitable Rare earth metals and alloys Processing Business Ideas, New small scale ideas in Rare earth metals and alloys processing industry, Platinum Metals, Preparation of Rare Earth Metals and Alloys, Profitable small and cottage scale industries, Profitable Small Scale Rare earth metals and alloys extraction, Project for startups, Properties of Rare Earth Metals and Alloys, Rare Earth Alloys, Rare Earth Elements - Metals, Minerals, Mining, Uses, Rare earth elements (REE): industrial technology, Rare Earth Elements Applications, Rare earth elements properties, Rare earth elements separation process, Rare Earth elements, Rare earth extraction process, Rare Earth Industry, Rare earth metals and alloy extraction process, Rare earth metals and alloys Based Profitable Projects, Rare earth metals and alloys Based Small Scale Industries Projects, Rare earth metals and alloys extraction Business, Rare earth metals and alloys Processing Industry in India, Rare earth metals and alloys Processing Projects, Rare Earth Metals and Alloys, Rare earth metals India, Rare Earth Metals Production and Alloys with Properties, Rare earth metals uses, Rare Earth Metals, Rare Earth Resources, Rare minerals list, Selenium, Setting up and opening your Rare earth metals and alloys Business, Silicon, Small Scale Rare earth metals and alloys Processing Projects, Small scale Rare earth metals and alloys production line, Small Start-up Business Project, Start up India, Stand up India, Starting a Rare earth metals and alloys Processing Business, Start-up Business Plan for Rare earth metals and alloys processing, Startup ideas, Startup Project, Startup Project for Rare earth metals and alloys processing, Startup project plan, Tantalum, Titanium, Tungsten, Uranium, Uses of rare earth metals and alloys in metallurgy, Where are rare earth metals found?, Zirconium
Download or read book Metallurgical Properties of Precious Metals and Their Alloys which Affect Their Use in Dentistry written by Reginald Victor Williams and published by . This book was released on 1928 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Platinum Metals and Their Alloys written by Raymond F. Vines and published by . This book was released on 1941 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recovery and Refining of Precious Metals written by C.W. Ammen and published by Springer. This book was released on 1997-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the product of 50+ years of hands-on physiochemical work with both ferrous and nonferrous metals and with the metallurgy of refining, extracting, and casting. Its purpose is to cover the various methods of recovery and refining of precious metals. Both primary sources (placer gold, black sand, and ores) and secondary sources (scrap jewelry, electronic scrap, old films, buffings, spent plating and stripping solutions, catalytic automobile converters, and old eyeglass frames) are covered. The information contained in this volume is very basic and is intended for hands-on application and use. It is for nonchemist and chemist alike. I will not discuss the mathematical formulas for the various chemical reactions that take place-I leave them to the reader who wants to increase his working knowledge and understanding of chemistry. There are many courses offered in chemistry and extractive metallurgy, as well as a number of books available for self-study. The purpose of this book is to teach you how to perform various extractive, refining, and testing operations on precious metals (in various forms and states), with a resulting end product. You will learn how to perform operations in assaying and extraction, qualitative analysis, quantitative analysis, testing, classifying, and concentration-some of a purely mechanical nature, some of a chemical nature.
Download or read book Papers and Discussions Presented Before the Coal Division written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1928 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Monograph written by and published by . This book was released on 1962 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalog of Books and Reports in the Bureau of Mines Technical Library Pittsburgh Pa written by United States. Bureau of Mines. Technical Library, Pittsburgh and published by . This book was released on 1968 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precious Metals for Biomedical Applications written by Niklaus Baltzer and published by Elsevier. This book was released on 2014-05-07 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precious metals and semi-precious metals are used for an increasing number of medical applications due to the properties of these metals and their alloys. Precious Metals for Biomedical Applications reviews the properties of precious metals and their resulting applications in medicine. Part one outlines the fundamentals of precious metals for biomedical applications, discussing their useful properties, such as biocompatibility and corrosion resistance. Part two goes on to provide an overview of the applications of precious metals in biomedicine, including dental, therapeutic, tissue engineering, and bioimaging applications. It discusses the advantages of the structure and properties of precious metals for these applications. Precious Metals for Biomedical Applications is a key reference for material scientists and academics concerned with the properties and uses of these metals. - Provides a useful review of this group of materials' unique properties and applications - Examines the fundamentals of precious metals for biomedical applications, before looking at a wide range of applications of precious metals in medicine