Download or read book Plasma Production By Laser Ablation Ppla 2003 written by Lorenzo Torrisi and published by World Scientific. This book was released on 2004-10-12 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concerns the latest results on pulsed plasma production by energetic laser pulses irradiating solid targets. The produced plasma emits neutrals, clusters, ions, electrons and photons. Plasma properties depend on the laser pulse duration, energy, wavelength, focusing, target nature and irradiation conditions. Plasma expands in vacuum with supersonic velocity and may accelerate heavy ions, with charge states higher than 50+, at energies higher than 10 MeV. This book presents and discusses possible applications, such as ion injection in ECR ion sources, ion implantation, ion post-acceleration and thin film deposition by the PLD technique.The proceedings have been selected for coverage in:• Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)• Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)• CC Proceedings — Engineering & Physical Sciences

Download or read book Plasma Production by Laser Ablation PPLA 2003 written by Santo Gammino and published by World Scientific Publishing Company Incorporated. This book was released on 2004 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The First International Meeting on Pulsed Plasma Laser Ablation, PPLA2003, was held in Messina and Catania on 18 and 19 September 2003"--Pref.

Download or read book Plasma Production by Laser Ablation written by Santo Gammino and published by . This book was released on 2004 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concerns the latest results on pulsed plasma production by energetic laser pulses irradiating solid targets. The produced plasma emits neutrals, clusters, ions, electrons and photons. Plasma properties depend on the laser pulse duration, energy, wavelength, focusing, target nature and irradiation conditions. Plasma expands in vacuum with supersonic velocity and may accelerate heavy ions, with charge states higher than 50+, at energies higher than 10 MeV. This book presents and discusses possible applications, such as ion injection in ECR ion sources, ion implantation, ion post-acce.

Download or read book Laser Produced Plasmas in Liquid Environments written by Nichola Walsh and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the interaction of an intense laser pulse with a solid metal target, a high temperature, high density plasma is formed. Pulsed laser ablation has attracted much interest over the past fifty years with experimental and theoretical work largely focussed on the study of laser produced plasmas in vacuum. The study of pulsed laser ablation has been largely motivated from a materials processing perspective, with the characterisation of thin films using pulsed laser deposition of particular interest. Another application resulting from the study of laser produced plasmas is the use of laser-induced breakdown spectroscopy (LIBS) for elemental composition and quantitative analysis of samples. LIBS is now a widely used technique employed in various fields including environmental analysis, forensics and biomedical applications. While much work has been carried out on pulsed ablation of materials in vacuum and gas ambient, comparatively little research has been done on ablation in liquid media. As a result, the fundamental understanding of laser produced plasmas in liquids remains insufficient. Using techniques such as time resolved imaging and spectroscopy, a full characterisation of the plasma formed in air was undertaken as a comparison to the subsequent investigation of the plasma formed in water ambient. Single pulse studies revealed information on the dynamic evolution of a laser plasma formed in the liquid phase where strong confinement and broadband emission were the main observations. Shadowgraphy measurements were performed to examine the dynamic behaviour of the cavitation bubble that eventually forms post plasma ignition. The results of time resolved optical emission measurements from within the cavitation bubble using a second laser pulse reveal for the first time the full dynamic evolution of the plasma formed in such an environment.

