Download or read book Plasma Science and Technology for Emerging Economies written by Rajdeep Singh Rawat and published by Springer. This book was released on 2017-10-07 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights plasma science and technology-related research and development work at institutes and universities networked through Asian African Association for Plasma Training (AAAPT) which was established in 1988. The AAAPT, with 52 member institutes in 24 countries, promotes the initiation and intensification of plasma research and development through cooperation and technology sharing. With 13 chapters on fusion-relevant, laboratory and industrial plasmas for wide range of applications and basic research and a chapter on AAAPT network, it demonstrates how, with collaborations, high-quality, industrially relevant academic and scientific research on fusion, industrial and laboratory plasmas and plasma diagnostics can be successfully pursued in small research labs. These plasma sciences and technologies include pioneering breakthroughs and applications in (i) fusion relevant research in the quest for long-term, clean energy source development using high-temperature, high- density plasmas and (ii) multibillion-dollar, low-temperature, non-equilibrium and thermal industrial plasmas used in processing, synthesis and electronics.
Download or read book Scope and Challenge in Plasma Science Technology written by and published by Allied Publishers. This book was released on 2005 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 19th National Symposium on Plasma Science and Technology, held at Jhansi during 7-10 December 2004.
Download or read book Plasma Science and Technology written by Herman Boenig and published by Cornell University Press. This book was released on 2019-06-30 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a systematic and comprehensive manner, this book describes the science of low-temperature plasma—a new field that is emerging at a fast pace. An expert well known in this field gives a coherent overview of the applications of low-temperature plasmas to chemical reactions, and in greater detail, to polymers formed or treated in plasma. After laying the groundwork with chapters on the nature of plasma and the variety of typical reactions that occur in discharges, the author deals with specific applications in the production of polymers. He then devotes a chapter each to the deposition of films, the nature of polymers produced in plasmas, and the specific properties of polymers, with a concluding chapter on additional applications of plasma technology. Herman Boenig emphasizes thin-film depositions—their high quality and integrity, as well as their applications in a variety of industrially important uses, including microcircuitry, integrated optics, and metal and other material coatings. He also discusses extensively the applications of plasma deposition in other areas such as high adhesion to metals, polymers, and glasses; high temperature resistance; special friction characteristics; and use in reverse osmosis, permselectivity, and other membrane applications. In a special chapter he covers the use of plasma in ion implantations, plasma cleaning of materials surfaces, and the technique now being considered for use in devices to clean polluted air and convert waste products in submarines and space capsules. Plasma Science and Technology should prove invaluable as a text for graduate students and advanced undergraduates, and as a reference for chemists, material scientists, metallurgists, environmental scientists, engineers, and physicists. It will be of particular interest to those involved in microcircuitry, microcomputers, integrated optics, optical equipment, desalination, biomedicine, thin films, adhesion, ion implantation, textile treatment, advanced composites, and chemical synthesis.
Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.
Download or read book Plasma Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of materials is a critical technology to several of the largest manufacturing industries in the worldâ€"electronics, aerospace, automotive, steel, biomedical, and toxic waste management. This book describes the relationship between plasma processes and the many industrial applications, examines in detail plasma processing in the electronics industry, highlights the scientific foundation underlying this technology, and discusses education issues in this multidisciplinary field. The committee recommends a coordinated, focused, and well-funded research program in this area that involves the university, federal laboratory, and industrial sectors of the community. It also points out that because plasma processing is an integral part of the infrastructure of so many American industries, it is important for both the economy and the national security that America maintain a strong leadership role in this technology.
Download or read book Low Temperature Plasma Technology written by Paul K. Chu and published by CRC Press. This book was released on 2013-07-15 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of pioneering scientists from around the world, Low Temperature Plasma Technology: Methods and Applications brings together recent technological advances and research in the rapidly growing field of low temperature plasmas. The book provides a comprehensive overview of related phenomena such as plasma bullets, plasma penetration into biofilms, discharge-mode transition of atmospheric pressure plasmas, and self-organization of microdischarges. It describes relevant technology and diagnostics, including nanosecond pulsed discharge, cavity ringdown spectroscopy, and laser-induced fluorescence measurement, and explores the increasing research on atmospheric pressure nonequilibrium plasma jets. The authors also discuss how low temperature plasmas are used in the synthesis of nanomaterials, environmental applications, the treatment of biomaterials, and plasma medicine. This book provides a balanced and thorough treatment of the core principles, novel technology and diagnostics, and state-of-the-art applications of low temperature plasmas. It is accessible to scientists and graduate students in low-pressure plasma physics, nanotechnology, plasma medicine, and materials science. The book is also suitable as an advanced reference for senior undergraduate students.
