Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Plasma at the Nanoscale written by Huaihe Song and published by Elsevier. This book was released on 2022-08-12 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma technology can facilitate the fabrication of nanomaterials and nanoscale structures. On the other hand, nanotechnology could be possibly used in plasma science. Several advanced nanomaterials and nanodevices could be used to fabricate nanoplasma (nanoscale plasma), such as nanoelectrodes, nanoantennae, nanolasers, nanoreactors, nanomagnets, nanosensors, nanobatteries, nanogenerator and supercapacitors. This book provides information on fundamental design concepts and promising applications of nanoplasma. It explains how, for the next generation of electronic devices with high data rate communications, a high-speed operation of electronic switches could be attained using nanoplasma. Similarly, in the field of heath and aesthetics, nanoplasma can be used as a non-surgical localized treatments for the face and neck, such as eyelid correction. In addition, various kinds of advanced nanostructures can be fabricated using the plasma technology - Outlines the main properties of nanotechnology-enhanced plasma - Discusses major applications of plasma technology - Assesses the major challenges of manufacturing nanoplasma on an industrial scale

Download or read book Plasma Processing of Nanomaterials written by R. Mohan Sankaran and published by CRC Press. This book was released on 2017-12-19 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are at a critical evolutionary juncture in the research and development of low-temperature plasmas, which have become essential to synthesizing and processing vital nanoscale materials. More and more industries are increasingly dependent on plasma technology to develop integrated small-scale devices, but physical limits to growth, and other challenges, threaten progress. Plasma Processing of Nanomaterials is an in-depth guide to the art and science of plasma-based chemical processes used to synthesize, process, and modify various classes of nanoscale materials such as nanoparticles, carbon nanotubes, and semiconductor nanowires. Plasma technology enables a wide range of academic and industrial applications in fields including electronics, textiles, automotives, aerospace, and biomedical. A prime example is the semiconductor industry, in which engineers revolutionized microelectronics by using plasmas to deposit and etch thin films and fabricate integrated circuits. An overview of progress and future potential in plasma processing, this reference illustrates key experimental and theoretical aspects by presenting practical examples of: Nanoscale etching/deposition of thin films Catalytic growth of carbon nanotubes and semiconductor nanowires Silicon nanoparticle synthesis Functionalization of carbon nanotubes Self-organized nanostructures Significant advances are expected in nanoelectronics, photovoltaics, and other emerging fields as plasma technology is further optimized to improve the implementation of nanomaterials with well-defined size, shape, and composition. Moving away from the usual focus on wet techniques embraced in chemistry and physics, the author sheds light on pivotal breakthroughs being made by the smaller plasma community. Written for a diverse audience working in fields ranging from nanoelectronics and energy sensors to catalysis and nanomedicine, this resource will help readers improve development and application of nanomaterials in their own work. About the Author: R. Mohan Sankaran received the American Vacuum Society’s 2011 Peter Mark Memorial Award for his outstanding contributions to tandem plasma synthesis.

Download or read book Plasma Nanoscience written by Kostya Ostrikov and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the need for a single work specifically addressing how to use plasma for the fabrication of nanoscale structures, this book is the first to cover plasma deposition in sufficient depth. The author has worked with numerous R&D institutions around the world, and here he begins with an introductory overview of plasma processing at micro- and nanoscales, as well as the current problems and challenges, before going on to address surface preparation, generation and diagnostics, transport and the manipulation of nano units.

Download or read book Plasma Catalysis written by Xin Tu and published by Springer Nature. This book was released on 2019-11-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the field of plasma catalysis, regarded as a promising alternative to thermal processes for energy and environmental applications. It bridges the gap between the plasma and catalysis research communities, covering both the fundamentals of plasma catalysis and its application in environmental and energy research. The first section of the book offers a broad introduction to plasma catalysis, covering plasma-catalyst systems, interactions, and modeling. The core of the book then focuses on different applications, describing a wide range of plasma-catalytic processes in catalyst synthesis, environmental clean-up, greenhouse gas conversion and synthesis of materials for energy applications. Chapters cover topics ranging from removal of NOx and VOCs to conversion of methane, carbon dioxide and the reforming of ethanol and methanol. Written by a group of world-leading researchers active in the field, the book forms a valuable resource for scientists, engineers and students with different research backgrounds including plasma physics, plasma chemistry, catalysis, energy, environmental engineering, electrical engineering and material engineering.