Download or read book Plasma Production by Laser Ablation PPLA 2003 written by Santo Gammino and published by World Scientific. This book was released on 2004 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concerns the latest results on pulsed plasma production by energetic laser pulses irradiating solid targets. The produced plasma emits neutrals, clusters, ions, electrons and photons. Plasma properties depend on the laser pulse duration, energy, wavelength, focusing, target nature and irradiation conditions. Plasma expands in vacuum with supersonic velocity and may accelerate heavy ions, with charge states higher than 50+, at energies higher than 10 MeV. This book presents and discusses possible applications, such as ion injection in ECR ion sources, ion implantation, ion post-acceleration and thin film deposition by the PLD technique. The proceedings have been selected for coverage in: . OCo Index to Scientific & Technical Proceedings- (ISTP- / ISI Proceedings). OCo Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings). OCo CC Proceedings OCo Engineering & Physical Sciences. Contents: Experiments on the Laser Injection to ECRIS (G Arzumanyan et al.); Pulsed Laser Deposition of Diamond-Like Carbon Films in Different Ambient Atmospheres (M Bonelli et al.); Pulsed Laser Deposition of Crystalline Silicon Carbide Films (R Reitano et al.); Microscopic Description of Energy Production (A Bonasera); Laser-Produced Ions for Various Applications (L Liska et al.); Diagnostics for Laser Ion Sources (J Krisa et al.); Temperature Measurements by MaxwellOCoBoltzmann Distribution of a Plasma-Laser and Characterization of the Ion Bean (V Nassisi et al.); Flexible Laser Ion Sources for Surface Modification (F P Boody et al.); Aluminium Laser Ablation for Plasma Production (A Piccioto et al.); The Role of Secondary Electron Emission on the ECR Plasma (L Schachter et al.); Multiple Ion Implantation Effects on Wear and Wet Ability of Polyethylene Based Polymers (L Torrisi et al.); and other papers. Readership: Graduate students, academics, researchers and industrialists in laser and plasma physics."

Download or read book Laser Ablation in Liquids written by Guowei Yang and published by CRC Press. This book was released on 2012-02-22 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental concepts and physical and chemical aspects of pulsed laser ablation of solid targets in liquid environments and its applications in the preparation of nanomaterials and fabrication of nanostructures. The areas of focus include basic thermodynamic and kinetic processes of laser ablation in liquids, and its applic

Download or read book Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which a low wavelength and short pulse (ns-fs) duration of laser beam irradiates the surface of a target to induce instant local vaporization of the target material generating a plasma plume consisting of photons, electrons, ions, atoms, molecules, clusters, and liquid or solid particles. This book covers various aspects of using laser ablation phenomenon for material processing including laser ablation applied for the deposition of thin films, for the synthesis of nanomaterials, and for the chemical compositional analysis and surface modification of materials. Through the 18 chapters written by experts from international scientific community, the reader will have access to the most recent research and development findings on laser ablation through original research studies and literature reviews.

Download or read book Characterization of Expanding Laser Plasma Produced by Laser Ablation written by Antonella Lorusso and published by . This book was released on 2006 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Ablation written by Tatiana Itina and published by BoD – Books on Demand. This book was released on 2017-12-21 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shortly after the demonstration of the first laser, the most intensely studied theoretical topics dealt with laser-matter interactions. Many experiments were undertaken to clarify the major ablation mechanisms. At the same time, numerous theoretical studies, both analytical and numerical, were proposed to describe these interactions. These studies paved the ways toward the development of numerous laser applications, ranging from laser micro- and nanomachining to material analysis, nanoparticle and nanostructure formation, thin-film deposition, etc. Recently, more and more promising novel fields of laser applications have appeared, including biomedicine, catalysis, photovoltaic cells, etc. This book intends to provide the reader with a comprehensive overview of the current state of the art in laser ablation, from its fundamental mechanisms to novel applications.

Download or read book Practical Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2021-07-14 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which an intense laser beam irradiates the surface of a solid to induce instant local removal of atoms by a thermal or non-thermal mechanism. Through eight chapters of original research studies and literature reviews written by experts from the international scientific community, this book presents theoretical and experimental aspects of the laser ablation phenomenon for processing material including pulsed laser deposition of thin films, laser surface modification, laser machining and laser nanoparticle formation. It also includes a study of the dynamics of plasmas generated by laser ablation of multi-component materials and an overview of laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) techniques for chemical analysis.

Download or read book Pulsed Laser Deposition of Thin Films written by Douglas B. Chrisey and published by Wiley-Interscience. This book was released on 1994-06-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of what is required to set up and begin research in this newly developing technology and understand the basics of the process. Internationally recognized experts in their fields cover such fundamentals as history, theory, film characteristics, surface modification, laser technology, materials and applications including excellent reviews regarding the entire areas of semiconductor buffer layers, thin-film ferroelectrics and ferrites along with the work involving films deposited by PLD.