Download or read book Plasma and Fusion Science written by B. Raneesh and published by CRC Press. This book was released on 2018-01-03 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new book, an interdisciplinary and international team of experts provides an exploration of the emerging plasma science that is poised to make the plasma technology a reality in the manufacturing sector. The research presented here will stimulate new ideas, methods, and applications in the field of plasma science and nanotechnology. Plasma technology applications are being developed that could impact the global market for power, electronics, mineral, and other fuel commodities. Currently, plasma science is described as a revolutionary discipline in terms of its possible impact on industrial applications. It offers potential solutions to many problems using emerging techniques. In this book the authors provide a broad overview of recent trends in field plasma science and nanotechnology. Divided into several parts, Plasma and Fusion Science: From Fundamental Research to Technological Applications explores some basic plasma applications and research, space and atmospheric plasma, nuclear fusion, and laser plasma and industrial applications of plasma. A wide variety of cutting-edge topics are covered, including: • basic plasma physics • computer modeling for plasma • exotic plasma (including dusty plasma) • industrial plasma applications • laser plasma • nuclear fusion technology • plasma diagnostics • plasma processing • pulsed power • space astrophysical plasma • plasma and nanotechnology Pointing to current and possible future developments in plasma science and technology, the diverse research presented here will be valuable for researchers, scientists, industry professionals, and others involved in the revolutionary field of plasma and fusion science.
Download or read book Plasma Science written by National Research Council and published by National Academies Press. This book was released on 1995-02-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma science is the study of ionized states of matter. This book discusses the field's potential contributions to society and recommends actions that would optimize those contributions. It includes an assessment of the field's scientific and technological status as well as a discussion of broad themes such as fundamental plasma experiments, theoretical and computational plasma research, and plasma science education.
Download or read book The Physics of Laser Plasmas and Applications Volume 1 written by Hideaki Takabe and published by Springer Nature. This book was released on 2020-08-28 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series of books discusses the physics of laser and matter interaction, fluid dynamics of high-temperature and high-density compressible plasma, and kinetic phenomena and particle dynamics in laser-produced plasma. The book (Vol.1) gives the physics of intense-laser absorption in matter and/or plasma in non-relativistic and relativistic laser-intensity regime. In many cases, it is explained with clear images of physics so that an intuitive understanding of individual physics is possible for non-specialists. For intense-laser of 1013-16 W/cm2, the laser energy is mainly absorbed via collisional process, where the oscillation energy is converted to thermal energy by non-adiabatic Coulomb collision with the ions. Collisionless interactions with the collective modes in plasma are also described. The main topics are the interaction of ultra-intense laser and plasma for the intensity near and over 1018W/cm2. In such regime, relativistic dynamics become essential. A new physics appears due to the relativistic effects, such as mass correction, relativistic nonlinear force, chaos physics of particle motions, and so on. The book provides clearly the theoretical base for challenging the laser-plasma interaction physics in the wide range of power lasers. It is suitable as a textbook for upper-undergraduate and graduate students as well as for readers who want to understand the whole physics structure about what happen when an intense-laser irradiates any materials including solids, gas etc. Explaining the physics intuitively without complicated mathematics, it is also a valuable resource for engineering students and researchers as well as for self-study.
Download or read book Introduction to Plasma Technology written by John Ernest Harry and published by John Wiley & Sons. This book was released on 2013-09-13 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a university lecturer with more than forty years experience in plasma technology, this book adopts a didactic approach in its coverage of the theory, engineering and applications of technological plasmas. The theory is developed in a unified way to enable brevity and clarity, providing readers with the necessary background to assess the factors that affect the behavior of plasmas under different operating conditions. The major part of the book is devoted to the applications of plasma technology and their accompanying engineering aspects, classified by the various pressure and density regimes at which plasmas can be produced. Two chapters on plasma power supplies round off the book. With its broad range of topics, from low to high pressure plasmas, from characterization to modeling, and from materials to components, this is suitable for advanced undergraduates, postgraduates and professionals in the field.
Download or read book Plasma Science and Technology written by Haikel Jelassi and published by BoD – Books on Demand. This book was released on 2019-02-27 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Usually called the "fourth state of matter," plasmas make up more than 99% of known material. In usual terminology, this term generally refers to partially or totally ionized gas and covers a large number of topics with very different characteristics and behaviors. Over the last few decades, the physics and engineering of plasmas was experiencing a renewed interest, essentially born of a series of important applications such as thin-layer deposition, surface treatment, isotopic separation, integrated circuit etchings, medicine, etc. Plasma Science
Download or read book Plasma Physics and Engineering written by Alexander Fridman and published by CRC Press. This book was released on 2004-04-15 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma engineering is a rapidly expanding area of science and technology with increasing numbers of engineers using plasma processes over a wide range of applications. An essential tool for understanding this dynamic field, Plasma Physics and Engineering provides a clear, fundamental introduction to virtually all aspects of modern plasma science and technology, including plasma chemistry and engineering, combustion, chemical physics, lasers, electronics, methods of material treatment, fuel conversion, and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics, many helpful numerical formulas for practical calculations, and an array of problems and concept questions.