Download or read book Functionalized Nanoscale Materials Devices and Systems written by Ashok K. Vaseashta and published by Springer Science & Business Media. This book was released on 2008-10-23 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the NATO Advanced Study Institute (ASI) titled “Functionalized Nanoscale Materials, Devices, and Systems for Chem. -Bio Sensors, Photonics, and Energy Generation and Storage” was to present a contemporary and comprehensive overview of the field of nanostructured materials and devices and its applications in chem. -bio sensors, nanophotonics, and energy generation and storage devices. The study has become one of the most promising disciplines in science and technology, as it aims at the fundamental understanding of new physical, che- cal, and biological properties of systems and the technological advances arising from their exploration. Such systems are intermediate in size, between the isolated atoms and molecules and bulk material, where the unique transitional characteristics between the two can be understood, controlled, and manipulated. Nanotechnologies refer to the creation and utilization of functional materials, devices, and systems with novel properties and functions that are achieved through the control of matter, atom-by-atom, molecule-by-molecule, or at a micro-mo- cular level. Advances made over the last few years provide new opportunities for scientific and technological developments in nanostructures and nanosystems with new architectures with improved functionality. The field is very actively and rapidly evolving and covers a wide range of disciplines. Recently, various nanoscale materials, devices, and systems with remarkable properties have been developed, with numerous unique applications in chemical and biological sensors, nanophotonics, nano-biotechnology, and in-vivo analysis of cellular processes at the nanoscale.

Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 2883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Issues in Applied Physics 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 6150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Applied Physics / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Applied Physics. The editors have built Issues in Applied Physics: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Applied Physics in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Applied Physics: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Micro and Nanoscale Laser Processing of Hard Brittle Materials written by Jiwang Yan and published by Elsevier. This book was released on 2019-11-12 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and Nanoscale Laser Processing of Hard Brittle Materials examines general laser-material interactions within this type of material, focusing on the nanoprocessing technologies that these phenomena have given rise to. Sections cover laser machining, healing, recovery, sintering, surface modification, texturing and microstructuring. These technologies all benefit from the characteristics of laser processing, its highly localized heating ability, and its well-defined optical properties. The book also describes frontier applications of the developed technologies, thus further emphasizing the possibility of processing hard brittle materials into complex structures with functional surfaces at both the micro and nanoscale. Provides readers with a solid understanding of laser-material interactions Helps readers choose suitable laser parameters for processing hard brittle materials Demonstrates how micro and nanoscale laser processing can be used to machine brittle materials without fracture

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Biomaterials and Engineering for Implantology written by Yoshiki Oshida and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-02-07 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials are composed of metallic materials, ceramics, polymers, composites and hybrid materials. Biomaterials used in human beings require safety regulations, toxicity, allergic reaction, etc. When used as implantable materials their biological compatibility, biomechanical compatibility, and morphological compatibility must be acessed. This book explores the design and requirements of biomaterials for the use in implantology.

Download or read book Silanes and Other Coupling Agents written by K. L. Mittal and published by BRILL. This book was released on 2009-03-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Fourth International Symposium on Silanes and Other Coupling Agents.This volume and its predecessors containing bountiful information should serve as a reference source for the latest R&D activity in the arena of coupling agents. Anyone interested or involved in promoting adhesion between dissimilar materials for any application should find this volume of great use and value.

Download or read book Polymer Surface Modification written by K. L. Mittal and published by BRILL. This book was released on 2009-02-28 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also there is acute interest and need to devise new, improved and economical means to modify polymer surfaces. This book is divided into three parts as follows: Part 1: Surface Modification Techniques; Part 2: Interfacial Aspects and Adhesion; Part 3: General Papers. The topics covered include: various techniques for surface modification including plasma (both vacuum and atmospheric pressure), ozone, photografting, UV photo-oxidation, laser, use of charged particles and others for a variety of polymers; longevity of surface treatment; hydrophobic recovery; fabrication of high-density polymer nano-dots; immobilization of organometallic catalysts on textile carrier materials; polymer membrane antifouling properties; electroless metallization of polymers; effects of surface modification on interfacial shear strength of composites, cord/rubber adhesion, adhesion of UV-curable coatings and attachment of hyperbranched polymers; plasma polymerization; block copolymers; application of plasma technology in decontamination of heat-sensitive polymer surfaces. In essence this book reflects the current state-of-the-knowledge in the arena and represents the work of many renowned scientists and technologists. It should be of interest to anyone with a desire or need to learn the latest R&D activity in this domain and the information contained here should be very valuable in deciding the optimum surface modification technique for his/her particular requirements.