Download or read book Third Workshop Plasma Production by Laser Ablation PPLA 2007 June 14 16 2007 Scilla Italy written by and published by . This book was released on 2008 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Nanotubes From Basic Research to Nanotechnology written by Valentin N. Popov and published by Springer Science & Business Media. This book was released on 2006-04-03 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises reviews on various topics of carbon nanotube research from specialists in the field, together with reports on on-going research. Both are intended to give a detailed picture of the remarkable properties of these one-dimensional nanostructures. Particular attention is paid to the synthesis, characterization, properties, and application of nanotubes. The book will be an indispensable introduction for the newcomers in the field as well as a valuable update for researchers in the field, for it contains the most recent developments.

Download or read book Nano Antimicrobials written by Nicola Cioffi and published by Springer Science & Business Media. This book was released on 2012-02-26 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a high demand for antimicrobials for the treatment of new and emerging microbial diseases. In particular, microbes developing multidrug resistance have created a pressing need to search for a new generation of antimicrobial agents, which are effective, safe and can be used for the cure of multidrug-resistant microbial infections. Nano-antimicrobials offer effective solutions for these challenges; the details of these new technologies are presented here. The book includes chapters by an international team of experts. Chemical, physical, electrochemical, photochemical and mechanical methods of synthesis are covered. Moreover, biological synthesis using microbes, an option that is both eco-friendly and economically viable, is presented. The antimicrobial potential of different nanoparticles is also covered, bioactivity mechanisms are elaborated on, and several applications are reviewed in separate sections. Lastly, the toxicology of nano-antimicrobials is briefly assessed.

Download or read book Characterization of Plasma Produced in Laser Ablation of Metal and Multicomponent Solid Targets written by Wang Xuan and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Plasmas and Nuclear Energy written by Heinrich Hora and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of this book was written before October 1973. Thus the statements concerning the energy crisis are now dated, but remain valid nevertheless. However, the term "energy crisis" is no longer the unusual new concept it was when the material was written; it is, rather, a commonplace expression for a condition with which we are all only too familiar. The purpose of this book is to point out that the science and technology of laser-induced nuclear fusion are an extraordinary subject, which in some way not yet completely clear can solve the problem of gaining a pollution-free and really inexhaustible supply of inexpensive energy from the heavy hydrogen (deuterium) atoms found in all terrestrial waters. The concept is very obvious and very simple: To heat solid deuterium or mixtures of deuterium and tritium (superheavy hydrogen) by laser pulses so rapidly that despite the resulting expansion and cooling there still take place so many nuclear fusion reactions tnat the energy produced is greater than the laser energy that had to be applied. Compression of the plasma by the laser radiation itself is a more sophisticated refinement of the process, but one which at the present stage of laser cechnology is needed for the rapid realization of a laser-fusion reactor for power generation. This concept of compression can also be applied to the development of completely safe reactors with controlled microexplosions of laser-compressed fissionable materials such as uranium and even boron, which fission completely safely into nonradioactive helium atoms.

Download or read book Laser Ablation and Its Applications written by Claude Phipps and published by Springer Science & Business Media. This book was released on 2007 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation describes the interaction of intense optical fields with matter, in which atoms are selectively driven off by thermal or nonthermal mechanisms. The field of laser ablation physics is advancing so rapidly that its principal results are seen only in specialized journals and conferences. This is the first book that combines the most recent results in this rapidly advancing field with authoritative treatment of laser ablation and its applications, including the physics of high-power laser-matter interaction. Many practical applications exist, ranging from inertial confinement fusion to propulsion of aerostats for pollution monitoring to laser ignition of hypersonic engines to laser cleaning nanoscale contaminants in high-volume computer hard drive manufacture to direct observation of the electronic or dissociative states in atoms and molecules, to studying the properties of materials during 200kbar shocks developed in 200fs. Selecting topics which are representative of such a broad field is difficult. Laser Ablation and its Applications emphasizes the wide range of these topics rather than - as is so often the case in advanced science – focusing on one specialty or discipline. The book is divided into four sections: theory and modeling, ultrafast interactions, material processing and laser-matter interaction in novel regimes. The latter range from MALDI to ICF, SNOM’s and femtosecond nanosurgery to laser space propulsion. The book arose from the SPIE series of High Power Laser Ablation Symposia which began in 1998. It is intended for a graduate course in laser interactions with plasmas and materials, but it should be accessible to anyone with a graduate degree in physics or engineering. It is also intended as a major reference work to familiarize scientists just entering the field with laser ablation and its applications.