Download or read book Plasticity of Pressure Sensitive Materials written by Holm Altenbach and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical plasticity theory of metals is independent of the hydrostatic pressure. However if the metal contains voids or pores or if the structure is composed of cells, this classical assumption is no more valid and the influence of the hydrostatic pressure must be incorporated in the constitutive description. Looking at the microlevel, metal plasticity is connected with the uniform planes of atoms organized with long-range order. Planes may slip past each other along their close-packed directions. The result is a permanent change of shape within the crystal and plastic deformation. The presence of dislocations increases the likelihood of planes slipping. Nowadays, the theory of pressure sensitive plasticity is successfully applied to many other important classes of materials (polymers, concrete, bones etc.) even if the phenomena on the micro-level are different to classical plasticity of metals. The theoretical background of this phenomenological approach based on observations on the macro-level is described in detail in this monograph and applied to a wide range of different important materials in the last part of this book.
Download or read book Issues in Materials and Manufacturing Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 11119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Materials and Manufacturing Research. The editors have built Issues in Materials and Manufacturing Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Materials and Manufacturing Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book State of the Art and Future Trends in Material Modeling written by Holm Altenbach and published by Springer Nature. This book was released on 2019-10-23 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special anniversary book celebrates the success of this Springer book series highlighting materials modeling as the key to developing new engineering products and applications. In this 100th volume of “Advanced Structured Materials”, international experts showcase the current state of the art and future trends in materials modeling, which is essential in order to fulfill the demanding requirements of next-generation engineering tasks.
Download or read book Mechanics of Anisotropic Materials written by Jacek J. Skrzypek and published by Springer. This book was released on 2015-05-09 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on constitutive description of mechanical behaviour of engineering materials: both conventional (polycrystalline homogeneous isotropic or anisotropic metallic materials) and non-conventional (heterogeneous multicomponent anisotropic composite materials). Effective material properties at the macro-level depend on both the material microstructure (originally isotropic or anisotropic) as well as dissipative phenomena occurred on fabrication and consecutive loading phase (hardening) resulting in irreversible microstructure changes (acquired anisotropy). The material symmetry is a background and anisotropy is a core around which the book is formed. In this way a revision of classical rules of enhanced constitutive description of materials is required.
Download or read book Failure and Damage Analysis of Advanced Materials written by Holm Altenbach and published by Springer. This book was released on 2014-12-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present basic concepts and new developments in failure and damage analysis with focus on advanced materials such as composites, laminates, sandwiches and foams, and also new metallic materials. Starting from some mathematical foundations (limit surfaces, symmetry considerations, invariants) new experimental results and their analysis are shown. Finally, new concepts for failure prediction and analysis will be introduced and discussed as well as new methods of failure and damage prediction for advanced metallic and non-metallic materials. Based on experimental results the traditional methods will be revised.
Download or read book Elements of Plasticity written by I. St Doltsinis and published by WIT Press. This book was released on 2010 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the essential theoretical framework for understanding elastoplastic behaviour, this text develops the subject of small strain elastoplasticity from classical theory to modern computational techniques.
Download or read book Advanced Methods of Continuum Mechanics for Materials and Structures written by Konstantin Naumenko and published by Springer. This book was released on 2016-05-12 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of contributions on advanced approaches of continuum mechanics, which were written to celebrate the 60th birthday of Prof. Holm Altenbach. The contributions are on topics related to the theoretical foundations for the analysis of rods, shells and three-dimensional solids, formulation of constitutive models for advanced materials, as well as development of new approaches to the modeling of damage and fractures.
Download or read book Anisotropy and Localization of Plastic Deformation written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present developments in materials science, mechanics and engineering, as well as the demands of modern technology, result in a new and growing interest in plasticity and in bordering domains of the mechanical behavior of materials. This growing interest is attested to by the success of both The International Journal of Plasticity, which after its inception rapidly became the leading journal for plasticity research, and the series ofInternational Symposia on Plasticity and Its Current Applications, which is now the premier international forum for plasticity research dissemination. The First International Symposium on Plasticity and Its Current Applications was conceived and organized by Professor Akhtar S. Khan, and was held at the University of Oklahoma (Norman, Oklahoma, USA) from July 30 to August 3, 1984. It was attended by over one hundred scientists from fifteen countries. "Plasticity '89: the Second International Symposium on Plasticity and Its Current Applications" was held at Mie University (Tsu, Japan) from July 31 to August 4, 1989; this symposium was co-chaired by Professors Khan and Tokuda. The main emphasis of this meeting was on dynamic plasticity and micromechanics, although it included other aspects of plasticity as well. It was attended by over two hundred researchers from twenty-three nations.
