Download or read book Plastics Failure Analysis and Prevention written by John Moalli and published by William Andrew. This book was released on 2001-12-31 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains analysis of reasons that cause products to fail. General methods of product failure evaluation give powerful tools in product improvement. Such methods, discussed in the book, include practical risk analysis, failure mode and effect analysis, preliminary hazard analysis, progressive failure analysis, fault tree analysis, mean time between failures, Wohler curves, finite element analysis, cohesive zone model, crack propagation kinetics, time-temperature collectives, quantitative characterization of fatigue damage, and fracture maps. Methods of failure analysis are critical to for material improvement and they are broadly discussed in this book. Fractography of plastics is relatively a new field which has many commonalities with fractography of metals. Here various aspects of fractography of plastics and metals are compared and contrasted. Fractography application in studies of static and cycling loading of ABS is also discussed. Other methods include SEM, SAXS, FTIR, DSC, DMA, GC/MS, optical microscopy, fatigue behavior, multiaxial stress, residual stress analysis, punch resistance, creep-rupture, impact, oxidative induction time, craze testing, defect analysis, fracture toughness, activation energy of degradation.Many references are given in this book to real products and real cases of their failure. The products discussed include office equipment, automotive compressed fuel gas system, pipes, polymer blends, blow molded parts, layered, cross-ply and continuous fiber composites, printed circuits, electronic packages, hip implants, blown and multilayered films, construction materials, component housings, brake cups, composite pressure vessels, swamp coolers, electrical cables, plumbing fittings, medical devices, medical packaging, strapping tapes, balloons, marine coatings, thermal switches, pressure relief membranes, pharmaceutical products, window profiles, and bone cements.
Download or read book Plastics Failure written by Myer Ezrin and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2013-08-01 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics failure, to a certain extent, is the result of a phenomenal increase in the number and variety of applications in relatively few years. The focus of this book is on actual field and product failures. The treatment is comprehensive, emphasizing cause and prevention. The concept of the interdependence of material, design, and processing is applied to all examples and cases. The "how to" of prevention is brought out as a logical extension of the cause of failure. Contents: Nature, Causes, and Consequences of Plastics Failure. Fundamental Materials Variables Affecting Processing and Product Performance or Failure. Failures Related to Design and Material Selection. Examples. Processing-Related Factors to Failure. Failure Related to Service Conditions. Failure Analysis and Test Procedures. Quality Control. Legal Aspects of Plastic Product Liability and Failure. Examples of Failures in Various Applications
Download or read book ASM HANDBOOK written by TODD. MENNA and published by . This book was released on 2022 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Failure Analysis of Plastics written by ASM International and published by ASM International. This book was released on 2003-01-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.
Download or read book Handbook of Plastics Testing and Failure Analysis written by Vishu Shah and published by John Wiley & Sons. This book was released on 2020-12-22 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in easy-to-read and -use format, this book provides a strong training resource and reference for product designers using plastics in their products – helping them identify, quantify, and confirm whether problems are related to product design or process. • Updates coverage of data analysis techniques and examples and expands coverage of failure analysis, key because of increased litigation related to product liability • Overviews plastic testing methods and the framework to investigate causes of plastic part failure • Provides a strong training resource and reference for product designers using plastics in their products • Features a video tour of a plastics testing labroatory on a companion website and has a separate manual of problems and solutions that are appropriate for college professors using the book as a class textbook
Download or read book Handbook of Plastics Failure Analysis written by Friedrich Kurr and published by Hanser Pub Incorporated. This book was released on 2015-01-15 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: With 588 full-color images and associated analyses for identification and avoidance of damage to plastics, this manual is aimed at both professionals and students. Technical terms and colloquial descriptions are explained and interconnected with the images and each other, assisting the reader in determining and describing the exact type of damage of a given sample. The images--from microscopic quality and damage analysis of molding materials, semi-finished products, and molded parts-- are divided into 74 subject areas of plastics processing and application and classified based on an alphabetical glossary of over 2,620 industry-standard technical terms. The analyses were performed with various light microscopes and a scanning electron microscope. This comprehensive book offers expert advice based on Kurr's 35+ years of experience in both teaching and research and development.
Download or read book Plastics Failure Guide written by Myer Ezrin and published by Hanser Pub Incorporated. This book was released on 2013 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics failure, to a certain extent, is the result of a phenomenal increase in the number and variety of applications in relatively few years. The focus of this book is on actual field and product failures. The treatment is comprehensive, emphasizing cause and prevention. The concept of the interdependence of material, design, and processing is applied to all examples and cases. The "how to" of prevention is brought out as a logical extension of the cause of failure.