Download or read book Programme and The Book of Abstracts Seventh Annual Conference YUCOMAT 2005 written by Dragan P. Uskoković and published by Institute of Technical Sciences of SASA. This book was released on 2005-08-01 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Conference on materials science and engineering, including physics, physical chemistry, condensed matter chemistry, and technology in general, was held in September 1995, in Herceg Novi. An initiative to establish Yugoslav Materials Research Society was born at the conference and, similar to other MR societies in the world, the programme was made and objectives determined. The Yugoslav Materials Research Society (Yu-MRS), a nongovernment and non-profit scientific association, was founded in 1997 to promote multidisciplinary goal-oriented research in materials science and engineering. The main task and objective of the Society has been to encourage creativity in materials research and engineering to reach a harmonic coordination between achievements in this field in our country and analogous activities in the world with an aim to include our country into global international projects. Until 2003, Conferences were held every second year and then they grew into Annual Conferences that were traditionally held in Herceg Novi in September of every year. In 2007 Yu-MRS formed two new MRS: MRS-Serbia (official successor of Yu-MRS) and MRS-Montenegro (in founding). In 2008, MRS - Serbia became a member of FEMS (Federation of European Materials Societies).

Download or read book Plasma Processes and Polymers written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume compiles essential contributions to the most innovative fields of Plasma Processes and Polymers. High-quality contributions cover the fields of plasma deposition, plasma treatment of polymers and other organic compounds, plasma processes under partial vacuum and at atmospheric pressure, biomedical, textile, automotive, and optical applications as well as surface treatment of bulk materials, clusters, particles and powders. This unique collection of refereed papers is based on the best contributions presented at the 16th International Symposium on Plasma Chemistry in Taormina, Italy (ISPC-16, June 2003). A high class reference of relevance to a large audience in plasma community as well as in the area of its industrial applications.

Download or read book Biomaterials Science Processing Properties and Applications written by Roger Narayan and published by John Wiley & Sons. This book was released on 2011-10-05 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 18 papers from the Next Generation Biomaterials and Surface Properties of Biomaterials symposia held during the 2010 Materials Science and Technology (MS&T'10) meeting, October 17-21, 2010, Houston, Texas. Topics include: Biocompatible Coatings; Drug Delivery and Anti-Microbial Coatings; Ceramic and Metallic Biomaterials; Biomaterials for Tissue Engineering; and Surface Modification.

Download or read book Innovations in Thermochemical Technologies for Biofuel Processing written by Sonil Nanda and published by Elsevier. This book was released on 2022-03-15 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Thermochemical Technologies for Biofuel Processing broadly covers current technologies in alternate fuels and chemical production, a few of which include biomass-to-liquid, biomass-to-gas and gas-to-liquid biomass conversion technologies. The topics in this book include elaborative discussions on biomass feedstocks, biomass-to-liquid technologies (liquefaction, pyrolysis and transesterification), biomass-to-gas technologies (gasification), gas-to-liquid technologies (syngas fermentation and Fischer-Tropsch synthesis), co-processing technologies, fuel upgrading technologies (hydrotreating and reforming), novel catalyst development for biorefining, biorefining process optimization, unit operations, reaction kinetics, artificial neural network, and much more. The book comprehensively discusses the strengths, weaknesses, opportunities and threats of notable biofuels (e.g., bio-oil, biocrude oil, biodiesel, bioethanol, biobutanol, bio-jet fuels, biohydrogen, biomethane, synthesis gas, hydrocarbon fuels, etc.). - Addresses solutions for clean fuel, energy security, waste management, waste valorization, reduced greenhouse gas emissions, carbon capture and sequestration, circular economy and climate change mitigation - Includes applications of thermochemical conversion and reforming technologies for waste biomass to biofuels - Covers current technologies in alternate fuels and chemicals production, a few of which include conversion technologies (i.e., liquefaction, gasification, pyrolysis, torrefaction, transesterification, organic transformation, carbon-carbon and carbon-heteroatom coupling reactions, oxidation, and reforming processes, etc.), hydrotreating technologies (i.e., hydrogenation, hydrodesulfurization, hydrodenitrogenation, hydrodearomatization and hydrodemetalization) and catalytic processes.