Download or read book Equivalent Stress Concept for Limit State Analysis written by Vladimir A. Kolupaev and published by Springer. This book was released on 2018-01-18 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses arbitrary multiaxial stress states using the concept of equivalent stress. It highlights the most useful criteria, which can be applied to various classes of isotropic materials. Due to its simplicity and clarity, this concept is now widely used in component design, and many strength and yield criteria based on the equivalent stress concept have been formulated. Choosing the appropriate criterion for a given material remains the main challenge in applications. The most useful criteria can be applied best when the plausibility assumptions are known. Accordingly, the book introduces fitting methods based on mathematical, physical, and geometrical objective functions. It also features a wealth of examples that demonstrate the application of different approaches in modeling certain limit behaviors.
Download or read book Numerical Assessments of Cracks in Elastic Plastic Materials written by Huang Yuan and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book a systematic discussion of crack problems in elastic-plastic materials is presented. The state of the art in fracture mechanics research and assessment of cracks is documented, with the help of analytic, asymptotic methods as well as finite element computations. After a brief introduction to fracture mechanics, the two-parameter concept for stationary cracks is studied in addition to the issues in three-dimensional crack fields under coupling with strong out-of-plane effects. Cracks along interfaces and crack growth problems under mixed mode conditions are also treated. A systematic study of stress singularities for different notches is accompanied by detailed finite element computations.
Download or read book Elastoplasticity Theory written by Vlado A. Lubarda and published by CRC Press. This book was released on 2001-07-16 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the elastoplastic deformation of metals and geomaterials, including the constitutive description of the materials and analysis of structure undergoing plastic deformation, is an essential part of the background required by mechanical, civil, and geotechnical engineers as well as materials scientists. However, most books address the su
Download or read book Gradient Enhanced Continuum Plasticity written by George Z. Voyiadjis and published by Elsevier. This book was released on 2020-03-27 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gradient-Enhanced Continuum Plasticity provides an expansive review of gradient-enhanced continuum plasticity from the initial stage to current research trends in experimental, theoretical, computational and numerical investigations. Starting with an overview of continuum mechanics and classical plasticity, the book then delves into concise lessons covering basic principles and applications, such as outlining the use of the finite element method to solve problems with size effects, mesh sensitivity and high velocity impact loading. All major theories are explored, providing readers with a guide to understanding the various concepts of and differences between an array of gradient-enhanced continuum plasticity models. Outlines the concepts of, and differences between, various gradient-enhanced continuum plasticity models Provides guidance on problem-solving for size effects, mesh-sensitivity tests and thermo-mechanical coupling Reviews experimental, numerical and theoretical issues in gradient-enhanced continuum plasticity Describes micromechanical aspects from experimental observations
Download or read book Dynamic Plasticity written by N. Cristescu and published by World Scientific. This book was released on 2007 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a self-contained and comprehensive look at the field of dynamic plasticity for researchers and graduates in mechanical engineering. Drawing on the author''s long career in the field, the book greatly extends material from the 1967 original edition with the addition of fresh research chapters as well as a full introduction to the elementary theory of plasticity. The coverage of new areas includes a chapter on rocks and soils, the various developments in research on rate type, and novel problems concerning non-homogenous Bingham fluids, such as flow along an inclined slope. Other chapters consider the latest issues in metal working, such as drawing, floating plug, and extrusion. New problems concerning the perforation of plates with high velocity are also included.
Download or read book Advanced Computational Materials Modeling written by Miguel Vaz Junior and published by John Wiley & Sons. This book was released on 2011-09-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its discussion of strategies for modeling complex materials using new numerical techniques, mainly those based on the finite element method, this monograph covers a range of topics including computational plasticity, multi-scale formulations, optimization and parameter identification, damage mechanics and nonlinear finite elements.
Download or read book Plasticity written by S. Nemat-Nasser and published by Cambridge University Press. This book was released on 2004-11-29 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Plasticity written by Ronaldo I. Borja and published by Springer Science & Business Media. This book was released on 2013-06-14 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been many excellent books written on the subject of plastic deformation in solids, but rarely can one find a textbook on this subject. “Plasticity Modeling & Computation” is a textbook written specifically for students who want to learn the theoretical, mathematical, and computational aspects of inelastic deformation in solids. It adopts a simple narrative style that is not mathematically overbearing, and has been written to emulate a professor giving a lecture on this subject inside a classroom. Each section is written to provide a balance between the relevant equations and the explanations behind them. Where relevant, sections end with one or more exercises designed to reinforce the understanding of the “lecture.” Color figures enhance the presentation and make the book very pleasant to read. For professors planning to use this textbook for their classes, the contents are sufficient for Parts A and B that can be taught in sequence over a period of two semesters or quarters.
Download or read book Material Modeling and Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2022-05-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various questions of continuum mechanical modeling in the context of experimental and numerical methods, in particular, multi-field problems that go beyond the standard models of continuum mechanics. In addition, it discusses dynamic problems and practical solutions in the field of numerical methods. It focuses on continuum mechanics, which is often overlooked in the traditional division of mechanics into statics, strength of materials and kinetics. The book is dedicated to Prof. Volker Ulbricht, who passed away on April 9, 2021.