Download or read book Failure of Plastics and Rubber Products written by D. Wright and published by iSmithers Rapra Publishing. This book was released on 2001-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics and rubbers together make up the most adaptable and varied class of materials available to product designers. They may be transparent or opaque, rigid or flexible, lightweight, insulating, and weatherproof. They are used in almost every industry, and in every part of the home. Applications range from the humble hot water bottle to the sheathing on a high voltage cable, and from a simple scrubbing brush to a tank for storing hydrochloric acid. Products may be disposable (e.g. packaging goods) or intended to last for decades, such as a buried sewage pipe. However, it is this very diversity which makes materials selection so difficult, and appropriate design so important. Indeed the one thing that all these particular products have in common is their presence in this book of failures. Failures due to degradation may result from exposure to the weather or an aggressive operating environment. Alternatively they may be caused by the introduction of an external agent unforeseen by the product designer. They may be rapid or very slow, and they may result from a combination of factors. In this book Dr. Wright describes the following mechanisms of polymer degradation, and then illustrates each failure mechanism with a number of case studies: Thermo-oxidation, Photo-oxidation, Degradation due to ionising radiation, Chemical attack, Environmental stress cracking, Other miscellaneous effects, including treeing, electrochemical degradation and biodegradation. Many of the case studies are based on Dr. Wrights own experiences whilst working at Rapra. In each case he describes the circumstances of the failure, and discusses both the consequences of the failure and the lessons that may be learned from it. Most of the failed products are familiar to us all, and his style is both readable and informative. Photographs are included where available. The book will be essential reading for designers, engineers, product specifiers and forensic engineers. Materials suppliers and processors will also benefit from the pragmatic analysis and advice it contains. It will also be of value to all students of polymer science and technology, providing an essential insight into the practical application of plastics and rubbers and the potential problems. Finally, it will be of interest to a much broader readership, including anyone who ever wondered why things break, and it should become a standard reference work in all technical libraries. This book was written with the support of the UK Department of Trade and Industry. It is intended to raise awareness of the causes and consequences of polymer product failures, in order to reduce the future incidences of such failures, and their considerable costs to industry
Download or read book Failure Analysis and Prevention written by Aidy Ali and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancement methods used in analysing the root cause of engineering failures and the proactive suggestion for future failure prevention. The techniques used especially non-destructive testing such X-ray are well described. The failure analysis covers materials for metal and composites for various applications in mechanical, civil and electrical applications. The modes of failures that are well explained include fracture, fatigue, corrosion and high-temperature failure mechanisms. The administrative part of failures is also presented in the chapter of failure rate analysis. The book will bring you on a tour on how to apply mechanical, electrical and civil engineering fundamental concepts and to understand the prediction of root cause of failures. The topics explained comprehensively the reliable test that one should perform in order to investigate the cause of machines, component or material failures at the macroscopic and microscopic level. I hope the material is not too theoretical and you find the case study, the analysis will assist you in tackling your own failure investigation case.
Download or read book Handbook of Plastics Failure Analysis written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Handbook written by Todd J. Menna and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Medical Plastics written by Robert C Portnoy and published by William Andrew. This book was released on 1998-12-31 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastics is widespread. Less widespread, however, is a clear understanding and examination of the many forms of degradation inherent within the very environments these materials must perform. Medical PlasticsùDegradation Resistance & Failure Analysis fills that void. The introductory chapter gives an overview of the medical applications of plastics and the specific performance requirements they need to meet. The following chapters discuss various degrading environments and their effects including environmental stress cracking, effect of body liquids, effect of harsh environments, and various methods of sterilization. The book also discusses the failure of medical devices due to contamination, low temperature, the effects of UV light, migration of formulation components, mechanical stresses, and problems with design and fabrication. Case histories of failures of some common products used in medicine are also provided.
Download or read book Failure Analysis for Plastics Products written by Rainer Dahlmann and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-09-23 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage to plastic products requires immediate action in often complex situations. Failure and damage analysis is then an important tool for avoiding further economic losses and in the next steps for quality assurance and product safety. In order to solve problems and develop remedial measures, basic knowledge of plastics analysis, materials and typical damage mechanisms as well as systematic approach are necessary. The book supports the reader in all these points by providing a basic insight into the systematic approach and serving as a guide for practical implementation. In particular, manufacturing and material-related aspects are also taken into account, so that a comprehensive and universal method for determining the causes of damage to plastic products is presented. Examples in the form of briefly summarized cases of damage from practical experience as a damage analyst round off the descriptions of the procedure.
Download or read book How to Organize and Run a Failure Investigation written by Daniel P. Dennies and published by ASM International. This book was released on 2005 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning the proper steps for organizing a failure investigation ensures success. Failure investigations cross company functional boundaries and are an integral component of any design or manufacturing business operation. Well-organized and professionally conducted investigations are essential for solving manufacturing problems and assisting in redesigns. This book outlines a proven systematic approach to failure investigation. It explains the relationship between various failure sources (corrosion, for example) and the organization and conduct of the investigation. It provides a learning platform for engineers from all disciplines: materials, design, manufacturing, quality, and management. The examples in this book focus on the definition of and requirements for a professionally performed failure analysis of a physical object or structure. However, many of the concepts have much greater utility than for investigating the failure of physical objects. For example, the book provides guidance in areas such as learning how to define objectives, negotiating the scope of investigation, examining the physical evidence, and applying general problem-solving techniques.
Download or read book Handbook of Plastics Testing and Failure Analysis written by Vishu Shah and published by John Wiley & Sons. This book was released on 2007-02-26 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in easy-to-read and -use format, this book updates and revises its bestselling predecessor to become the most complete, comprehensive resource on plastics testing. This book has an emphasis on significance of test methods and interpretation of results. The book covers all aspects of plastics testing, failure analysis, and quality assurance - including chapters on identification analysis, failure analysis, and case studies. The book concludes with a substantial appendix with useful data, charts and tables for ready reference. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Download or read book Medical Plastics written by and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Failure Analysis written by Kary Thanapalan and published by BoD – Books on Demand. This book was released on 2020-05-06 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter contents include information on: Stress analysis – strengths and limitations of traditional theoretical approaches to FRP laminate design against failure; stress corrosion cracking behavior of materials; failure analysis and durability issues.