Download or read book The British Chess Magazine Volume 16 written by Anonymous and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Plasma Medical Science written by Shinya Toyokuni and published by Academic Press. This book was released on 2018-07-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Medical Science describes the progress that has been made in the field over the past five years, illustrating what readers must know to be successful. As non-thermal, atmospheric pressure plasma has been applied for a wide variety of medical fields, including wound healing, blood coagulation, and cancer therapy, this book is a timely resource on the topics discussed. Provides a dedicated reference for this emerging topic Discusses the state-of-the-art developments in plasma technology Introduces topics of plasma biophysics and biochemistry that are required to understand the application of the technology for plasma medicine Brings together diverse experience in this field in one reference text Provides a roadmap for future developments in the area
Download or read book Plasma Physics and Fusion Energy written by Jeffrey P. Freidberg and published by Cambridge University Press. This book was released on 2008-07-10 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been an increase in interest worldwide in fusion research over the last decade and a half due to the recognition that a large number of new, environmentally attractive, sustainable energy sources will be needed to meet ever increasing demand for electrical energy. Based on a series of course notes from graduate courses in plasma physics and fusion energy at MIT, the text begins with an overview of world energy needs, current methods of energy generation, and the potential role that fusion may play in the future. It covers energy issues such as the production of fusion power, power balance, the design of a simple fusion reactor and the basic plasma physics issues faced by the developers of fusion power. This book is suitable for graduate students and researchers working in applied physics and nuclear engineering. A large number of problems accumulated over two decades of teaching are included to aid understanding.
Download or read book Plasma Technologies for Textiles written by Roshan Shishoo and published by Elsevier. This book was released on 2007-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma technologies present an environmentally-friendly and versatile way of treating textile materials in order to enhance a variety of properties such as wettability, liquid repellency, dyeability and coating adhesion. Recent advances made in commercially viable plasma systems have greatly increased the potential of using plasma technology in industrial textile finishing. This pioneering book provides an essential guide to both the technology and science related to plasmas and its practical applications in the textile industry. The first part of the book discusses the science and technology behind plasmas. Chapters give detailed and comprehensive descriptions on the characteristics of plasmas and methods of control and treatment in the processing of textiles. Both low pressure cold plasma and atmospheric pressure cold plasma processes are described as well as the diagnosis and control of plasma parameters in plasma generating reactors. A chapter is devoted to the use of plasma technology to achieve nanoscale treatment of textile surfaces. The second part of the book concentrates on specific applications of plasma technologies. Chapters cover treatments for water and oil repellency of textiles, engineering of biomedical textiles and woollen finishing techniques through the use of plasma technologies. Further chapters cover the modification of fibres for use in composites and the potential use of plasma technologies for the finishing of fabrics made of man made fibres. The final chapter in the book gives a comprehensive analysis of the surface chemical and physical characterisation of plasma treated fabrics. Written by a distinguished international team of experts, Plasma technologies for textiles is an invaluable reference for researchers, scientists and technologists alike. Summarises both the science and technology of plasma processing, and its practical applications Discusses how plasma technology improves textile properties such as wettability and liquid repelling An invaluable reference for researchers, scientists and technologists
Download or read book Plasma Science written by National Research Council and published by National Academies Press. This book was released on 2008-01-20 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of its current physics decadal survey, Physics 2010, the NRC was asked by the DOE, NSF, and NASA to carry out an assessment of and outlook for the broad field of plasma science and engineering over the next several years. The study was to focus on progress in plasma research, identify the most compelling new scientific opportunities, evaluate prospects for broader application of plasmas, and offer guidance to realize these opportunities. The study paid particular attention to these last two points. This "demand-side" perspective provided a clear look at what plasma research can do to help achieve national goals of fusion energy, economic competitiveness, and nuclear weapons stockpile stewardship. The report provides an examination of the broad themes that frame plasma research: low-temperature plasma science and engineering; plasma physics at high energy density; plasma science of magnetic fusion; space and astrophysical science; and basic plasma science. Within those themes, the report offers a bold vision for future developments in plasma science.
